TSSOP Clock Generators 2,281

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Maximum Output Clock Frequency	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Nominal Primary Clock/Crystal Frequency	JESD-609 Code
935270395112	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			12.5 mm	CMOS		3.3 V		.5 mm	R-PDSO-G48		Not Qualified	14.31818 MHz
PCK2023DGG,512	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			14 mm	CMOS		3.3 V		.5 mm	R-PDSO-G56			14.31818 MHz
935270445112	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			14 mm	CMOS		3.3 V		.5 mm	R-PDSO-G56			14.31818 MHz
74LVC1GX04GW,125	NXP Semiconductors	CLOCK GENERATOR, OTHER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.65 V	125 Cel	-40 Cel	Tin (Sn)	DUAL	1.1 mm	1.25 mm	30	260	2 mm	CMOS		1.8 V		.65 mm	R-PDSO-G6	1	Not Qualified		e3
935270445518	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			14 mm	CMOS		3.3 V		.5 mm	R-PDSO-G56			14.31818 MHz
TDA6651TT/C3/S2	NXP Semiconductors	CLOCK GENERATOR, VIDEO		GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 V				QUAD	1.1 mm	4.4 mm			9.7 mm	CMOS		5 V		.5 mm	R-PDSO-G38		Not Qualified	.4 MHz
935274024125	NXP Semiconductors	CLOCK GENERATOR, OTHER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.65 V	125 Cel	-40 Cel		DUAL	1.1 mm	1.25 mm			2 mm	CMOS		1.8 V		.65 mm	R-PDSO-G6
TDA6651TT/C3	NXP Semiconductors	CLOCK GENERATOR, VIDEO		GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 V				DUAL	1.1 mm	4.4 mm			9.7 mm	CMOS		5 V		.5 mm	R-PDSO-G38		Not Qualified	902.15 MHz
PCK2022RADGG-T	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			12.5 mm	CMOS		3.3 V		.5 mm	R-PDSO-G48		Not Qualified	14.31818 MHz
74LVC1GX04GV	NXP Semiconductors	CLOCK GENERATOR, OTHER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP6,.11,37	1.65 V	125 Cel	-40 Cel	Tin (Sn)	DUAL	1.1 mm	1.5 mm	30	260	2.9 mm	CMOS	100 mA	1.8 V	Clock Generators	.95 mm	R-PDSO-G6	1	Not Qualified		e3
PCK2023DGG	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3.135 V	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm	6.1 mm	30	260	14 mm	CMOS	280 mA	3.3 V	Clock Generators	.5 mm	R-PDSO-G56	2	Not Qualified	14.31818 MHz	e4
TDA6651TT/C3/S3	NXP Semiconductors	CLOCK GENERATOR, VIDEO		GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 V				DUAL	1.1 mm	4.4 mm			9.7 mm	CMOS		5 V		.5 mm	R-PDSO-G38		Not Qualified	.4 MHz
PCK2022RDGG	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			12.5 mm	CMOS		3.3 V		.5 mm	R-PDSO-G48		Not Qualified	14.318 MHz
74LVC1GX04GW	NXP Semiconductors	CLOCK GENERATOR, OTHER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP6,.08	1.65 V	125 Cel	-40 Cel	Tin (Sn)	DUAL	1.1 mm	1.25 mm	30	260	2 mm	CMOS	100 mA	1.8 V	Clock Generators	.65 mm	R-PDSO-G6	1	Not Qualified		e3
PCK2021DGG	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			12.5 mm	CMOS	250 mA	3.3 V	Clock Generators	.5 mm	R-PDSO-G48	1	Not Qualified	14.31818 MHz
935269846118	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			12.5 mm	CMOS		3.3 V		.5 mm	R-PDSO-G48		Not Qualified	14.31818 MHz
TDA6650TT/C3	NXP Semiconductors	CLOCK GENERATOR, VIDEO		GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 V				DUAL	1.1 mm	4.4 mm			9.7 mm	CMOS		5 V		.5 mm	R-PDSO-G38		Not Qualified	902.15 MHz
935269846112	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			12.5 mm	CMOS		3.3 V		.5 mm	R-PDSO-G48		Not Qualified	14.31818 MHz
935274025125	NXP Semiconductors	CLOCK GENERATOR, OTHER	AUTOMOTIVE	GULL WING	6	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		1.65 V	125 Cel	-40 Cel		DUAL	1.1 mm	1.5 mm			2.9 mm	CMOS		1.8 V		.95 mm	R-PDSO-G6
PCK2022RDGG-T	NXP Semiconductors	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.2 mm	6.1 mm			12.5 mm	CMOS		3.3 V		.5 mm	R-PDSO-G48		Not Qualified	14.318 MHz
MB88155PFT-G-102-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	25 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	25 MHz
MB88155PFT-G-112-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	25 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	25 MHz
MB88155PFT-G-412-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	80 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	20 MHz
MB88155PFT-G-103-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	50 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	50 MHz
MB88155PFT-G-113-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	50 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	50 MHz
W237X	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	66.6 MHz	2.5,3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3.135 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		6.1 mm			12.5 mm	CMOS		3.3 V	Clock Generators	.5 mm	R-PDSO-G48		Not Qualified	14.3181 MHz	e0
MB88155PFT-G-402-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	80 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	20 MHz
MB88155PFT-G-101-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	50 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	50 MHz
MB88155PFT-G-100-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	25 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	25 MHz
CY26121KZXC-21	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	33.33 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3.135 V	70 Cel	0 Cel	MATTE TIN	DUAL	1.1 mm	4.4 mm	20	260	5 mm	CMOS	60 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G16	3	Not Qualified	25 MHz	e3
MB88155PFT-G-110-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	25 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	25 MHz
MB88155PFT-G-410-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	80 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	20 MHz
MB88155PFT-G-111-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	50 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	50 MHz
MB88155PFT-G-400-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	80 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	20 MHz
IMISC671CTB	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	66.8 MHz	2.5,3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3.135 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.52 mm			15.88 mm	CMOS	90 mA	3.3 V	Clock Generators	.5 mm	R-PDSO-G48		Not Qualified	14.318 MHz	e0
CY26121KZXC-21T	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	33.33 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3.135 V	70 Cel	0 Cel	Matte Tin (Sn)	DUAL	1.1 mm	4.4 mm	20	260	5 mm	CMOS	60 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G16	3	Not Qualified	25 MHz	e3
MB88155PFT-G-102-JN-ERE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	25 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	25 MHz
CY25100KZXI-XXXT	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.45 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.13 V	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	1.1 mm	3 mm	20	260	4.4 mm	CMOS		3.3 V		.65 mm	R-PDSO-G8	3	Not Qualified	166 MHz	e3
CY25100ZXIF	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.45 V	200 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3.13 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	3 mm	20	260	4.4 mm	CMOS	35 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8	3	Not Qualified	166 MHz	e3
CY25100ZXCF	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.45 V	200 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3.13 V	70 Cel	0 Cel	MATTE TIN	DUAL	1.1 mm	3 mm	20	260	4.4 mm	CMOS	35 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8	3	Not Qualified	166 MHz	e3
CY25100ZXIXX	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.45 V	200 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3.13 V	85 Cel	-40 Cel	Matte Tin (Sn)	DUAL	1.1 mm	3 mm	20	260	4.4 mm	CMOS	35 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8	3	Not Qualified	166 MHz	e3
CY25200ZXC-XXXT	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.1 mm	4.4 mm			5 mm	CMOS		3.3 V		.65 mm	R-PDSO-G16			166 MHz
CY25100KZXIF	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.45 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.13 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	3 mm	20	260	4.4 mm	CMOS		3.3 V		.65 mm	R-PDSO-G8	3	Not Qualified	166 MHz	e3
CY25100ZXCFT	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.45 V	200 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3.13 V	70 Cel	0 Cel	MATTE TIN	DUAL	1.1 mm	3 mm	20	260	4.4 mm	CMOS	35 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8	3	Not Qualified	166 MHz	e3
CY25404ZXC-XXXT	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	20	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	166 MHz	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.25 V	70 Cel	0 Cel	MATTE TIN	DUAL	1.1 mm	4.4 mm	20	260	6.5 mm	CMOS		2.5 V	Clock Generators	.65 mm	R-PDSO-G20	3	Not Qualified	166 MHz	e3
CY25100ZXCXXT	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.45 V	200 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3.13 V	70 Cel	0 Cel	Matte Tin (Sn)	DUAL	1.1 mm	3 mm	20	260	4.4 mm	CMOS	35 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8	3	Not Qualified	166 MHz	e3
CY25200ZXC-XXX	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	200 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3.135 V	70 Cel	0 Cel		DUAL	1.1 mm	4.4 mm			5 mm	CMOS		3.3 V		.65 mm	R-PDSO-G16			166 MHz
CY25404ZXI-XXXT	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	20	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	166 MHz	2.5/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	2.25 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	4.4 mm	20	260	6.5 mm	CMOS		2.5 V	Clock Generators	.65 mm	R-PDSO-G20	3	Not Qualified	166 MHz	e3

Clock Generators

A clock generator is an electronic circuit that generates an electrical signal that serves as a timing reference for other circuits in a system. Clock generators are used in many electronic devices, such as computers, cell phones, and digital cameras. The clock signal is used to synchronize the operation of different components in the system, such as microprocessors, memory devices, and input/output interfaces.

Clock generators can be classified based on their output frequency and stability. Some clock generators produce a fixed frequency output, while others have a programmable output frequency. The stability of the clock signal is also an important parameter, and clock generators can be designed to produce a stable frequency output over a wide range of temperature and voltage conditions.

Clock generators can also include additional features such as frequency multiplication, frequency division, and phase locking. Frequency multiplication allows the output frequency to be multiplied by an integer value, while frequency division allows the output frequency to be divided by an integer value. Phase locking is used to ensure that the output frequency of the clock generator is synchronized with an external reference signal.