Intersil DSP Peripherals 5

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	Output Data Bus Width	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	Additional Features	Boundary Scan	External Data Bus Width	Maximum Clock Frequency	Length	Technology	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Low Power Mode	JESD-609 Code
HSP48908JC-32	Intersil	DSP PERIPHERAL, CONVOLVER	COMMERCIAL	J BEND	84	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	20	5	CHIP CARRIER	LDCC84,1.2SQ	4.75 V	70 Cel	0 Cel	TIN LEAD	QUAD	4.57 mm	29.31 mm	10 BIT COEFFICIENT INPUT BUS	NO	8	32 MHz	29.31 mm	CMOS	5 V	DSP Peripherals	1.27 mm	S-PQCC-J84		Not Qualified	YES	e0
HSP45102SI-33	Intersil	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	12	5	SMALL OUTLINE	SOP28,.4	4.75 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2.65 mm	7.5 mm	OFFSET BINARY OUTPUT	NO	0	33 MHz	17.9 mm	CMOS	5 V	DSP Peripherals	1.27 mm	R-PDSO-G28	1	Not Qualified	YES	e0
HSP45102SI-40	Intersil	DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			5	SMALL OUTLINE	SOP28,.4		85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL								CMOS	5 V	DSP Peripherals	1.27 mm	R-PDSO-G28		Not Qualified		e0
HSP48410JC-33	Intersil	DSP PERIPHERAL, HISTOGRAM PROCESSOR	COMMERCIAL	J BEND	84	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	24		CHIP CARRIER		4.75 V	70 Cel	0 Cel	TIN LEAD	QUAD	4.57 mm	29.31 mm		NO	24	33 MHz	29.31 mm	CMOS	5 V		1.27 mm	S-PQCC-J84	4	Not Qualified	YES	e0
CDP1855E	Intersil	DSP PERIPHERAL, MULTIPLIER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	10.5 V	8	5/10	IN-LINE	DIP28,.6	4 V	85 Cel	-40 Cel	TIN LEAD	DUAL	6.35 mm	15.24 mm		NO	8		37.4 mm	CMOS	10 V	DSP Peripherals	2.54 mm	R-PDIP-T28		Not Qualified	NO	e0

DSP Peripherals

DSP (Digital Signal Processing) peripherals are electronic circuits that are designed to be used with DSP processors to perform specific tasks related to signal processing. DSP processors are used in a variety of applications, including audio and video processing, telecommunications, and image processing. DSP peripherals are designed to enhance the functionality of DSP processors by providing additional capabilities such as data acquisition, signal conditioning, and data conversion.

DSP peripherals can include analog-to-digital converters (ADCs), digital-to-analog converters (DACs), amplifiers, filters, and other signal conditioning circuits. These peripherals are used to acquire and condition signals before they are processed by the DSP processor. ADCs are used to convert analog signals, such as audio or video signals, into digital signals that can be processed by the DSP processor. DACs are used to convert digital signals back into analog signals, such as audio or video signals, for output.

DSP peripherals can also include hardware accelerators, which are used to offload computationally intensive tasks from the DSP processor. These hardware accelerators can include digital signal processors, graphics processing units, and other specialized hardware. By offloading these tasks, the DSP processor can focus on other tasks, resulting in improved performance and efficiency.