Texas Instruments Clock Generators 432

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Maximum Output Clock Frequency	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	Additional Features	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Nominal Primary Clock/Crystal Frequency	JESD-609 Code
TIM9904ANA	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				IN-LINE	DIP20,.3		85 Cel	-40 Cel		DUAL							TTL	85 mA		Clock Generators	2.54 mm	R-PDIP-T20		Not Qualified
SN74LS424J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			5,12	IN-LINE	DIP16,.3		70 Cel	0 Cel		DUAL				NOT SPECIFIED	NOT SPECIFIED		CMOS	115 mA		Clock Generators	2.54 mm	R-XDIP-T16		Not Qualified
CDC924DLG4	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	OTHER	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	133 MHz	2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP56,.4	3.135 V	85 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	2.79 mm	7.49 mm	ALSO REQUIRES 2.5V SUPPLY	30	260	18.415 mm	CMOS	35 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G56	2	Not Qualified	14.318 MHz	e4
SN74LS320N	Texas Instruments	CLOCK GENERATOR, OTHER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	20 MHz		IN-LINE		4.75 V	70 Cel	0 Cel		DUAL	5.08 mm	7.62 mm		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	BIPOLAR	70 mA	5 V		2.54 mm	R-PDIP-T16		Not Qualified	20 MHz
CDCDLP223PWRG4	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	300 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm	4.4 mm		30	260	6.5 mm	CMOS		3.3 V	Clock Generators	.65 mm	R-PDSO-G20	1	Not Qualified	20 MHz	e4
V62/18602-01XE	Texas Instruments	CLOCK GENERATOR, OTHER	OTHER	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.45 V	3080 MHz		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	3.15 V	105 Cel	-55 Cel	Tin/Lead (Sn/Pb)	QUAD	.8 mm	9 mm			260	9 mm	CMOS	670 mA	3.3 V		.5 mm	S-XQCC-N64	3		40 MHz	e0
CDC421250RGET	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	250 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	31.25 MHz	e4
CDC9841DW	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	66 MHz	3.3	SMALL OUTLINE	SOP28,.4	3.135 V	70 Cel	0 Cel		DUAL	2.65 mm	7.5 mm		NOT SPECIFIED	NOT SPECIFIED	17.9 mm	MOS	50 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G28		Not Qualified	14.31818 MHz
CDC924DLR	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	OTHER	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	133 MHz	2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP56,.4	3.135 V	85 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	2.79 mm	7.49 mm	ALSO REQUIRES 2.5V SUPPLY	30	260	18.415 mm	CMOS		3.3 V	Clock Generators	.635 mm	R-PDSO-G56	2	Not Qualified	14.318 MHz	e4
CDC421312RGER	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	312.5 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	31.25 MHz	e4
PLL1700EGE6	Texas Instruments	CLOCK GENERATOR, VIDEO	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	33.8688 MHz	3.3,5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.5 V	85 Cel	-25 Cel	TIN BISMUTH	DUAL	2 mm	5.3 mm	ALSO REQUIRES 3.3V SUPPLY	30	260	7.2 mm	CMOS		5 V	Clock Generators	.65 mm	R-PDSO-G20	1	Not Qualified	27 MHz	e6
CDC421125RGETG4	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	312.5 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	35.42 MHz	e4
PLL1700EG	Texas Instruments	CLOCK GENERATOR, VIDEO	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	33.8688 MHz	3.3,5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.5 V	85 Cel	-25 Cel	TIN BISMUTH	DUAL	2 mm	5.3 mm	ALSO REQUIRES 3.3V SUPPLY	30	260	7.2 mm	CMOS		5 V	Clock Generators	.65 mm	R-PDSO-G20	1	Not Qualified	27 MHz	e6
CDC421A312RGET	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	312.5 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	31.25 MHz	e4
CDC706PW	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	54 MHz		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm	4.4 mm		30	260	6.5 mm	BICMOS	115 mA	3.3 V		.65 mm	R-PDSO-G20	1	Not Qualified	8 MHz	e4
LMK61E08-SIAT	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	INDUSTRIAL	NO LEAD	6	DMA	RECTANGULAR	UNSPECIFIED	YES	3.465 V	1000 MHz		MICROELECTRONIC ASSEMBLY	MODULE,6LEAD,164	3.135 V	85 Cel	-40 Cel	NICKEL GOLD	DUAL	1.15 mm	5 mm		30	260	7 mm	CMOS	208 mA	3.3 V		2.54 mm	R-XDMA-N6	3		50 MHz	e4
CDC950DGG	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	133 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3.135 V	85 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm	6.1 mm		30	260	12.5 mm	CMOS	200 mA	3.3 V	Clock Generators	.5 mm	R-PDSO-G48	2	Not Qualified	14.8 MHz	e4
CDC421156RGERG4	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	312.5 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	35.42 MHz	e4
CDC9161DL	Texas Instruments		COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			2.5,3.3	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		70 Cel	0 Cel		DUAL							CMOS			Clock Generators	.635 mm	R-PDSO-G48		Not Qualified
CDC421156RGER	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	156.25 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	31.25 MHz	e4
SN74LS362J-00	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	12 MHz		IN-LINE		4.75 V	70 Cel	0 Cel		DUAL	5.08 mm	7.62 mm	ALSO REQUIRES 12V SUPPLY			24.195 mm	TTL		5 V		2.54 mm	R-GDIP-T20		Not Qualified	48 MHz
PLL1700E	Texas Instruments	CLOCK GENERATOR, VIDEO	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	33.8688 MHz	3.3,5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.5 V	85 Cel	-25 Cel	NICKEL PALLADIUM GOLD	DUAL	2 mm	5.3 mm	ALSO REQUIRES 3.3V SUPPLY	30	260	7.2 mm	CMOS	25 mA	5 V	Clock Generators	.65 mm	R-PDSO-G20	1	Not Qualified	27 MHz	e4
SN74LS321J	Texas Instruments	CLOCK GENERATOR, OTHER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	20 MHz		IN-LINE		4.75 V	70 Cel	0 Cel		DUAL	5.08 mm	7.62 mm		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	BIPOLAR	75 mA	5 V		2.54 mm	R-GDIP-T16		Not Qualified	20 MHz
CDCDB2000NPPR	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	INDUSTRIAL	NO LEAD	80	HLGA	SQUARE	UNSPECIFIED	YES	3.465 V	250 MHz		GRID ARRAY, HEAT SINK/SLUG		3.135 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	BOTTOM	.9 mm	6 mm		30	260	6 mm	CMOS		3.3 V		.5 mm	S-XBGA-N80	3		250 MHz	e4
CDC421A100RGER	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	100 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	33.33 MHz	e4
SNCDC9481DWR	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	66 MHz		SMALL OUTLINE		3.135 V	70 Cel	0 Cel		DUAL	2.65 mm	7.5 mm				17.9 mm	CMOS		3.3 V		1.27 mm	R-PDSO-G28		Not Qualified	14.31818 MHz
TIM8224N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			5,12	IN-LINE	DIP16,.3		70 Cel	0 Cel		DUAL							BIPOLAR	115 mA		Clock Generators	2.54 mm	R-PDIP-T16		Not Qualified
CDC421100RGETG4	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	312.5 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	35.42 MHz	e4
PLL1707DBQG4	Texas Instruments	CLOCK GENERATOR, VIDEO	COMMERCIAL EXTENDED	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	36.864 MHz	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	2.7 V	85 Cel	-25 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm	3.9 mm		30	260	8.65 mm	CMOS	25 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G20	1	Not Qualified	27.27 MHz	e4
SNCDC9842DWR	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	66 MHz		SMALL OUTLINE		3.135 V	70 Cel	0 Cel		DUAL	2.65 mm	7.5 mm				17.9 mm	CMOS		3.3 V		1.27 mm	R-PDSO-G28		Not Qualified	14.31818 MHz
SN74LS424N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			5,12	IN-LINE	DIP16,.3		70 Cel	0 Cel		DUAL				NOT SPECIFIED	NOT SPECIFIED		CMOS	115 mA		Clock Generators	2.54 mm	R-PDIP-T16
CDC421A100RGET	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	100 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	33.33 MHz	e4
PLL1705DBQR	Texas Instruments	CLOCK GENERATOR, VIDEO	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	36.864 MHz	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	2.7 V	85 Cel	-25 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm	3.9 mm		30	260	8.65 mm	CMOS	25 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G20	1	Not Qualified	27 MHz	e4
PLL1700EG4	Texas Instruments	CLOCK GENERATOR, VIDEO	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	33.8688 MHz	3.3,5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.5 V	85 Cel	-25 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	2 mm	5.3 mm	ALSO REQUIRES 3.3V SUPPLY	NOT SPECIFIED	260	7.2 mm	CMOS	25 mA	5 V	Clock Generators	.65 mm	R-PDSO-G20	1	Not Qualified	27 MHz	e4
CDC421156RGER4G	Texas Instruments		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	PLASTIC/EPOXY	YES			3.3	CHIP CARRIER	LCC20,.16SQ,20		85 Cel	-40 Cel		QUAD								110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N20		Not Qualified
PLL1706DBQR	Texas Instruments	CLOCK GENERATOR, VIDEO	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	.096 MHz	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP20,.25	2.7 V	85 Cel	-25 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm	3.9 mm		30	260	8.65 mm	CMOS	25 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G20	1	Not Qualified	27 MHz	e4
TIM9904NL40	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			5,12	IN-LINE	DIP20,.3		70 Cel	0 Cel		DUAL							TTL	95 mA		Clock Generators	2.54 mm	R-PDIP-T20		Not Qualified
INS8224J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			5,12	IN-LINE	DIP16,.3		70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL							BIPOLAR	115 mA		Clock Generators	2.54 mm	R-XDIP-T16		Not Qualified		e0
CDC950DGGG4	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	OTHER	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	133 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3.135 V	85 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm	6.1 mm		30	260	12.5 mm	CMOS	200 mA	3.3 V	Clock Generators	.5 mm	R-PDSO-G48	2	Not Qualified	14.8 MHz	e4
CDC921DLR	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	OTHER	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	133 MHz	2.5/3.3	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	3.165 V	85 Cel	0 Cel		DUAL	2.79 mm	7.5 mm	ALSO REQUIRES 2.5V SUPPLY	NOT SPECIFIED	NOT SPECIFIED	15.875 mm	CMOS	156 mA	3.3 V	Clock Generators	.635 mm	R-PDSO-G48		Not Qualified	14.318 MHz
TIM9904NL	Texas Instruments	CLOCK GENERATOR, OTHER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				IN-LINE	DIP20,.3		70 Cel	0 Cel		DUAL				NOT SPECIFIED	NOT SPECIFIED		CMOS	85 mA		Clock Generators	2.54 mm	R-PDIP-T20		Not Qualified
SN74LS424J-00	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	27 MHz		IN-LINE		4.75 V	70 Cel	0 Cel		DUAL	5.08 mm	7.62 mm	ALSO REQUIRES 12V SUPPLY			19.56 mm	TTL		5 V		2.54 mm	R-GDIP-T16		Not Qualified	27 MHz
CDCD5704PWR	Texas Instruments	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.625 V	667 MHz	2.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	2.375 V	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm	4.4 mm		30	260	6.5 mm	CMOS	115 mA	2.5 V	Clock Generators	.65 mm	R-PDSO-G28	1	Not Qualified	133 MHz	e4
PLL1700EG/2K	Texas Instruments	CLOCK GENERATOR, VIDEO	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	33.8688 MHz	3.3,5	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	4.5 V	85 Cel	-25 Cel	TIN BISMUTH	DUAL	2 mm	5.3 mm	ALSO REQUIRES 3.3V SUPPLY	30	260	7.2 mm	CMOS		5 V	Clock Generators	.65 mm	R-PDSO-G20	1	Not Qualified	27 MHz	e6
CDC906PWR	Texas Instruments	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	54 MHz	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.2 mm	4.4 mm		30	260	6.5 mm	CMOS	115 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G20	1	Not Qualified	54 MHz	e4
CDC9171DBLE	Texas Instruments	CLOCK GENERATOR, OTHER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	33.868 MHz	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	3 V	70 Cel	0 Cel		DUAL	2 mm	5.3 mm		NOT SPECIFIED	NOT SPECIFIED	8.2 mm	CMOS	35 mA	3.3 V	Clock Generators	.65 mm	R-PDSO-G24		Not Qualified	18.432 MHz
CDC9843DW	Texas Instruments	CLOCK GENERATOR, PROCESSOR SPECIFIC	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	66 MHz	3.3	SMALL OUTLINE	SOP28,.4	3.135 V	70 Cel	0 Cel		DUAL	2.65 mm	7.5 mm		NOT SPECIFIED	NOT SPECIFIED	17.9 mm	CMOS	50 mA	3.3 V	Clock Generators	1.27 mm	R-PDSO-G28		Not Qualified	14.318 MHz
CDC421100RGET	Texas Instruments	CLOCK GENERATOR, OTHER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	100 MHz	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	1 mm	4 mm		30	260	4 mm	CMOS	110 mA	3.3 V	Clock Generators	.5 mm	S-PQCC-N24	2	Not Qualified	33.3333 MHz	e4

Clock Generators

A clock generator is an electronic circuit that generates an electrical signal that serves as a timing reference for other circuits in a system. Clock generators are used in many electronic devices, such as computers, cell phones, and digital cameras. The clock signal is used to synchronize the operation of different components in the system, such as microprocessors, memory devices, and input/output interfaces.

Clock generators can be classified based on their output frequency and stability. Some clock generators produce a fixed frequency output, while others have a programmable output frequency. The stability of the clock signal is also an important parameter, and clock generators can be designed to produce a stable frequency output over a wide range of temperature and voltage conditions.

Clock generators can also include additional features such as frequency multiplication, frequency division, and phase locking. Frequency multiplication allows the output frequency to be multiplied by an integer value, while frequency division allows the output frequency to be divided by an integer value. Phase locking is used to ensure that the output frequency of the clock generator is synchronized with an external reference signal.