RECTANGULAR Clock Generators 2,400+

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Screening Level	Maximum Output Clock Frequency	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Nominal Primary Clock/Crystal Frequency	JESD-609 Code
CY24210-3	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V		100 MHz	3.3	SMALL OUTLINE	SOP8,.25	3.14 V	70 Cel	0 Cel		DUAL		3.89 mm			4.895 mm	CMOS	35 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	14.318 MHz
CY24210-4	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V		100 MHz	3.3	SMALL OUTLINE	SOP8,.25	3.14 V	70 Cel	0 Cel		DUAL		3.89 mm			4.895 mm	CMOS	35 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	14.318 MHz
IMSSG559AYB	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		99.8 MHz	2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.135 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		5.3 mm			10.2 mm	CMOS	140 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G28		Not Qualified	14.318 MHz	e0
W153F	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		66.6 MHz	2.5/3.3,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	3.135 V	70 Cel	0 Cel		DUAL		7.49 mm			15.88 mm	CMOS	365 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G48		Not Qualified	14.3181 MHz
W180-01	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		66.6 MHz	3.3/5	SMALL OUTLINE	SOP8,.25	3.135 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		3.94 mm			4.93 mm	CMOS	32 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	14.3181 MHz	e0
W237X	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		66.6 MHz	2.5,3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3.135 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		6.1 mm			12.5 mm	CMOS		3.3 V	Clock Generators	.5 mm	R-PDSO-G48		Not Qualified	14.3181 MHz	e0
IMISC410AXB	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V		66.6 MHz	5	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	3 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		5.3 mm			8.2 mm	CMOS		5 V	Clock Generators	.635 mm	R-PDSO-G24		Not Qualified	14.3181 MHz	e0
W180-02	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		66.6 MHz	3.3/5	SMALL OUTLINE	SOP8,.25	3.135 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		3.94 mm			4.93 mm	CMOS	32 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	14.3181 MHz	e0
IMISG750CYB	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			66.6 MHz	2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.49 mm			15.88 mm	CMOS	350 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G48		Not Qualified	14.3181 MHz	e0
CY24210-6	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V		100 MHz	3.3	SMALL OUTLINE	SOP8,.25	3.14 V	70 Cel	0 Cel		DUAL		3.89 mm			4.895 mm	CMOS	35 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	14.318 MHz
IMISC403ACT	Infineon Technologies		MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO				5	IN-LINE	DIP20,.3		125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL						CMOS		5 V	Clock Generators	2.54 mm	R-XDIP-T20		Not Qualified		e0
IMISG508APB	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V		100 MHz	5	IN-LINE	DIP16,.3	4 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.62 mm			19.05 mm	CMOS	30 mA	5 V	Clock Generators	2.54 mm	R-PDIP-T16		Not Qualified	14.318 MHz	e0
MB88154APNF-G-101-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		80 MHz	3.3	SMALL OUTLINE	SOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.75 mm	3.9 mm			5.05 mm	CMOS	7 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	80 MHz
IMISG508AXB	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V		100 MHz	5	SMALL OUTLINE	SOP16,.4	4 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.52 mm			10.34 mm	CMOS	30 mA	5 V	Clock Generators	1.27 mm	R-PDSO-G16		Not Qualified	14.318 MHz	e0
MB88155PFT-G-402-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		80 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	20 MHz
IMISC402APB	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	7 V		66.6 MHz	5	IN-LINE	DIP20,.3	3 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		7.62 mm			26.16 mm	CMOS		5 V	Clock Generators	2.54 mm	R-PDIP-T20		Not Qualified	14.3181 MHz	e0
IMISG577CYB	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			66.6 MHz	2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.49 mm			15.88 mm	CMOS	175 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G48		Not Qualified	14.3181 MHz	e0
W48S88-01H	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		66.8 MHz	2.5,2.5/3.3,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP56,.4	3.135 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.52 mm			18.42 mm	CMOS		3.3 V	Clock Generators	.635 mm	R-PDSO-G56		Not Qualified	14.318 MHz	e0
MB881822BWQN-G-JN-ERE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1.95 V		100 MHz	1.8,2.6	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.1X.14,16	1.65 V	85 Cel	-40 Cel		QUAD	.8 mm	2.5 mm			3.5 mm	CMOS	11 mA	1.8 V	Clock Generators	.4 mm	R-PQCC-N24		Not Qualified	30 MHz
MB88155PFT-G-101-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		50 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	50 MHz
MB881821BWQN-G-JN-ERE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1.95 V		100 MHz	1.8,2.6	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.1X.14,16	1.65 V	85 Cel	-40 Cel		QUAD	.8 mm	2.5 mm			3.5 mm	CMOS	11 mA	1.8 V	Clock Generators	.4 mm	R-PQCC-N24		Not Qualified	30 MHz
MB88155PFT-G-100-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		25 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	25 MHz
CY24210-5	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V		100 MHz	3.3	SMALL OUTLINE	SOP8,.25	3.14 V	70 Cel	0 Cel		DUAL		3.89 mm			4.895 mm	CMOS	35 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	14.318 MHz
IMISC402ACT	Infineon Technologies		MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO				5	IN-LINE	DIP20,.3		125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL						CMOS		5 V	Clock Generators	2.54 mm	R-XDIP-T20		Not Qualified		e0
ICD2025-S1	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		100 MHz	5	SMALL OUTLINE	SOP16,.4	4.75 V	70 Cel	0 Cel		DUAL		7.505 mm			10.34 mm	CMOS	60 mA	5 V	Clock Generators	1.27 mm	R-PDSO-G16		Not Qualified	26 MHz
ICD2027SC	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		100 MHz	5	SMALL OUTLINE	SOP20,.4	4.75 V	70 Cel	0 Cel		DUAL		7.5057 mm			13.97 mm	CMOS	65 mA	5 V	Clock Generators	1.27 mm	R-PDSO-G20		Not Qualified	14.3181 MHz
IMISC674BYB	Infineon Technologies		COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP56,.4		70 Cel	0 Cel	TIN LEAD	DUAL							88 mA		Clock Generators	.635 mm	R-PDSO-G56		Not Qualified		e0
MB881821AWQN-G-JN-ERE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1.95 V		100 MHz	1.8,2.6	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.1X.14,16	1.65 V	85 Cel	-40 Cel		QUAD	.8 mm	2.5 mm			3.5 mm	CMOS	11 mA	1.8 V	Clock Generators	.4 mm	R-PQCC-N24		Not Qualified	30 MHz
IMISG571BYB	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			66.6 MHz	2.5/3.3,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.49 mm			15.88 mm	CMOS		3.3 V	Clock Generators	.635 mm	R-PDSO-G48		Not Qualified	14.3181 MHz	e0
CY26121KZXC-21	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		33.33 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3.135 V	70 Cel	0 Cel	MATTE TIN	DUAL	1.1 mm	4.4 mm	20	260	5 mm	CMOS	60 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G16	3	Not Qualified	25 MHz	e3
MB88155PFT-G-110-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		25 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	25 MHz
W48C111-11H	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		100 MHz	2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3.135 V	70 Cel	0 Cel	TIN LEAD	DUAL		5.3 mm			10.2 mm	CMOS	120 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G28		Not Qualified	14.3181 MHz	e0
MB88155PFT-G-410-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		80 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	20 MHz
IMISG745BYB	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		66.6 MHz	2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	3.135 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.52 mm			15.88 mm	CMOS	116 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G48		Not Qualified	14.3181 MHz	e0
MB88155PFT-G-111-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		50 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.2 mm	3.1 mm			4.4 mm	CMOS	7 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G8		Not Qualified	50 MHz
W48S87-04AH	Infineon Technologies		COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				2.5/3.3,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL							365 mA		Clock Generators	.635 mm	R-PDSO-G48		Not Qualified		e0
IMISC402AXB	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V		66.6 MHz	5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	3 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL		5.3 mm			7.2 mm	CMOS		5 V	Clock Generators	.635 mm	R-PDSO-G20		Not Qualified	14.3181 MHz	e0
SC309AZB	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V		49.152 MHz	3.3	SMALL OUTLINE	SOP8,.25	3.135 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL	1.73 mm	3.94 mm			4.93 mm	CMOS	25 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	31.33 MHz	e0
CY2411SCT	Infineon Technologies		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				3.3	SMALL OUTLINE	SOP8,.25		70 Cel	0 Cel		DUAL							20 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified
IMISG511YB	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		60 MHz	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		5.3 mm			10.2 mm	CMOS	35 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G28		Not Qualified	5.3 MHz	e0
MB88151APNF-G-801-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		133.6 MHz	3.3	SMALL OUTLINE	SOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.75 mm	3.9 mm			5.05 mm	CMOS	7 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	16.7 MHz
MB88154APNF-G-103-JNE1	Infineon Technologies	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		40 MHz	3.3	SMALL OUTLINE	SOP8,.25	3 V	85 Cel	-40 Cel		DUAL	1.75 mm	3.9 mm			5.05 mm	CMOS	7 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G8		Not Qualified	40 MHz
IMISG536AXB	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		100 MHz	3.3/5	SMALL OUTLINE	SOP16,.4	4.75 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.505 mm			10.34 mm	CMOS	40 mA	5 V	Clock Generators	1.27 mm	R-PDSO-G16		Not Qualified	26 MHz	e0
IMISC402ACK	Infineon Technologies		MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO		38535Q/M;38534H;883B		5	IN-LINE	DIP20,.3		125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL						CMOS		5 V	Clock Generators	2.54 mm	R-XDIP-T20		Not Qualified		e0
IMISC676EYB	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			66.6 MHz	2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.49 mm			15.88 mm	CMOS	90 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G48		Not Qualified	14.3181 MHz	e0
IMISC410ACT	Infineon Technologies		MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO				5	IN-LINE	DIP24,.3		125 Cel	-55 Cel	Tin/Lead (Sn/Pb)	DUAL						CMOS		5 V	Clock Generators	2.54 mm	R-XDIP-T24		Not Qualified		e0
IMISC675AYB	Infineon Technologies	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V		66.6 MHz	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	3 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		5.3 mm			7.2 mm	CMOS	28 mA	3 V	Clock Generators	.635 mm	R-PDSO-G20		Not Qualified	14.3181 MHz	e0
W42C32-05	Infineon Technologies	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V		100 MHz	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.4	4.75 V	70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL		7.505 mm			10.34 mm	CMOS	45 mA	5 V	Clock Generators	.635 mm	R-PDSO-G16		Not Qualified	26 MHz	e0

Clock Generators

A clock generator is an electronic circuit that generates an electrical signal that serves as a timing reference for other circuits in a system. Clock generators are used in many electronic devices, such as computers, cell phones, and digital cameras. The clock signal is used to synchronize the operation of different components in the system, such as microprocessors, memory devices, and input/output interfaces.

Clock generators can be classified based on their output frequency and stability. Some clock generators produce a fixed frequency output, while others have a programmable output frequency. The stability of the clock signal is also an important parameter, and clock generators can be designed to produce a stable frequency output over a wide range of temperature and voltage conditions.

Clock generators can also include additional features such as frequency multiplication, frequency division, and phase locking. Frequency multiplication allows the output frequency to be multiplied by an integer value, while frequency division allows the output frequency to be divided by an integer value. Phase locking is used to ensure that the output frequency of the clock generator is synchronized with an external reference signal.