Part | RoHS | Manufacturer | Peripheral IC Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Package Body Material | Surface Mount | Maximum Supply Voltage | Screening Level | Address Bus Width | Maximum Output Clock Frequency | DAC Channels | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Minimum Supply Voltage | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | ADC Channels | Terminal Position | DMA Channels | Maximum Seated Height | Width | Additional Features | External Data Bus Width | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Total Dose (V) | Technology | Maximum Supply Current | Nominal Supply Voltage | PWM Channels | Sub-Category | ROM Programmability | Terminal Pitch | JESD-30 Code | Moisture Sensitivity Level (MSL) | Qualification | Speed | Nominal Primary Clock/Crystal Frequency | JESD-609 Code | No. of I/O Lines |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Broadcom |
|||||||||||||||||||||||||||||||||||||||||||||||
Broadcom |
|||||||||||||||||||||||||||||||||||||||||||||||
Broadcom |
|||||||||||||||||||||||||||||||||||||||||||||||
Broadcom |
|||||||||||||||||||||||||||||||||||||||||||||||
Broadcom |
CLOCK GENERATOR, OTHER |
COMMERCIAL |
GULL WING |
32 |
LQFP |
SQUARE |
PLASTIC/EPOXY |
YES |
3.465 V |
1000 MHz |
FLATPACK, LOW PROFILE |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
QUAD |
1.6 mm |
7 mm |
30 |
240 |
7 mm |
CMOS |
3.3 V |
.8 mm |
S-PQFP-G32 |
Not Qualified |
125 MHz |
e0 |
|||||||||||||||||||
Broadcom |
|||||||||||||||||||||||||||||||||||||||||||||||
Broadcom |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
INDUSTRIAL |
GULL WING |
52 |
TQFP |
SQUARE |
PLASTIC/EPOXY |
YES |
3.465 V |
240 MHz |
FLATPACK, THIN PROFILE |
3.135 V |
85 Cel |
-40 Cel |
TIN LEAD |
QUAD |
1.2 mm |
10 mm |
30 |
240 |
10 mm |
CMOS |
3.3 V |
.65 mm |
S-PQFP-G52 |
Not Qualified |
25 MHz |
e0 |
|||||||||||||||||||
Broadcom |
CLOCK GENERATOR, PROCESSOR SPECIFIC |
COMMERCIAL |
GULL WING |
32 |
LQFP |
SQUARE |
PLASTIC/EPOXY |
YES |
3.465 V |
180 MHz |
FLATPACK, LOW PROFILE |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
QUAD |
1.6 mm |
7 mm |
30 |
240 |
7 mm |
CMOS |
3.3 V |
.8 mm |
S-PQFP-G32 |
Not Qualified |
25 MHz |
e0 |
|||||||||||||||||||
Broadcom |
CLOCK GENERATOR, OTHER |
COMMERCIAL |
GULL WING |
32 |
LQFP |
SQUARE |
PLASTIC/EPOXY |
YES |
3.465 V |
1000 MHz |
FLATPACK, LOW PROFILE |
3.135 V |
70 Cel |
0 Cel |
TIN LEAD |
QUAD |
1.6 mm |
7 mm |
30 |
240 |
7 mm |
CMOS |
3.3 V |
.8 mm |
S-PQFP-G32 |
Not Qualified |
125 MHz |
e0 |
|||||||||||||||||||
Broadcom |
A clock generator is an electronic circuit that generates an electrical signal that serves as a timing reference for other circuits in a system. Clock generators are used in many electronic devices, such as computers, cell phones, and digital cameras. The clock signal is used to synchronize the operation of different components in the system, such as microprocessors, memory devices, and input/output interfaces.
Clock generators can be classified based on their output frequency and stability. Some clock generators produce a fixed frequency output, while others have a programmable output frequency. The stability of the clock signal is also an important parameter, and clock generators can be designed to produce a stable frequency output over a wide range of temperature and voltage conditions.
Clock generators can also include additional features such as frequency multiplication, frequency division, and phase locking. Frequency multiplication allows the output frequency to be multiplied by an integer value, while frequency division allows the output frequency to be divided by an integer value. Phase locking is used to ensure that the output frequency of the clock generator is synchronized with an external reference signal.