RECTANGULAR Digital Signal Processors (DSPs) 711

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Integrated Cache	Surface Mount	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	Address Bus Width	DAC Channels	Bit Size	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	CPU Family	No. of External Interrupts	Minimum Operating Temperature	Terminal Finish	ADC Channels	Terminal Position	DMA Channels	Digital To Analog Convertors	Maximum Seated Height	ROM Words	RAM Words	Width	Data EEPROM Size	Additional Features	Boundary Scan	Peripherals	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Internal Bus Architecture	Length	No. of Timers	RAM Bytes	Technology	Analog To Digital Convertors	Maximum Supply Current	Nominal Supply Voltage	No. of DMA Channels	PWM Channels	No. of Serial I/Os	Sub-Category	Connectivity	ROM Programmability	Terminal Pitch	Format	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Speed	Low Power Mode	Barrel Shifter	JESD-609 Code	On Chip Program ROM Width	No. of I/O Lines
DSPIC33EP128MC202-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel		3	-40 Cel	MATTE TIN		DUAL			2.65 mm		16384	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33EV128GM102-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	TS 16949	0	NO	16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	4.5 V	85 Cel		3	-40 Cel		YES	DUAL	YES		2 mm		8192	5.3 mm			NO		0	40 MHz			MULTIPLE	10.2 mm	7		CMOS		350 mA	5 V	4	YES				FLASH	.65 mm	FIXED POINT	R-PDSO-G28			40 rpm	YES	YES		8	21
SAA7706H/N210S,557	NXP Semiconductors	DIGITAL SIGNAL PROCESSOR, OTHER	INDUSTRIAL	GULL WING	80	QFP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0				FLATPACK		3 V	85 Cel			-40 Cel			QUAD			3.2 mm			14 mm			NO		0	.4 MHz			MULTIPLE	20 mm			CMOS			3.3 V							.8 mm	FIXED POINT	R-PQFP-G80				NO	NO
DSPIC33CK32MC102T-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, OTHER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	AEC-Q100	0		16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel		4	-40 Cel			DUAL			2 mm		8192	5.3 mm			YES		0	64 MHz			MULTIPLE	10.2 mm	3		CMOS		29.6 mA	3.3 V	4		3			FLASH	.65 mm	FIXED POINT	R-PDSO-G28				YES	YES		24
DSPIC33FJ12MC201-I/P	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	3.6 V			0		16	3.3	IN-LINE	DIP20,.3	3 V	85 Cel			-40 Cel	MATTE TIN		DUAL			5.334 mm			7.62 mm					0	40 MHz				26.162 mm			CMOS		90 mA	3.3 V				Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T20		Not Qualified				e3	24
DSPIC33EV128GM002-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	TS 16949	0	NO	16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	4.5 V	85 Cel		3	-40 Cel		YES	DUAL	YES		2 mm		8192	5.3 mm			NO		0	40 MHz			MULTIPLE	10.2 mm	7		CMOS		350 mA	5 V	4	YES				FLASH	.65 mm	FIXED POINT	R-PDSO-G28			40 rpm	YES	YES		8	21
DSPIC30F2010-30I/SPG	Microchip Technology	DIGITAL SIGNAL PROCESSOR, OTHER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	5.5 V	8	TS 16949	0	NO	16	3/5	IN-LINE	DIP28,.3	2.5 V	85 Cel		3	-40 Cel	MATTE TIN	YES	DUAL	NO		5.08 mm	4096	512	7.62 mm	1K		NO	BOD, POR, PWM(8), QEI, TIMER(3), WDT	0	40 MHz			MULTIPLE	34.671 mm	3	512	CMOS	6-Ch 10-Bit	300 mA	3 V		YES		Digital Signal Processors	I2C, SPI, UART	FLASH	2.54 mm	FLOATING POINT	R-PDIP-T28		Not Qualified	30 rpm	YES	YES	e3	24	20
TAS3108DCPR	Texas Instruments	DIGITAL SIGNAL PROCESSOR, OTHER	COMMERCIAL	GULL WING	38	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V			0				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		3 V	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL			1.2 mm		3072	4.4 mm			NO		0	20 MHz	30	260	MULTIPLE	9.7 mm	0		CMOS			3.3 V	0						.5 mm	FIXED POINT	R-PDSO-G38	3	Not Qualified		YES	NO	e4
TAS3108DCPRG4	Texas Instruments	DIGITAL SIGNAL PROCESSOR, OTHER	COMMERCIAL	GULL WING	38	HTSSOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		3 V	70 Cel			0 Cel	NICKEL PALLADIUM GOLD		DUAL			1.2 mm			4.4 mm			NO		0	20 MHz	30	260	MULTIPLE	9.7 mm			CMOS			3.3 V							.5 mm	FIXED POINT	R-PDSO-G38	3	Not Qualified		YES	NO	e4
DSPIC33CK128MP502-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8				16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel		4	-40 Cel	Matte Tin (Sn)		DUAL			2 mm		16384	5.3 mm			YES			64 MHz			MULTIPLE	10.2 mm	2		CMOS		35 mA	3.3 V	4		4			FLASH	.65 mm	FIXED POINT	R-PDSO-G28				YES	YES	e3	24
DSPIC33CK32MC102-H/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	YES	3.6 V	8	AEC-Q100	0		16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	150 Cel		4	-40 Cel			DUAL			2 mm		8192	5.3 mm			YES		0	64 MHz			MULTIPLE	10.2 mm	3		CMOS		29.6 mA	3.3 V	4		3			FLASH	.65 mm	FIXED POINT	R-PDSO-G28				YES	YES		24
DSPIC33EV32GM002-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	TS 16949	0	NO	16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	4.5 V	85 Cel		3	-40 Cel		YES	DUAL	YES		2 mm		4096	5.3 mm			NO		0	40 MHz			MULTIPLE	10.2 mm	7		CMOS		350 mA	5 V	4	YES				FLASH	.65 mm	FIXED POINT	R-PDSO-G28			40 rpm	YES	YES		8	21
DSPIC30F2010-30I/SOVAO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, OTHER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	AEC-Q100; TS 16949	0	NO	16		SMALL OUTLINE	SOP28,.4	2.5 V	85 Cel		3	-40 Cel	MATTE TIN	YES	DUAL	NO		2.65 mm		512	7.5 mm			NO		0	40 MHz			MULTIPLE	17.9 mm	5		CMOS		150 mA	3 V		YES	2			FLASH	1.27 mm	FIXED POINT	R-PDSO-G28			30 rpm	YES	YES	e3	24	20
DSPIC30F4012-20E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	5.5 V			0		16	3/5	SMALL OUTLINE	SOP28,.4	4.5 V	125 Cel			-40 Cel	Matte Tin (Sn)		DUAL			2.65 mm			7.5 mm		ALSO OPERATES AT 3V MINIMUM SUPPLY AT 15 MHZ			0	40 MHz	40	250		17.9 mm			CMOS			5 V				Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified				e3	24
DSPIC33EP256GP502-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel		3	-40 Cel	MATTE TIN		DUAL			2.65 mm		32768	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC30F4012-20I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	5.5 V			0		16	3/5	IN-LINE	DIP28,.6	4.5 V	85 Cel			-40 Cel	MATTE TIN		DUAL			4.572 mm			15.24 mm		ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 7.5 MHZ			0	40 MHz				34.671 mm			CMOS			5 V				Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified				e3	24
DSPIC30F4011-20E/P	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	5.5 V			0		16	3/5	IN-LINE	DIP40,.6	4.5 V	125 Cel			-40 Cel	MATTE TIN		DUAL			4.83 mm			15.24 mm		ALSO OPERATES AT 3V MINIMUM SUPPLY AT 15 MHZ			0	40 MHz				52.26 mm			CMOS			5 V				Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T40		Not Qualified				e3	24
DSPIC33EP16GS202T-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V		TS 16949	0		16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel			-40 Cel	MATTE TIN		DUAL			2 mm			5.3 mm		OPERATES UPTO 60MIPS; AEC-Q100 (PLANNED)			0	60 MHz	40	260		10.2 mm			CMOS			3.3 V						FLASH	.65 mm		R-PDSO-G28	2					e3	8
DSPIC33EP256GP502-I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	3.6 V	8	TS 16949	0		16	3.3	IN-LINE	DIP28,.3	3 V	85 Cel		3	-40 Cel	MATTE TIN		DUAL			5.08 mm		32768	7.62 mm			YES		0	60 MHz				34.671 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified		YES		e3	8
DSPIC33EV128GM102-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	AEC-Q100; TS 16949	0	NO	16	5	SMALL OUTLINE	SOP28,.4	4.5 V	125 Cel		3	-40 Cel	MATTE TIN	YES	DUAL	YES		2.65 mm	131072	8192	7.5 mm	0		NO	BOR, COMPARATOR(4), DMA(4), POR, PWM(6), TIMER(7), WDT	0	40 MHz			MULTIPLE	17.9 mm	7	8192	CMOS	11-Ch 12-Bit	350 mA	5 V	4	YES		Digital Signal Processors	CAN, I2C, IRDA, LIN, SENT(2), SMBUS, SPI(2), UART(2)	FLASH	1.27 mm	FIXED POINT	R-PDSO-G28		Not Qualified	40 rpm	YES	YES	e3	8	21
DSPIC33EV64GM102-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	TS 16949	0	NO	16	5	SMALL OUTLINE	SOP28,.4	4.5 V	85 Cel		3	-40 Cel	MATTE TIN	YES	DUAL	YES		2.65 mm	65536	8192	7.5 mm	0		NO	BOR, COMPARATOR(4), DMA(4), POR, PWM(6), TIMER(7), WDT	0	40 MHz			MULTIPLE	17.9 mm	7	8192	CMOS	11-Ch 12-Bit	350 mA	5 V	4	YES		Digital Signal Processors	CAN, I2C, IRDA, LIN, SENT(2), SMBUS, SPI(2), UART(2)	FLASH	1.27 mm	FIXED POINT	R-PDSO-G28		Not Qualified	40 rpm	YES	YES	e3	8	21
DSPIC30F4012-20E/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	5.5 V			0		16	3/5	IN-LINE	DIP28,.6	4.5 V	125 Cel			-40 Cel	MATTE TIN		DUAL			4.572 mm			15.24 mm		ALSO OPERATES AT 3V MINIMUM SUPPLY AT 15 MHZ			0	40 MHz				34.671 mm			CMOS			5 V				Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified				e3	24
DSPIC30F4013-20E/P	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	5.5 V			0		16	3/5	IN-LINE	DIP40,.6	4.5 V	125 Cel			-40 Cel	MATTE TIN		DUAL			4.83 mm			15.24 mm		ALSO OPERATES AT 3V MINIMUM SUPPLY AT 10 MHZ			0	40 MHz				52.26 mm			CMOS			5 V				Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T40		Not Qualified				e3	24
DSPIC33EP128MC502-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel		3	-40 Cel	MATTE TIN		DUAL			2 mm		16384	5.3 mm			YES		0	60 MHz	40	260		10.2 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	.65 mm	FIXED POINT	R-PDSO-G28	2	Not Qualified		YES		e3	8
DSPIC33EV256GM002-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	TS 16949	0	NO	16	5	SMALL OUTLINE	SOP28,.4	4.5 V	85 Cel		3	-40 Cel	MATTE TIN	YES	DUAL	YES		2.65 mm	262144	16384	7.5 mm	0		NO	BOR, COMPARATOR(4), DMA(4), POR, PWM(6), TIMER(7), WDT	0	40 MHz			MULTIPLE	17.9 mm	7	16384	CMOS	11-Ch 12-Bit	350 mA	5 V	4	YES		Digital Signal Processors	I2C, IRDA, LIN, SENT(2), SMBUS, SPI(2), UART(2)	FLASH	1.27 mm	FIXED POINT	R-PDSO-G28		Not Qualified	40 rpm	YES	YES	e3	8	21
DSPIC33CK256MP202-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	AEC-Q100			16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel		4	-40 Cel	Matte Tin (Sn)		DUAL			2 mm		24576	5.3 mm			YES			64 MHz			MULTIPLE	10.2 mm	2		CMOS		42.5 mA	3.3 V	4		4			FLASH	.65 mm	FIXED POINT	R-PDSO-G28				YES	YES	e3	24
DSPIC33EP32MC202-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel		3	-40 Cel	MATTE TIN		DUAL			2.65 mm		4096	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC30F4013-30I/P	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	5.5 V			0		16	3/5	IN-LINE	DIP40,.6	4.5 V	85 Cel			-40 Cel	MATTE TIN		DUAL			4.83 mm			15.24 mm		ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10 MHZ			0	40 MHz				52.26 mm			CMOS			5 V				Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T40		Not Qualified				e3	24
DSPIC33EP128GS702-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, OTHER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0	YES	16		SMALL OUTLINE	SOP28,.4	3 V	85 Cel		4	-40 Cel	MATTE TIN	YES	DUAL	YES	1-Ch 12-Bit	2.65 mm	131072	8192	7.5 mm	0		YES	COMPARATOR(4), DMA(4), PWM(16), TIMER(5), WDT	0	60 MHz			MULTIPLE	17.9 mm	7	8192	CMOS	11-Ch 12-Bit	75 mA	3.3 V	0	YES	4		CAN(2), I2C(2), SPI(3), UART(2)	FLASH	1.27 mm	FIXED POINT	R-PDSO-G28				YES	YES	e3	24	20
DSPIC33EV64GM002-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	TS 16949	0	NO	16	5	SMALL OUTLINE	SOP28,.4	4.5 V	85 Cel		3	-40 Cel	MATTE TIN	YES	DUAL	YES		2.65 mm	65536	8192	7.5 mm	0		NO	BOR, COMPARATOR(4), DMA(4), POR, PWM(6), TIMER(7), WDT	0	40 MHz			MULTIPLE	17.9 mm	7	8192	CMOS	11-Ch 12-Bit	350 mA	5 V	4	YES		Digital Signal Processors	I2C, IRDA, LIN, SENT(2), SMBUS, SPI(2), UART(2)	FLASH	1.27 mm	FIXED POINT	R-PDSO-G28		Not Qualified	40 rpm	YES	YES	e3	8	21
DSPIC30F4013-20I/P	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	5.5 V			0		16	3/5	IN-LINE	DIP40,.6	4.5 V	85 Cel			-40 Cel	MATTE TIN		DUAL			4.83 mm			15.24 mm		OPERATES AT 2.5 V MINIMUM SUPPLY @ 7.5 MHZ			0	40 MHz				52.26 mm			CMOS			5 V				Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T40		Not Qualified				e3	24
DSPIC33CK128MP202-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8				16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel		4	-40 Cel	Matte Tin (Sn)		DUAL			2 mm		16384	5.3 mm			YES			64 MHz			MULTIPLE	10.2 mm	2		CMOS		35 mA	3.3 V	4		4			FLASH	.65 mm	FIXED POINT	R-PDSO-G28				YES	YES	e3	24
DSPIC33FJ16GS502-I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	3.6 V			0		16	3.3	IN-LINE	DIP28,.3	3 V	85 Cel			-40 Cel	MATTE TIN		DUAL			5.08 mm			7.62 mm					0	50 MHz				34.671 mm			CMOS		160 mA	3.3 V				Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified				e3
DSPIC30F4012T-30I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	5.5 V			0		16	3/5	SMALL OUTLINE	SOP28,.4	4.5 V	85 Cel			-40 Cel	Matte Tin (Sn)		DUAL			2.65 mm			7.5 mm		ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10 MHZ			0	40 MHz				17.9 mm			CMOS			5 V				Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified				e3	24
DSPIC33EP128GP502-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	TS 16949	0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel		3	-40 Cel	MATTE TIN		DUAL			2.65 mm		16384	7.5 mm			YES		0	60 MHz	40	250		17.9 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified		YES		e3	8
DSPIC33FJ32GP202-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel			-40 Cel	MATTE TIN		DUAL			2.65 mm			7.5 mm					0	40 MHz	40	250		17.9 mm			CMOS		80 mA	3.3 V				Microcontrollers		FLASH	1.27 mm		R-PDSO-G28	1	Not Qualified				e3
ADSP-2181BSTZ-133	Analog Devices	DIGITAL SIGNAL PROCESSOR, OTHER	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	16		14		16	5	FLATPACK, LOW PROFILE, FINE PITCH	QFP128,.63X.87,20	4.5 V	85 Cel		4	-40 Cel	Matte Tin (Sn)		QUAD			1.6 mm		8192	14 mm		33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION	NO		24	16.67 MHz	40	260	MULTIPLE	20 mm	1		CMOS		100 mA	5 V	2		2	Digital Signal Processors			.5 mm	FIXED POINT	R-PQFP-G128	3	Not Qualified		YES	YES	e3
DSPIC33EV256GM102-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	TS 16949	0	NO	16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	4.5 V	85 Cel		3	-40 Cel		YES	DUAL	YES		2 mm		16384	5.3 mm			NO		0	40 MHz			MULTIPLE	10.2 mm	7		CMOS		350 mA	5 V	4	YES				FLASH	.65 mm	FIXED POINT	R-PDSO-G28			40 rpm	YES	YES		8	21
DSPIC33FJ16GS402-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	85 Cel			-40 Cel	MATTE TIN		DUAL			2.65 mm			7.5 mm					0	50 MHz	40	260		17.9 mm			CMOS		160 mA	3.3 V				Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G28	1	Not Qualified				e3
MC56F8365VFGE	NXP Semiconductors	DIGITAL SIGNAL PROCESSOR, OTHER	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY		YES	2.75 V			11		16	2.5,3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP128,.63X.87,20	2.25 V	105 Cel	56800E		-40 Cel	TIN		QUAD			1.6 mm	524288		14 mm		ALSO REQUIRES 3.3V SUPPLY	YES		4	120 MHz	40	260	MULTIPLE	20 mm		36864	CMOS			2.5 V				Microcontrollers		FLASH	.5 mm	FIXED POINT	R-PQFP-G128	3	Not Qualified	60 rpm	YES	YES	e3
DSPIC33EV64GM002-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	5.5 V	8	AEC-Q100; TS 16949	0	NO	16	5	SMALL OUTLINE	SOP28,.4	4.5 V	125 Cel		3	-40 Cel	MATTE TIN	YES	DUAL	YES		2.65 mm	65536	8192	7.5 mm	0		NO	BOR, COMPARATOR(4), DMA(4), POR, PWM(6), TIMER(7), WDT	0	40 MHz			MULTIPLE	17.9 mm	7	8192	CMOS	11-Ch 12-Bit	350 mA	5 V	4	YES		Digital Signal Processors	I2C, IRDA, LIN, SENT(2), SMBUS, SPI(2), UART(2)	FLASH	1.27 mm	FIXED POINT	R-PDSO-G28		Not Qualified	40 rpm	YES	YES	e3	8	21
DSPIC33CK128MP202-E/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8	AEC-Q100			16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel		4	-40 Cel	Matte Tin (Sn)		DUAL			2 mm		16384	5.3 mm			YES			64 MHz			MULTIPLE	10.2 mm	2		CMOS		42.5 mA	3.3 V	4		4			FLASH	.65 mm	FIXED POINT	R-PDSO-G28				YES	YES	e3	24
DSPIC33EP512MC502-I/SP	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	NO	3.6 V	8	TS 16949	0		16	3.3	IN-LINE	DIP28,.3	3 V	85 Cel		3	-40 Cel	MATTE TIN		DUAL			5.08 mm		49152	7.62 mm			YES		0	60 MHz				34.67 mm	5		CMOS		55 mA	3.3 V	4			Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T28		Not Qualified		YES		e3	8
DSPIC33FJ12MC201-I/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0		16	3.3	SMALL OUTLINE	SOP20,.4	3 V	85 Cel			-40 Cel	MATTE TIN		DUAL			2.65 mm			7.5 mm					0	40 MHz	40	260		12.8 mm			CMOS		90 mA	3.3 V				Digital Signal Processors		FLASH	1.27 mm	FIXED POINT	R-PDSO-G20	1	Not Qualified				e3	24
DSPIC33EP16GS202T-E/SSVAO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V		AEC-Q100; TS 16949	0		16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	125 Cel			-40 Cel	MATTE TIN		DUAL			2 mm			5.3 mm		OPERATES UPTO 60MIPS; AEC-Q100 (PLANNED)			0	60 MHz				10.2 mm			CMOS			3.3 V						FLASH	.65 mm		R-PDSO-G28						e3	8
DSPIC30F3014-30I/P	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY		NO	5.5 V			0		16	3/5	IN-LINE	DIP40,.6	4.5 V	85 Cel			-40 Cel	MATTE TIN		DUAL			4.83 mm			15.24 mm		ALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10 MHZ			0	40 MHz				52.26 mm			CMOS			5 V				Digital Signal Processors		FLASH	2.54 mm	FIXED POINT	R-PDIP-T40		Not Qualified				e3	24
DSPIC33CK256MP502T-I/SS	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	NO	YES	3.6 V	8				16		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	85 Cel		4	-40 Cel			DUAL			2 mm		24576	5.3 mm			YES			64 MHz			MULTIPLE	10.2 mm	2		CMOS		35 mA	3.3 V	4		4			FLASH	.65 mm	FIXED POINT	R-PDSO-G28				YES	YES		24
DSPIC33EP128GP502-E/SO	Microchip Technology	DIGITAL SIGNAL PROCESSOR, CONTROLLER	AUTOMOTIVE	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY		YES	3.6 V			0		16	3.3	SMALL OUTLINE	SOP28,.4	3 V	125 Cel			-40 Cel	MATTE TIN		DUAL			2.65 mm			7.5 mm					0	60 MHz	40	260		17.9 mm			CMOS		150 mA	3.3 V				Digital Signal Processors		FLASH	1.27 mm	FLOATING POINT	R-PDSO-G28	1	Not Qualified				e3	24

Digital Signal Processors (DSPs)

Digital Signal Processors (DSPs) are specialized microprocessors that are designed to perform mathematical operations on digital signals. They are used in a variety of applications that require real-time signal processing, such as audio and video processing, telecommunications, and image processing. DSPs are capable of performing complex mathematical operations, such as filtering, convolution, and correlation, on digital signals at high speeds, making them an essential component of modern signal processing systems.

DSPs are optimized for digital signal processing tasks and are designed to handle large amounts of data at high speeds. They typically have a specialized architecture that includes dedicated hardware for performing mathematical operations on digital signals, as well as specialized memory and I/O interfaces that are optimized for signal processing applications.

DSPs are used in a wide range of applications, including audio and video compression, speech recognition, image and video processing, and radar and sonar systems. They are also used in telecommunications systems, such as cell phones and modems, to process signals in real time. DSPs are also used in scientific and engineering applications, such as biomedical research and industrial automation.