18 Serial Communication Controllers 23

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	Address Bus Width	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage	Maximum Operating Temperature	Maximum Data Transfer Rate	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	RAM Words	Width	Additional Features	Boundary Scan	Data Encoding or Decoding Method	Communication Protocol	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Technology	Maximum Supply Current	Nominal Supply Voltage	No. of Serial I/Os	Bus Compatibility	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Low Power Mode	JESD-609 Code	No. of I/O Lines
MCP2515-I/SO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, CAN	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8		0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	14	7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz	40	260	11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18	1		YES	e3	0
MCP2515-E/SO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, CAN	AUTOMOTIVE	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8		0	SMALL OUTLINE	SOP18,.4	4.5 V	125 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm	14	7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18	1		YES	e3	0
MCP2515-I/P	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, CAN	INDUSTRIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	8		0	IN-LINE	DIP18,.3	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	5.334 mm	14	7.62 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			22.86 mm	CMOS	10 mA	5 V	1	SPI	2.54 mm	R-PDIP-T18			YES	e3	0
MCP2515-I/SOVAO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, CAN	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8	AEC-Q100	0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm	14	7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3	0
MCP2515-I/SOGRB2	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		TS 16949	0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3
MCP2515-I/SORB2	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		TS 16949	0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3
MCP2515T-I/SO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, CAN	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8		0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	Matte Tin (Sn)	DUAL	2.65 mm	14	7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz	40	260	11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18	2		YES	e3	0
MCP2515-E/SOVAO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, CAN	AUTOMOTIVE	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8	AEC-Q100	0	SMALL OUTLINE	SOP18,.4	4.5 V	125 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm	14	7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3	0
MCP2515-E/SORB4	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	AUTOMOTIVE	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		TS 16949	0	SMALL OUTLINE	SOP18,.4	4.5 V	125 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3
MCP2510-I/P	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, LAN	INDUSTRIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	8	TS 16949	0	IN-LINE	DIP18,.3	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	4.32 mm	14	7.62 mm	OPERATES AT 3V MINIMUM SUPPLY @ 16 MHZ	NO	NRZ	SYNC; BIT ;BYTE	25 MHz			22.86 mm	CMOS	10 mA	5 V	1	SPI	2.54 mm	R-PDIP-T18		Not Qualified	YES	e3
MCP2515T-I/SOVAO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, CAN	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8	AEC-Q100	0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm	14	7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3	0
MCP2510-I/SO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, LAN	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8	TS 16949	0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	14	7.5 mm	OPERATES AT 3V MINIMUM SUPPLY @ 16 MHZ	NO	NRZ	SYNC; BIT ;BYTE	25 MHz	40	260	11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18	1	Not Qualified	YES	e3
MCP2515-E/SORB2	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	AUTOMOTIVE	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		TS 16949	0	SMALL OUTLINE	SOP18,.4	4.5 V	125 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3
MCP2515T-E/SO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	AUTOMOTIVE	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			0	SMALL OUTLINE	SOP18,.4	4.5 V	125 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz		260	11.55 mm	CMOS		5 V	1	CAN, SPI	1.27 mm	R-PDSO-G18	1	Not Qualified	YES	e3
MCP2510T-I/SO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, LAN	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8	TS 16949	0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	Matte Tin (Sn)	DUAL	2.65 mm	14	7.5 mm	OPERATES AT 3V MINIMUM SUPPLY @ 16 MHZ	NO	NRZ	SYNC; BIT ;BYTE	25 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18	2	Not Qualified	YES	e3
MCP2515T-I/SORB2	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		TS 16949	0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3
MCP2515T-I/SORB4	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		TS 16949	0	SMALL OUTLINE	SOP18,.4	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3
MCP2515T-E/SOVAO	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	AUTOMOTIVE	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V		AEC-Q100; TS 16949	0	SMALL OUTLINE	SOP18,.4	4.5 V	125 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			11.55 mm	CMOS	10 mA	5 V	1	SPI	1.27 mm	R-PDSO-G18			YES	e3
MCP2515-I/PRB2	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	INDUSTRIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V		TS 16949	0	IN-LINE	DIP18,.3	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	5.334 mm		7.62 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			22.86 mm	CMOS	10 mA	5 V	1	SPI	2.54 mm	R-PDIP-T18			YES	e3
MCP2515-I/PRB4	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	INDUSTRIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V		TS 16949	0	IN-LINE	DIP18,.3	4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	5.334 mm		7.62 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			22.86 mm	CMOS	10 mA	5 V	1	SPI	2.54 mm	R-PDIP-T18			YES	e3
MCP2510-I/SOG	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, LAN	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V			0	SMALL OUTLINE		4.5 V	85 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm	OPERATES AT 3V MINIMUM SUPPLY @ 16 MHZ	NO	NRZ		25 MHz			11.55 mm	CMOS		5 V	1		1.27 mm	R-PDSO-G18	1	Not Qualified	YES	e3
MCP2515-E/P	Microchip Technology	SERIAL IO/COMMUNICATION CONTROLLER, CAN	AUTOMOTIVE	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	8		0	IN-LINE	DIP18,.3	4.5 V	125 Cel	.125 MBps	-40 Cel	MATTE TIN	DUAL	5.334 mm	14	7.62 mm		NO	NRZ	SYNC; BIT ;BYTE	40 MHz			22.86 mm	CMOS	10 mA	5 V	1	SPI	2.54 mm	R-PDIP-T18			YES	e3	0
TMS9902ANL	Texas Instruments	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL	COMMERCIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V			15	IN-LINE		4.75 V	70 Cel		0 Cel		DUAL	5.1 mm		7.62 mm	LENGTH-MAX	NO		ASYNC, BIT		NOT SPECIFIED	NOT SPECIFIED	23.3 mm	CMOS		5 V	5		2.54 mm	R-PDIP-T18			NO

Serial Communication Controllers

Serial communication controllers are electronic devices that manage the input/output operations between a computer or microcontroller and other devices through serial communication protocols such as UART, SPI, I2C, and USB. These controllers provide an interface that allows the computer or microcontroller to send and receive data over a serial connection and manage the communication operations.

Serial communication controllers can be integrated into the computer or microcontroller's chipset or added as an external module. They typically include a serial interface that connects to the device and a host interface that connects to the computer or microcontroller's bus system. The serial interface can be based on various standards such as UART, SPI, or I2C, while the host interface can be based on various standards such as PCI, PCIe, or USB.

Serial communication controllers offer various benefits such as increased data transfer rates, improved reliability, and increased compatibility with a wide range of devices. They also provide advanced features such as error checking, flow control, and clock synchronization that can improve the accuracy and reliability of the communication.