8 Timers & Real-Time Clocks 770

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Information Access Method	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	No. of Bits	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Interrupt Capability	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	RAM Words	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	No. of Timers	Technology	Maximum Supply Current	Minimum Time	Nominal Supply Voltage	Sub-Category	Bus Compatibility	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Volatile	JESD-609 Code
DS1340Z-18+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	1.89 V				1.8	SMALL OUTLINE	SOP8,.25	N	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz	30	260	4.9 mm		CMOS		SECONDS	1.8 V	Timer or RTC		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
ISL12026AIBZ	Renesas Electronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE			2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.75 mm		3.9 mm				30	260	4.9 mm		CMOS			3.3 V			1.27 mm	R-PDSO-G8	1			e3
MCP7940N-E/SNVAO	Microchip Technology	TIMER, REAL TIME CLOCK	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	AEC-Q100; TS 16949			SMALL OUTLINE	SOP8,.23	Y	1.8 V	125 Cel	-40 Cel		DUAL	1.75 mm	64	3.9 mm		0	.032 MHz			4.9 mm	1	CMOS	.4 mA	SECONDS	2.5 V			1.27 mm	R-PDSO-G8			YES
PCF8593TD-T	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	6 V				3/5	SMALL OUTLINE	SOP8,.25	Y	2.5 V	85 Cel	-40 Cel		DUAL	1.75 mm		3.9 mm			.032 MHz	NOT SPECIFIED	NOT SPECIFIED	4.9 mm	0	CMOS		1/100 SECOND	3 V	Timer or RTC		1.27 mm	R-PDSO-G8		Not Qualified	YES
PT7C4563BQ1WEX	Diodes Incorporated	TIMER, REAL TIME CLOCK	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V		AEC-Q100			SMALL OUTLINE	SOP8,.25	Y	1.3 V	125 Cel	-40 Cel		DUAL	1.75 mm		3.9 mm		0	.032768 MHz			4.9 mm	1	CMOS	.035 mA	SECONDS	3 V			1.27 mm	R-PDSO-G8			NO
S-35390A-I8T1U	Ablic	TIMER, REAL TIME CLOCK	INDUSTRIAL	FLAT	8	VSOF	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 2-WIRE/I2C	5.5 V					SMALL OUTLINE, VERY THIN PROFILE			1.3 V	85 Cel	-40 Cel	TIN	DUAL	.5 mm		1.97 mm			.032 MHz			2.23 mm	1	CMOS			3 V			.5 mm	R-PDSO-F8		Not Qualified		e3
TS3006ITD833	Silicon Labs	TIMER, PROGRAMMABLE	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES		5.25 V					SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			1.55 V	85 Cel	-40 Cel		DUAL	.8 mm		3 mm		0	.3 MHz			3 mm	0	CMOS			3 V			.65 mm	S-PDSO-N8
DS1340U-18+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	1.89 V				1.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm		CMOS		SECONDS	1.8 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1341T+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-N8	1	Not Qualified	YES	e3
DS1308U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1672S-2+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	2.2 V				2	SMALL OUTLINE	SOP8,.25	N	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz	30	260	4.9 mm	0	CMOS		SECONDS	2 V	Timers or RTCs		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1308U-18+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.4 MHz	30	260	3 mm	1	CMOS		SECONDS	1.8 V	Timer or RTC		.65 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1339U-2+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	2.2 V				2	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	2 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1338U-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1672S-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V				3	SMALL OUTLINE	SOP8,.25	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz	30	260	4.9 mm	0	CMOS		SECONDS	3 V	Timers or RTCs		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1342T+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-N8	1	Not Qualified	YES	e3
DS1308U-18+T	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.4 MHz	30	260	3 mm	1	CMOS		SECONDS	1.8 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1308U-3+T	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1672U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	0	CMOS		SECONDS	3 V	Timers or RTCs		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1340U-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm		CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1339U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1338U-18+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				1.8	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	1.8 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1372U+TR	Analog Devices		INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2.4/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.4 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz			3 mm	1	CMOS		SECONDS		Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified		e3
DS1339U-2+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	2.2 V				2	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	2 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1347T+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 4 WIRE/SPI	5.5 V			8	2.5/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Y	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm		3 mm		0	.032 MHz	30	260	3 mm		CMOS		SECONDS	3.3 V	Timer or RTC		.65 mm	S-PDSO-N8	1	Not Qualified	YES	e3
DS1388Z-3+TR	Analog Devices		INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V				3	SMALL OUTLINE	SOP8,.25	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz			4.9 mm		CMOS		1/100 SECOND	3 V	Timers or RTCs		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
MAX16998DAUA+	Analog Devices	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		40 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			5 V	125 Cel	-40 Cel		DUAL	1.1 mm		3 mm						3 mm	1	BICMOS			14 V			.65 mm	S-PDSO-G8	1	Not Qualified
DS1342T+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-N8	1	Not Qualified	YES	e3
MAX16997AAUA+T	Analog Devices				8			PLASTIC/EPOXY								SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						Matte Tin (Sn) - annealed	DUAL							30	260		1	CMOS								1			e3
DS1338U-18+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			1.71 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm				30	260	3 mm	1	CMOS			1.8 V			.65 mm	S-PDSO-G8	1			e3
DS1341T+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-N8	1	Not Qualified	YES	e3
DS1672U-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.63 V				3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	0	CMOS		SECONDS	3.3 V	Timers or RTCs		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1672S-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V				3	SMALL OUTLINE	SOP8,.25	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz	30	260	4.9 mm	0	CMOS		SECONDS	3 V	Timers or RTCs		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1372U+	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2.4/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.4 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS		Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified		e3
DS1341U+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	YES	e3
DS1678+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	I2C	5.5 V				5	IN-LINE	DIP8,.3	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	4.572 mm		7.62 mm			.032 MHz	30	260	9.375 mm	0	CMOS		SECONDS	5 V	Timer or RTC		2.54 mm	R-PDIP-T8	1	Not Qualified	NO	e3
DS1339U-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1340U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V				3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm		CMOS		SECONDS	3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
MK41T56N00	STMicroelectronics	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	I2C	5.5 V	8			5	IN-LINE	DIP8,.3	N	4.5 V	70 Cel	0 Cel	TIN LEAD	DUAL	4.8 mm	56	7.62 mm	AUTO WORD INCREMENTING; ACCURACY 1 MIN/MONTH @ 25 DEGREE C; SOFTWARE CLOCK CALIBRATION		.032 MHz			9.55 mm	0	CMOS	1 mA	SECONDS	5 V	Timer or RTC	I2C	2.54 mm	R-PDIP-T8		Not Qualified	YES	e0
M8716AB1	STMicroelectronics		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	SERIAL, 2 WIRE/I2C					5	IN-LINE	DIP8,.3	N		70 Cel	0 Cel	TIN LEAD	DUAL											CMOS		SECONDS	5 V	Timer or RTC		2.54 mm	R-PDIP-T8		Not Qualified	YES	e0
MKI41T56N00	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	I2C	5.5 V	8			5	IN-LINE	DIP8,.3	N	4.5 V	85 Cel	-40 Cel	TIN LEAD	DUAL	4.8 mm	56	7.62 mm			.032 MHz			9.55 mm	0	CMOS	1 mA	SECONDS	5 V	Timer or RTC	I2C	2.54 mm	R-PDIP-T8		Not Qualified	YES	e0
MK41T56N	STMicroelectronics	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	I2C						IN-LINE				70 Cel	0 Cel		DUAL	4.8 mm		7.62 mm						9.55 mm		CMOS						2.54 mm	R-PDIP-T8		Not Qualified
M8716BB1	STMicroelectronics	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	I2C	5.5 V					IN-LINE			4.5 V	70 Cel	0 Cel		DUAL	4.57 mm		7.62 mm	128HZ & SEC FIXED O/P'S		.1 MHz				0	CMOS	1 mA		5 V			2.54 mm	R-PDIP-T8		Not Qualified
MKI41T56S00	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8			5	SMALL OUTLINE	SOP8,.25	N	4.5 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm	56	3.9 mm	AUTO WORD INCREMENTING; ACCURACY 1 MIN/MONTH @ 25 DEGREE C; SOFTWARE CLOCK CALIBRATION		.032 MHz			4.9 mm	0	CMOS	1 mA	SECONDS	5 V	Timer or RTC	I2C	1.27 mm	R-PDSO-G8	1	Not Qualified	YES	e4
MK41T5600	STMicroelectronics		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	SERIAL, 2 WIRE/I2C					5	IN-LINE	DIP8,.3	N		70 Cel	0 Cel	Tin/Lead (Sn/Pb)	DUAL											CMOS		SECONDS	5 V	Timer or RTC		2.54 mm	R-PDIP-T8		Not Qualified	YES	e0
MKI41T56S00TR	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8			5	SMALL OUTLINE	SOP8,.25	N	4.5 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm	56	3.9 mm	AUTO WORD INCREMENTING; ACCURACY 1 MIN/MONTH @ 25 DEGREE C; SOFTWARE CLOCK CALIBRATION		.032 MHz			4.9 mm	0	CMOS	1 mA	SECONDS	5 V	Timer or RTC	I2C	1.27 mm	R-PDSO-G8	1	Not Qualified	YES	e4
MK41T56S	STMicroelectronics	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C						SMALL OUTLINE				70 Cel	0 Cel		DUAL	1.75 mm		3.9 mm						4.9 mm		CMOS						1.27 mm	R-PDSO-G8		Not Qualified
MK41T56S00TR	STMicroelectronics	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8			5	SMALL OUTLINE	SOP8,.25	N	4.5 V	70 Cel	0 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm	56	3.9 mm	AUTO WORD INCREMENTING; ACCURACY 1 MIN/MONTH @ 25 DEGREE C; SOFTWARE CLOCK CALIBRATION		.032 MHz			4.9 mm	0	CMOS	1 mA	SECONDS	5 V	Timer or RTC	I2C	1.27 mm	R-PDSO-G8		Not Qualified	YES	e4

Timers & Real-Time Clocks

Timers and real-time clocks (RTCs) are electronic devices that are used to measure and track time intervals in electronic systems. They are crucial components in many applications, such as control systems, automation systems, and consumer electronics.

A timer is an electronic device that is used to measure the duration of time intervals. Timers can be either digital or analog and can be used to measure time intervals ranging from microseconds to hours or even days. They can be used for a variety of applications, such as controlling the duration of a signal or triggering an event after a specified time interval.

A real-time clock (RTC) is a clock that keeps track of the current time and date. Unlike a timer, an RTC is capable of keeping track of time even when the system is powered off. RTCs are commonly used in consumer electronics such as watches, clocks, and digital cameras, as well as in control systems, data loggers, and other applications that require accurate timekeeping.