Part | RoHS | Manufacturer | Peripheral IC Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Package Body Material | Surface Mount | Maximum Supply Voltage | Screening Level | Address Bus Width | Maximum Output Clock Frequency | DAC Channels | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Minimum Supply Voltage | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | ADC Channels | Terminal Position | DMA Channels | Maximum Seated Height | Width | Additional Features | External Data Bus Width | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Total Dose (V) | Technology | Maximum Supply Current | Nominal Supply Voltage | PWM Channels | Sub-Category | ROM Programmability | Terminal Pitch | JESD-30 Code | Moisture Sensitivity Level (MSL) | Qualification | Speed | Nominal Primary Clock/Crystal Frequency | JESD-609 Code | No. of I/O Lines |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
3.3 |
SMALL OUTLINE, SHRINK PITCH |
TSSOP56,.3,20 |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
2.794 mm |
7.493 mm |
20 |
240 |
18.415 mm |
CMOS |
400 mA |
3.3 V |
Clock Generators |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.31818 MHz |
e0 |
||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
NO LEAD |
56 |
HVQCCN |
SQUARE |
UNSPECIFIED |
YES |
3.465 V |
156.25 MHz |
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
QUAD |
1 mm |
8 mm |
260 |
8 mm |
CMOS |
84 mA |
3.3 V |
.5 mm |
S-XQCC-N56 |
3 |
25 MHz |
e3 |
||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
3.3 |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
TSSOP56,.3,20 |
3.135 V |
70 Cel |
0 Cel |
DUAL |
1.2 mm |
6.1 mm |
NOT SPECIFIED |
NOT SPECIFIED |
14 mm |
CMOS |
350 mA |
3.3 V |
Clock Generators |
.5 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
||||||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
200 MHz |
SMALL OUTLINE, SHRINK PITCH |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
DUAL |
2.8 mm |
7.5 mm |
18.43 mm |
CMOS |
360 mA |
3.3 V |
.635 mm |
R-PDSO-G56 |
14.318 MHz |
|||||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
48 MHz |
3.3 |
SMALL OUTLINE |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.8 mm |
7.5 mm |
30 |
260 |
18.43 mm |
CMOS |
400 mA |
3.3 V |
Clock Generators |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.318 MHz |
e3 |
|||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
200 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
2.8 mm |
7.5 mm |
18.43 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
e0 |
|||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, OTHER |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
Matte Tin (Sn) - annealed |
DUAL |
2.8 mm |
7.5 mm |
30 |
260 |
18.43 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
400 MHz |
e3 |
|||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, OTHER |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
240 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.8 mm |
7.5 mm |
18.43 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
e3 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
133.3 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
TSSOP56,.3,20 |
3.135 V |
70 Cel |
0 Cel |
DUAL |
1.2 mm |
6.1 mm |
14 mm |
CMOS |
360 mA |
3.3 V |
.5 mm |
R-PDSO-G56 |
14.318 MHz |
||||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
200 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
1.2 mm |
6.1 mm |
14 mm |
CMOS |
3.3 V |
.5 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
e3 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
48 MHz |
3.3 |
SMALL OUTLINE |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.8 mm |
7.5 mm |
30 |
260 |
18.43 mm |
CMOS |
400 mA |
3.3 V |
Clock Generators |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.318 MHz |
e3 |
|||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
3.3 |
SMALL OUTLINE, SHRINK PITCH |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
7.493 mm |
20 |
225 |
18.415 mm |
CMOS |
400 mA |
3.3 V |
Clock Generators |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.318 MHz |
e0 |
|||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.8 mm |
7.5 mm |
18.43 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
e3 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
TSSOP56,.3,20 |
3.135 V |
70 Cel |
0 Cel |
TIN |
DUAL |
1.2 mm |
6.1 mm |
260 |
14 mm |
CMOS |
350 mA |
3.3 V |
.5 mm |
R-PDSO-G56 |
1 |
14.318 MHz |
e3 |
||||||||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
220 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
1.2 mm |
6.1 mm |
14 mm |
CMOS |
3.3 V |
.5 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.31818 MHz |
e0 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
NO LEAD |
56 |
HVQCCN |
SQUARE |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
LCC56,.31SQ,20 |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
QUAD |
1 mm |
8 mm |
8 mm |
CMOS |
200 mA |
3.3 V |
.5 mm |
S-PQCC-N56 |
Not Qualified |
15 MHz |
e3 |
||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
220 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.8 mm |
7.5 mm |
18.43 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.31818 MHz |
e3 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
200 MHz |
SMALL OUTLINE, SHRINK PITCH |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.8 mm |
7.5 mm |
18.43 mm |
CMOS |
360 mA |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
e3 |
||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
100 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.794 mm |
7.5 mm |
18.415 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
e3 |
||||||||||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
2.8 mm |
7.5 mm |
18.43 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.31818 MHz |
e0 |
|||||||||||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
1.2 mm |
6.1 mm |
14 mm |
CMOS |
3.3 V |
.5 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.31818 MHz |
e0 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
133.32 MHz |
SMALL OUTLINE |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.79 mm |
7.49 mm |
18.41 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
e3 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL EXTENDED |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
200 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
3.135 V |
75 Cel |
0 Cel |
MATTE TIN |
DUAL |
1.2 mm |
6.1 mm |
14 mm |
CMOS |
3.3 V |
.5 mm |
R-PDSO-G56 |
Not Qualified |
25 MHz |
e3 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
3.3 |
SMALL OUTLINE, SHRINK PITCH |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.8 mm |
7.5 mm |
30 |
260 |
18.43 mm |
CMOS |
350 mA |
3.3 V |
Clock Generators |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.31818 MHz |
e3 |
|||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
1.2 mm |
6.1 mm |
14 mm |
CMOS |
3.3 V |
.5 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.31818 MHz |
e0 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, OTHER |
INDUSTRIAL |
NO LEAD |
56 |
HVQCCN |
SQUARE |
UNSPECIFIED |
YES |
3.465 V |
250 MHz |
3.3 |
CHIP CARRIER |
LCC56,.31SQ,20 |
3.135 V |
85 Cel |
-40 Cel |
MATTE TIN |
QUAD |
1 mm |
8 mm |
30 |
260 |
8 mm |
CMOS |
275 mA |
3.3 V |
Clock Generators |
.5 mm |
S-XQCC-N56 |
3 |
Not Qualified |
25 MHz |
e3 |
|||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
Matte Tin (Sn) - annealed |
DUAL |
2.8 mm |
7.5 mm |
30 |
260 |
18.43 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
400 MHz |
e3 |
|||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
INDUSTRIAL |
NO LEAD |
56 |
HVQCCN |
SQUARE |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
3.135 V |
85 Cel |
-40 Cel |
MATTE TIN |
QUAD |
1 mm |
8 mm |
8 mm |
CMOS |
3.3 V |
.5 mm |
S-PQCC-N56 |
14.318 MHz |
e3 |
|||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
200 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.8 mm |
7.5 mm |
18.43 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
e3 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
3.3 |
SMALL OUTLINE, SHRINK PITCH |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
Matte Tin (Sn) - annealed |
DUAL |
7.493 mm |
30 |
260 |
18.415 mm |
CMOS |
400 mA |
3.3 V |
Clock Generators |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
48 MHz |
e3 |
||||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
200.4 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
2.8 mm |
7.5 mm |
15.875 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.31818 MHz |
e0 |
|||||||||||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
150 MHz |
SMALL OUTLINE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
2.794 mm |
7.5 mm |
ALSO REQUIRES 2.5V SUPPLY |
18.415 mm |
CMOS |
3.3 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
e0 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
TSSOP56,.3,20 |
3.135 V |
70 Cel |
0 Cel |
TIN |
DUAL |
1.2 mm |
6.1 mm |
260 |
14 mm |
CMOS |
350 mA |
3.3 V |
.5 mm |
R-PDSO-G56 |
1 |
14.318 MHz |
e3 |
||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
NO LEAD |
56 |
HVQCCN |
SQUARE |
UNSPECIFIED |
YES |
1.575 V |
200 MHz |
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
1.425 V |
70 Cel |
0 Cel |
TIN |
QUAD |
1 mm |
7 mm |
260 |
7 mm |
CMOS |
1.5 V |
.4 mm |
S-XQCC-N56 |
3 |
25 MHz |
e3 |
|||||||||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
3.3 |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
TSSOP56,.3,20 |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
7.493 mm |
20 |
240 |
18.415 mm |
CMOS |
400 mA |
3.3 V |
Clock Generators |
.5 mm |
R-PDSO-G56 |
1 |
Not Qualified |
48 MHz |
e0 |
|||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
48 MHz |
3.3 |
SMALL OUTLINE |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.8 mm |
7.5 mm |
30 |
260 |
18.43 mm |
CMOS |
400 mA |
3.3 V |
Clock Generators |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.318 MHz |
e3 |
|||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
3.3 |
SMALL OUTLINE, SHRINK PITCH |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
Matte Tin (Sn) - annealed |
DUAL |
7.493 mm |
30 |
260 |
18.415 mm |
CMOS |
400 mA |
3.3 V |
Clock Generators |
.635 mm |
R-PDSO-G56 |
1 |
Not Qualified |
48 MHz |
e3 |
||||||||||||||
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
DUAL |
1.2 mm |
6.1 mm |
14 mm |
CMOS |
3.3 V |
.5 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.31818 MHz |
e0 |
||||||||||||||||||||
Renesas Electronics |
CLOCK GENERATOR, OTHER |
INDUSTRIAL |
NO LEAD |
56 |
VQCCN |
SQUARE |
UNSPECIFIED |
YES |
3.465 V |
250 MHz |
CHIP CARRIER, VERY THIN PROFILE |
3.135 V |
85 Cel |
-40 Cel |
TIN LEAD |
QUAD |
1 mm |
8 mm |
8 mm |
CMOS |
3.3 V |
.5 mm |
S-XQCC-N56 |
Not Qualified |
25 MHz |
e0 |
|||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
1.2 mm |
6.1 mm |
14 mm |
CMOS |
3.3 V |
.5 mm |
R-PDSO-G56 |
Not Qualified |
400 MHz |
e3 |
||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
INDUSTRIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC |
YES |
3.465 V |
400 MHz |
3.3 |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
TSSOP56,.3,20 |
3.135 V |
85 Cel |
-40 Cel |
Matte Tin (Sn) - annealed |
DUAL |
1.2 mm |
6.1 mm |
30 |
260 |
14 mm |
CMOS |
115 mA |
3.3 V |
Clock Generators |
.5 mm |
R-PDSO-G56 |
1 |
Not Qualified |
15 MHz |
e3 |
|||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
133.32 MHz |
2.5,3.3 |
SMALL OUTLINE, SHRINK PITCH |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
DUAL |
7.493 mm |
30 |
260 |
18.415 mm |
CMOS |
180 mA |
3.3 V |
Clock Generators |
.635 mm |
R-PDSO-G56 |
Not Qualified |
14.318 MHz |
|||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
133.3 MHz |
SMALL OUTLINE, SHRINK PITCH |
SSOP56,.4 |
3.135 V |
70 Cel |
0 Cel |
DUAL |
2.794 mm |
7.493 mm |
18.415 mm |
CMOS |
360 mA |
3.3 V |
.635 mm |
R-PDSO-G56 |
14.318 MHz |
||||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
NO LEAD |
56 |
HVQCCN |
SQUARE |
UNSPECIFIED |
YES |
3.465 V |
25 MHz |
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
LCC56,.31SQ,20 |
3.135 V |
85 Cel |
-40 Cel |
TIN |
QUAD |
1 mm |
8 mm |
260 |
8 mm |
CMOS |
132 mA |
3.3 V |
.5 mm |
S-XQCC-N56 |
3 |
133.33 MHz |
e3 |
||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
400 MHz |
3.3 |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
TSSOP56,.3,20 |
3.135 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
1.2 mm |
6.1 mm |
30 |
260 |
14 mm |
CMOS |
350 mA |
3.3 V |
Clock Generators |
.5 mm |
R-PDSO-G56 |
1 |
Not Qualified |
14.318 MHz |
e3 |
|||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
OTHER |
GULL WING |
56 |
TSSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
3.465 V |
200 MHz |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
3.135 V |
90 Cel |
0 Cel |
DUAL |
1.2 mm |
6.1 mm |
NOT SPECIFIED |
NOT SPECIFIED |
14 mm |
CMOS |
3.3 V |
.5 mm |
R-PDSO-G56 |
14.318 MHz |
|||||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
GULL WING |
56 |
HVQCCN |
SQUARE |
PLASTIC/EPOXY |
YES |
3.465 V |
133.33 MHz |
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
LCC56,.31SQ,20 |
3.135 V |
70 Cel |
0 Cel |
TIN |
QUAD |
1 mm |
8 mm |
260 |
8 mm |
CMOS |
350 mA |
3.3 V |
.5 mm |
S-XQCC-N56 |
3 |
25 MHz |
e3 |
||||||||||||||||||
|
Renesas Electronics |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
56 |
SSOP |
RECTANGULAR |
PLASTIC/EPOXY |
YES |
2.625 V |
200 MHz |
SMALL OUTLINE, SHRINK PITCH |
2.375 V |
70 Cel |
0 Cel |
MATTE TIN |
DUAL |
2.794 mm |
7.5 mm |
CAN ALSO OPERATE AT 3.3V SUPPLY |
18.415 mm |
CMOS |
2.5 V |
.635 mm |
R-PDSO-G56 |
Not Qualified |
16 MHz |
e3 |
A clock generator is an electronic circuit that generates an electrical signal that serves as a timing reference for other circuits in a system. Clock generators are used in many electronic devices, such as computers, cell phones, and digital cameras. The clock signal is used to synchronize the operation of different components in the system, such as microprocessors, memory devices, and input/output interfaces.
Clock generators can be classified based on their output frequency and stability. Some clock generators produce a fixed frequency output, while others have a programmable output frequency. The stability of the clock signal is also an important parameter, and clock generators can be designed to produce a stable frequency output over a wide range of temperature and voltage conditions.
Clock generators can also include additional features such as frequency multiplication, frequency division, and phase locking. Frequency multiplication allows the output frequency to be multiplied by an integer value, while frequency division allows the output frequency to be divided by an integer value. Phase locking is used to ensure that the output frequency of the clock generator is synchronized with an external reference signal.