SDIP Display Controllers 54

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Address Bus Width	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Position	Display Config	Maximum Seated Height	Width	External Data Bus Width	Maximum Clock Frequency	Length	Technology	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Qualification
M35061-XXXSP	Renesas Electronics	DISPLAY CONTROLLER, CRT CHARACTER DISPLAY	OTHER	THROUGH-HOLE	32	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8		IN-LINE, SHRINK PITCH		4.75 V	70 Cel	-20 Cel	DUAL	40 X 17 CHARACTERS	5.08 mm	10.16 mm	8	4.434 MHz	28 mm	CMOS	5 V		1.778 mm	R-PDIP-T32	Not Qualified
M35047-XXXSP	Renesas Electronics	DISPLAY CONTROLLER, CRT CHARACTER DISPLAY	OTHER	THROUGH-HOLE	20	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V			IN-LINE, SHRINK PITCH		4.75 V	85 Cel	-20 Cel	DUAL	24 X 12 CHARACTERS	4.5 mm	7.62 mm		100 MHz	19 mm	CMOS	5 V		1.778 mm	R-PDIP-T20	Not Qualified
M35053-XXXSP	Renesas Electronics	DISPLAY CONTROLLER, CRT CHARACTER DISPLAY	OTHER	THROUGH-HOLE	20	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V			IN-LINE, SHRINK PITCH		4.75 V	70 Cel	-20 Cel	DUAL	24 X 10 CHARACTERS	4.5 mm	7.62 mm		4.434 MHz	19 mm	CMOS	5 V		1.778 mm	R-PDIP-T20	Not Qualified
M35060-XXXSP	Renesas Electronics	DISPLAY CONTROLLER, CRT CHARACTER DISPLAY	OTHER	THROUGH-HOLE	32	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8		IN-LINE, SHRINK PITCH		4.75 V	70 Cel	-20 Cel	DUAL	40 X 17 CHARACTERS	5.08 mm	10.16 mm	8	4.434 MHz	28 mm	CMOS	5 V		1.778 mm	R-PDIP-T32	Not Qualified
UPD6465CS-XXX	Renesas Electronics	GRAPHICS PROCESSOR	COMMERCIAL	THROUGH-HOLE	24	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO			5	IN-LINE, SHRINK PITCH	SDIP24,.3		70 Cel	-20 Cel	DUAL							CMOS	5 V	Display Controllers	1.78 mm	R-PDIP-T24	Not Qualified
M35052-XXXSP	Renesas Electronics	DISPLAY CONTROLLER, CRT CHARACTER DISPLAY	OTHER	THROUGH-HOLE	20	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V			IN-LINE, SHRINK PITCH		4.75 V	70 Cel	-20 Cel	DUAL	24 X 10 CHARACTERS	4.5 mm	7.62 mm		4.434 MHz	19 mm	CMOS	5 V		1.778 mm	R-PDIP-T20	Not Qualified

Display Controllers

Display controllers are electronic circuits or chips that are used to drive displays, such as LCDs, LEDs, and OLEDs. They are responsible for controlling the pixels or segments on the display to produce the desired output. Display controllers are commonly used in a variety of applications, including televisions, computers, smartphones, and other electronic devices.

Display controllers can be either integrated into the main processing chip or designed as a separate component. They typically include a microcontroller, memory, and a display driver that converts the digital signals into the analog signals required by the display. Display controllers also include features such as gamma correction, brightness and contrast control, and color calibration to ensure accurate and consistent display output.

There are many different types of display controllers available, each designed for a specific type of display technology. For example, LCD display controllers use a different type of driver circuit than OLED display controllers. The choice of display controller depends on the specific requirements of the display and the application.