TIMER, PROGRAMMABLE Timers & Real-Time Clocks 314

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Information Access Method	Maximum Supply Voltage	Screening Level	No. of Bits	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Interrupt Capability	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	No. of Timers	Technology	Minimum Time	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Volatile	JESD-609 Code
STWD100NYWY3F	STMicroelectronics	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			2.7 V	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.45 mm	1.6 mm				30	260	2.9 mm		CMOS		5 V		.95 mm	R-PDSO-G5	1	Not Qualified		e4
CS82C54-10Z96	Renesas Electronics	TIMER, PROGRAMMABLE	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		16		CHIP CARRIER			4.5 V	70 Cel	0 Cel	MATTE TIN	QUAD	4.57 mm	11.505 mm		8	10 MHz	30	245	11.505 mm	3	CMOS		5 V		1.27 mm	S-PQCC-J28	3	Not Qualified		e3
STWD100PYW83F	STMicroelectronics	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	5	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2.7 V	125 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	1.25 mm						2 mm		CMOS		5 V		.65 mm	R-PDSO-G5	1	Not Qualified		e3
CS82C54-10Z	Renesas Electronics	TIMER, PROGRAMMABLE	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		16		CHIP CARRIER			4.5 V	70 Cel	0 Cel	MATTE TIN	QUAD	4.57 mm	11.505 mm		8	10 MHz	30	245	11.505 mm	3	CMOS		5 V		1.27 mm	S-PQCC-J28	3	Not Qualified		e3
MC14536BDWG	Onsemi	TIMER, PROGRAMMABLE	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		18 V				SMALL OUTLINE			3 V	125 Cel	-55 Cel	MATTE TIN	DUAL	2.65 mm	7.5 mm			2 MHz	30	260	10.3 mm	1	CMOS		5 V		1.27 mm	R-PDSO-G16	3	Not Qualified		e3
IS82C54-10Z96	Renesas Electronics	TIMER, PROGRAMMABLE	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		16		CHIP CARRIER			4.5 V	85 Cel	-40 Cel	MATTE TIN	QUAD	4.57 mm	11.505 mm		8		30	245	11.505 mm	6	CMOS		5 V		1.27 mm	S-PQCC-J28	3	Not Qualified		e3
DS1683S+T&R	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3/5	SMALL OUTLINE	SOP8,.25	Y	2.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm	3.9 mm			.4 MHz	30	260	4.9 mm		CMOS	SECONDS		Timers or RTCs	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS12887A+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	5.5 V			5	IN-LINE	DIP24,.6	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm	15.24 mm		8	.032 MHz			33.782 mm	1	CMOS	SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e3
STWD100YNYWY3F	STMicroelectronics	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V	AEC-Q100			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			2.7 V	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.45 mm	1.6 mm		0			260	2.9 mm	0	CMOS		5 V		.95 mm	R-PDSO-G5	1			e4
DS1683S+	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3/5	SMALL OUTLINE	SOP8,.25	Y	2.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm	3.9 mm			.4 MHz	30	260	4.9 mm		CMOS	SECONDS		Timers or RTCs	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
IS82C54-10Z	Renesas Electronics	TIMER, PROGRAMMABLE	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		16		CHIP CARRIER			4.5 V	85 Cel	-40 Cel	MATTE TIN	QUAD	4.57 mm	11.505 mm		8	10 MHz	30	245	11.505 mm	3	CMOS		5 V		1.27 mm	S-PQCC-J28	3	Not Qualified		e3
IS82C54Z	Renesas Electronics	TIMER, PROGRAMMABLE	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		16		CHIP CARRIER			4.5 V	85 Cel	-40 Cel	MATTE TIN	QUAD	4.57 mm	11.505 mm		8	8 MHz	30	245	11.505 mm	3	CMOS		5 V		1.27 mm	S-PQCC-J28	3	Not Qualified		e3
DS2413P+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	C BEND	6	SOC	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 1-WIRE	5.25 V				SMALL OUTLINE			2.8 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.5 mm	3.81 mm		0		30	260	3.937 mm	1	CMOS		3.3 V		1.27 mm	R-PDSO-C6	1	Not Qualified		e3
DS2413P+T&R	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	C BEND	6	SOC	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 1-WIRE	5.25 V				SMALL OUTLINE			2.8 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.5 mm	3.81 mm		0		30	260	3.937 mm	1	CMOS		3.3 V		1.27 mm	R-PDSO-C6	1	Not Qualified		e3
DS12887+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	5.5 V			5	IN-LINE	DIP24,.6	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm	15.24 mm	DAYLIGHT SAVINGS OPTION; SELECTABLE MOTOROLA/INTEL TIMING; 10 YEARS DATA RETENTION	8	.032 MHz			33.782 mm	1	CMOS	SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e3
MC14536BDWR2G	Onsemi	TIMER, PROGRAMMABLE	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		18 V				SMALL OUTLINE			3 V	125 Cel	-55 Cel	MATTE TIN	DUAL	2.65 mm	7.5 mm			2 MHz	30	260	10.3 mm	1	CMOS		5 V		1.27 mm	R-PDSO-G16	3	Not Qualified		e3
DS2413P+T	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	C BEND	6	SOC	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 1-WIRE	5.25 V				SMALL OUTLINE			2.8 V	70 Cel	0 Cel		DUAL	1.5 mm	3.81 mm		0		30	260	3.937 mm		CMOS		3.3 V		1.27 mm	R-PDSO-C6		Not Qualified
CS82C54Z96	Renesas Electronics	TIMER, PROGRAMMABLE	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		16		CHIP CARRIER			4.5 V	70 Cel	0 Cel	MATTE TIN	QUAD	4.57 mm	11.505 mm		8	8 MHz	30	245	11.505 mm	3	CMOS		5 V		1.27 mm	S-PQCC-J28	3	Not Qualified		e3
MC14541BDR2G	Onsemi	TIMER, PROGRAMMABLE	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		18 V				SMALL OUTLINE			3 V	125 Cel	-55 Cel	MATTE TIN	DUAL	1.75 mm	3.9 mm		0	3 MHz	30	260	8.65 mm	1	CMOS		5 V		1.27 mm	R-PDSO-G14	1	Not Qualified		e3
CS82C54Z	Renesas Electronics	TIMER, PROGRAMMABLE	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		16		CHIP CARRIER			4.5 V	70 Cel	0 Cel	MATTE TIN	QUAD	4.57 mm	11.505 mm		8	8 MHz	30	245	11.505 mm	3	CMOS		5 V		1.27 mm	S-PQCC-J28	3	Not Qualified		e3
STWD100NPWY3F	STMicroelectronics	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			2.7 V	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.45 mm	1.6 mm				30	260	2.9 mm		CMOS		5 V		.95 mm	R-PDSO-G5	1	Not Qualified		e4
STWD100NXWY3F	STMicroelectronics	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			2.7 V	125 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.45 mm	1.6 mm					260	2.9 mm		CMOS		5 V		.95 mm	R-PDSO-G5	1	Not Qualified		e4
MC14541BDG	Onsemi	TIMER, PROGRAMMABLE	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		18 V				SMALL OUTLINE			3 V	125 Cel	-55 Cel	MATTE TIN	DUAL	1.75 mm	3.9 mm		0	3 MHz	30	260	8.65 mm	1	CMOS		5 V		1.27 mm	R-PDSO-G14	1	Not Qualified		e3
DS12C887+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	5.5 V			5	IN-LINE	DIP24,.6	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm	15.24 mm		8	.032 MHz			33.782 mm	1	CMOS	SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e3
IP82C54-10Z	Renesas Electronics	TIMER, PROGRAMMABLE	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	5.5 V		16		IN-LINE			4.5 V	85 Cel	-40 Cel	MATTE TIN	DUAL	6.35 mm	15.24 mm		8	10 MHz			31 mm	3	CMOS		5 V		2.54 mm	R-PDIP-T24		Not Qualified		e3
STWD100YNXWY3F	STMicroelectronics	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V	AEC-Q100			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			2.7 V	125 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	1.45 mm	1.6 mm		0		30	260	2.9 mm	0	CMOS		5 V		.95 mm	R-PDSO-G5	1			e4
MAX16998AAUA+	Analog Devices	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		40 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			5 V	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm				30	260	3 mm	1	BICMOS		14 V		.65 mm	S-PDSO-G8	1	Not Qualified		e3
HEF4541BT,512	NXP Semiconductors	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	15 V				SMALL OUTLINE				85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	1.75 mm	3.9 mm		0		30	260	8.65 mm	1	CMOS		5 V		1.27 mm	R-PDSO-G14	3	Not Qualified		e4
CP82C54-10Z	Renesas Electronics	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	5.5 V		16		IN-LINE			4.5 V	70 Cel	0 Cel	MATTE TIN	DUAL	6.35 mm	15.24 mm		8	10 MHz			31 mm	3	CMOS		5 V		2.54 mm	R-PDIP-T24		Not Qualified		e3
STWD100NWWY3F	STMicroelectronics	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			2.7 V	125 Cel	-40 Cel		DUAL	1.45 mm	1.6 mm				NOT SPECIFIED	NOT SPECIFIED	2.9 mm		CMOS		5 V		.95 mm	R-PDSO-G5		Not Qualified
STWD100YNPWY3F	STMicroelectronics	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V	AEC-Q100			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			2.7 V	125 Cel	-40 Cel		DUAL	1.45 mm	1.6 mm		0		NOT SPECIFIED	NOT SPECIFIED	2.9 mm	0	CMOS		5 V		.95 mm	R-PDSO-G5
FT7522L6X	Onsemi	TIMER, PROGRAMMABLE	INDUSTRIAL	BUTT	6	VBCC	RECTANGULAR	UNSPECIFIED	YES		5 V				CHIP CARRIER, VERY THIN PROFILE			1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	BOTTOM	.55 mm	1 mm		0		30	260	1.45 mm	0	CMOS				.5 mm	R-XBCC-B6	1			e4
CP82C54Z	Renesas Electronics	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	5.5 V		16		IN-LINE			4.5 V	70 Cel	0 Cel	MATTE TIN	DUAL	6.35 mm	15.24 mm		8	8 MHz			31 mm	3	CMOS		5 V		2.54 mm	R-PDIP-T24		Not Qualified		e3
MAX16998AAUA/V+	Analog Devices	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		40 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			5 V	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm				30	260	3 mm	1	BICMOS		14 V		.65 mm	S-PDSO-G8	1	Not Qualified		e3
IS82C54-10	Renesas Electronics	TIMER, PROGRAMMABLE	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		16		CHIP CARRIER			4.5 V	85 Cel	-40 Cel	TIN LEAD	QUAD	4.57 mm	11.505 mm		8	10 MHz			11.505 mm	3	CMOS		5 V		1.27 mm	S-PQCC-J28	1	Not Qualified		e0
HEF4541BT,518	NXP Semiconductors	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	15 V				SMALL OUTLINE				85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	1.75 mm	3.9 mm		0		30	260	8.65 mm	1	CMOS		5 V		1.27 mm	R-PDSO-G14	3	Not Qualified		e4
FTL75939UCX	Onsemi	TIMER, PROGRAMMABLE	INDUSTRIAL	BALL	12	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES		5.5 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH			1.2 V	85 Cel	-40 Cel	TIN SILVER COPPER	BOTTOM	.625 mm	1.31 mm				30	260	1.615 mm		CMOS		1.8 V		.4 mm	R-PBGA-B12	1			e1
Z84C3006PEG	IXYS Corporation	TIMER, PROGRAMMABLE		THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		5.5 V		8		IN-LINE			4.5 V	100 Cel	-40 Cel	MATTE TIN	DUAL	4.96 mm	15.24 mm		8	6.17 MHz			36.96 mm	1	CMOS		5 V		2.54 mm	R-PDIP-T28		Not Qualified		e3
HEF4541BT	NXP Semiconductors	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	15 V				SMALL OUTLINE				85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	1.75 mm	3.9 mm		0		30	260	8.65 mm	1	CMOS		5 V		1.27 mm	R-PDSO-G14	3	Not Qualified		e4
HEF4541BT,653	NXP Semiconductors	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	15 V				SMALL OUTLINE				85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm	3.9 mm		0				8.65 mm	1	CMOS		5 V		1.27 mm	R-PDSO-G14	3	Not Qualified		e4
UPD71054C	Renesas Electronics	TIMER, PROGRAMMABLE	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	5.5 V		16		IN-LINE			4.5 V	85 Cel	-40 Cel	TIN LEAD	DUAL	5.72 mm	15.24 mm		8	8 MHz				3	CMOS		5 V		2.54 mm	R-PDIP-T24				e0
DS12C887A+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	5.5 V			5	IN-LINE	DIP24,.6	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm	15.24 mm		8	.032 MHz			33.782 mm	1	CMOS	SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e3
ID82C54	Renesas Electronics	TIMER, PROGRAMMABLE	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	PARALLEL, DIRECT ADDRESS	5.5 V		16		IN-LINE			4.5 V	85 Cel	-40 Cel	TIN LEAD	DUAL	5.72 mm	15.24 mm		8	8 MHz				3	CMOS		5 V		2.54 mm	R-CDIP-T24		Not Qualified		e0
DS12885QN+	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	5.5 V			5	CHIP CARRIER	LDCC28,.5SQ	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	4.57 mm	11.505 mm	DAYLIGHT SAVINGS OPTION; SELECTABLE MOTOROLA/INTEL TIMING	8	.032 MHz		245	11.505 mm	1	CMOS	SECONDS	5 V	Timer or RTC	1.27 mm	S-PQCC-J28	1	Not Qualified	NO	e3
CP82C54-12Z	Renesas Electronics	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	5.5 V		16		IN-LINE			4.5 V	70 Cel	0 Cel	MATTE TIN	DUAL	6.35 mm	15.24 mm		8	12 MHz			31 mm	3	CMOS		5 V		2.54 mm	R-PDIP-T24		Not Qualified		e3
MAX16997AAUA+	Analog Devices	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		40 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			5 V	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm				30	260	3 mm	1	BICMOS		14 V		.65 mm	S-PDSO-G8	1	Not Qualified		e3
MC14541BDTR2G	Onsemi	TIMER, PROGRAMMABLE	MILITARY	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		18 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			3 V	125 Cel	-55 Cel	MATTE TIN	DUAL	1.2 mm	4.4 mm		0	3 MHz	30	260	5 mm	1	CMOS		5 V		.65 mm	R-PDSO-G14	1	Not Qualified		e3
CS82C54-10	Renesas Electronics	TIMER, PROGRAMMABLE	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		16		CHIP CARRIER			4.5 V	70 Cel	0 Cel	TIN LEAD	QUAD	4.57 mm	11.505 mm		8	10 MHz			11.505 mm	3	CMOS		5 V		1.27 mm	S-PQCC-J28	3	Not Qualified		e0

Timers & Real-Time Clocks

Timers and real-time clocks (RTCs) are electronic devices that are used to measure and track time intervals in electronic systems. They are crucial components in many applications, such as control systems, automation systems, and consumer electronics.

A timer is an electronic device that is used to measure the duration of time intervals. Timers can be either digital or analog and can be used to measure time intervals ranging from microseconds to hours or even days. They can be used for a variety of applications, such as controlling the duration of a signal or triggering an event after a specified time interval.

A real-time clock (RTC) is a clock that keeps track of the current time and date. Unlike a timer, an RTC is capable of keeping track of time even when the system is powered off. RTCs are commonly used in consumer electronics such as watches, clocks, and digital cameras, as well as in control systems, data loggers, and other applications that require accurate timekeeping.