Onsemi Display Controllers 58

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Address Bus Width	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Position	Display Config	Maximum Seated Height	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Qualification
LC75810E	Onsemi	DISPLAY CONTROLLER, DOT MATRIX LCD DRIVER	INDUSTRIAL	GULL WING	100	QFP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	0		FLATPACK		2.7 V	85 Cel	-40 Cel	QUAD	10 X 80 DOTS	3 mm	14 mm		0	.6 MHz	20 mm	CMOS		5 V		.65 mm	R-PQFP-G100
LC74763	Onsemi	GRAPHICS PROCESSOR	OTHER	THROUGH-HOLE	30	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO			5	IN-LINE, SHRINK PITCH	SDIP30,.4		70 Cel	-30 Cel	DUAL								CMOS		5 V	Display Controllers	1.78 mm	R-PDIP-T30	Not Qualified
LC7471	Onsemi	GRAPHICS PROCESSOR	OTHER	THROUGH-HOLE	22	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO			5	IN-LINE, SHRINK PITCH	SDIP22,.3		70 Cel	-30 Cel	DUAL								CMOS		5 V	Display Controllers	1.78 mm	R-PDIP-T22	Not Qualified
LC74781M	Onsemi	GRAPHICS PROCESSOR	OTHER	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			5	SMALL OUTLINE	SOP24,.4		70 Cel	-30 Cel	DUAL								CMOS		5 V	Display Controllers	1.27 mm	R-PDSO-G24	Not Qualified
LC74782	Onsemi	GRAPHICS PROCESSOR	OTHER	THROUGH-HOLE	24	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO			5	IN-LINE, SHRINK PITCH	SDIP24,.3		70 Cel	-30 Cel	DUAL								CMOS		5 V	Display Controllers	1.78 mm	R-PDIP-T24	Not Qualified
LC74772V	Onsemi	GRAPHICS PROCESSOR	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			5	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		85 Cel	-40 Cel	DUAL								CMOS		5 V	Display Controllers	.635 mm	R-PDSO-G24	Not Qualified
LC74735YWS-8A43-H	Onsemi	GRAPHICS PROCESSOR	OTHER	GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES			3.3	FLATPACK	QFP80,.55SQ,20		70 Cel	-30 Cel	QUAD								CMOS		3.3 V	Display Controllers	.5 mm	S-PQFP-G80	Not Qualified
LC74735W	Onsemi	GRAPHICS PROCESSOR	OTHER	GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES			3.3	FLATPACK	QFP80,.55SQ,20		85 Cel	-30 Cel	QUAD								CMOS		3.3 V	Display Controllers	.5 mm	S-PQFP-G80	Not Qualified
LC74789	Onsemi	GRAPHICS PROCESSOR	OTHER	THROUGH-HOLE	24	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO			5	IN-LINE, SHRINK PITCH	SDIP24,.3		70 Cel	-30 Cel	DUAL								CMOS		5 V	Display Controllers	1.78 mm	R-PDIP-T24	Not Qualified
LC74735YW	Onsemi	DISPLAY CONTROLLER, CRT CHARACTER OR GRAPHICS DISPLAY	OTHER	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	18		FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20	3 V	70 Cel	-30 Cel	QUAD	24 x 32 DOT CHARACTER	1.6 mm	12 mm	12 X 16 DOT GRAPHICS ALSO AVAILABLE	12	40 MHz	12 mm	CMOS	37 mA	3.3 V		.5 mm	S-PQFP-G80

Display Controllers

Display controllers are electronic circuits or chips that are used to drive displays, such as LCDs, LEDs, and OLEDs. They are responsible for controlling the pixels or segments on the display to produce the desired output. Display controllers are commonly used in a variety of applications, including televisions, computers, smartphones, and other electronic devices.

Display controllers can be either integrated into the main processing chip or designed as a separate component. They typically include a microcontroller, memory, and a display driver that converts the digital signals into the analog signals required by the display. Display controllers also include features such as gamma correction, brightness and contrast control, and color calibration to ensure accurate and consistent display output.

There are many different types of display controllers available, each designed for a specific type of display technology. For example, LCD display controllers use a different type of driver circuit than OLED display controllers. The choice of display controller depends on the specific requirements of the display and the application.