INDUSTRIAL Timers & Real-Time Clocks 1,864

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Information Access Method	Maximum Supply Voltage	No. of Bits	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Interrupt Capability	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	No. of Timers	Technology	Minimum Time	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Volatile	JESD-609 Code
DS12R885S-5+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	5.5 V		5	SMALL OUTLINE	SOP24,.4	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.67 mm	7.495 mm	8	.032 MHz	30	260	15.365 mm	1	CMOS	SECONDS	5 V	Timer or RTC	1.27 mm	R-PDSO-G24	1	Not Qualified	NO	e3
DS1315SN-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, FIXED PROTOCOL	3.6 V		3.3	SMALL OUTLINE	SOP16,.4	N	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	7.5 mm	0	.032 MHz	30	260	10.3 mm	0	CMOS	1/100 SECOND	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G16	1	Not Qualified	YES	e3
DS1251W-120IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	PIN/PEG	32	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	IN-LINE	DIP32,.6	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	10.922 mm	15.24 mm	8				43.053 mm		CMOS	1/100 SECOND	3.3 V	Timer or RTC	2.54 mm	R-PDIP-P32		Not Qualified	NO	e3
DS1554WP-120IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	J INVERTED	34		RECTANGULAR	UNSPECIFIED	YES	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	MICROELECTRONIC ASSEMBLY	MODULE,34LEAD,1.0	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.3368 mm	23.495 mm	8	.032 MHz			25.019 mm		CMOS	SECONDS	3.3 V	Timer or RTC	1.27 mm	R-XDMA-U34		Not Qualified	NO	e3
DS1341T+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V		2/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm	3 mm	0	.032 MHz	30	260	3 mm	1	CMOS	SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-N8	1	Not Qualified	YES	e3
DS17885EN-3	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	TSOP1	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	3.3 V		3	SMALL OUTLINE, THIN PROFILE	TSSOP28,.53,22	Y	2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.2 mm	8 mm	8	.032 MHz			11.8 mm	1	CMOS	SECONDS	3 V	Timer or RTC	.55 mm	R-PDSO-G28		Not Qualified	NO	e0
DS1558Y+TRL	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V		5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	1.2 mm	7 mm	8	.032 MHz	30	260	7 mm		CMOS	SECONDS	5 V	Timer or RTC	.5 mm	S-PQFP-G48	1	Not Qualified	NO	e3
DS1685EN-5+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	5.5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm	8	.032 MHz	30	260	7.8 mm	1	CMOS	SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1315SN+5	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, FIXED PROTOCOL	5.5 V			SMALL OUTLINE			4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.68 mm	7.51 mm		.032 MHz			10.335 mm		CMOS		5 V		1.27 mm	R-PDSO-G16		Not Qualified		e3
DS1744WP-120IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	J INVERTED	34		RECTANGULAR	UNSPECIFIED	YES	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	MICROELECTRONIC ASSEMBLY	MODULE,34LEAD,1.0	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.3368 mm	23.495 mm	8	.032 MHz			25.019 mm	0	CMOS	SECONDS	3.3 V	Timer or RTC	1.27 mm	R-XDMA-U34		Not Qualified	NO	e3
DS1339C-3#	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V			SMALL OUTLINE			2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	2.65 mm	7.5 mm		.032 MHz			10.3 mm	1	CMOS		3 V		1.27 mm	R-PDSO-G16	1	Not Qualified		e3
DS1672U-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.63 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm		.032 MHz	30	260	3 mm	0	CMOS	SECONDS	3.3 V	Timers or RTCs	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1672S-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V		3	SMALL OUTLINE	SOP8,.25	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm	3.9 mm		.032 MHz	30	260	4.9 mm	0	CMOS	SECONDS	3 V	Timers or RTCs	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1340C-3#	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V			SMALL OUTLINE			2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	7.5 mm		.032 MHz			10.3 mm		CMOS		3 V		1.27 mm	R-PDSO-G16	1	Not Qualified		e3
DS1747W-120IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	32	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	IN-LINE	DIP32,.6	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	10.922 mm	15.24 mm	8	.032 MHz			43.053 mm	0	CMOS	SECONDS	3.3 V	Timer or RTC	2.54 mm	R-PDIP-T32		Not Qualified	NO	e3
DS1556WP-120IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	J INVERTED	34		RECTANGULAR	UNSPECIFIED	YES	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	MICROELECTRONIC ASSEMBLY	MODULE,34LEAD,1.0	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL			8	.032 MHz					CMOS	SECONDS	3.3 V	Timer or RTC		R-XDMA-U34		Not Qualified	NO	e3
DS1315EN-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, FIXED PROTOCOL	3.6 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	N	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm	0	.032 MHz	30	260	6.5 mm	0	CMOS	1/100 SECOND	3.3 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1685QN-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	3.7 V		3	CHIP CARRIER	LDCC28,.5SQ	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	4.57 mm	11.505 mm	8	.032 MHz		245	11.505 mm	1	CMOS	SECONDS	3 V	Timer or RTC	1.27 mm	S-PQCC-J28	1	Not Qualified	YES	e3
DS1372U+	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V		2.4/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.4 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm		.032 MHz	30	260	3 mm	1	CMOS	SECONDS		Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified		e3
DS1341U+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V		2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm	0	.032 MHz	30	260	3 mm	1	CMOS	SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e3
DS17887-3IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	3.7 V		3	IN-LINE	DIP24,.6	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm	15.24 mm	8	.032 MHz			33.782 mm	1	CMOS	SECONDS	3 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e3
DS1391U-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm		.032 MHz	30	260	3 mm	1	CMOS	1/100 SECOND	3.3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	YES	e3
DS1678+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	I2C	5.5 V		5	IN-LINE	DIP8,.3	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	4.572 mm	7.62 mm		.032 MHz	30	260	9.375 mm	0	CMOS	SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T8	1	Not Qualified	NO	e3
DS17887N-3	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	3.3 V		3	IN-LINE	DIP24,.6	N	2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	5.08 mm	15.24 mm	8	.032 MHz			31.75 mm	1	CMOS	SECONDS	3 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e0
DS1682X	Analog Devices	TIMER, TIME RECORDER	INDUSTRIAL	BALL	6	VBGA	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V		3/5	GRID ARRAY, VERY THIN PROFILE	FLIP CHIP	Y	2.5 V	85 Cel	-40 Cel	TIN LEAD	BOTTOM	.864 mm	1.91 mm		.1 MHz			2.85 mm	0	CMOS	SECONDS	2.7 V	Timer or RTC		R-PBGA-B6		Not Qualified	NO	e0
DS1248Y-70IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	PIN/PEG	32	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	5.5 V		5	IN-LINE	DIP32,.6	N	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	10.922 mm	15.24 mm	8				43.053 mm		CMOS	1/100 SECOND	5 V	Timer or RTC	2.54 mm	R-PDIP-P32	1	Not Qualified	NO	e3
DS1746W-120IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	32	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	IN-LINE	DIP32,.6	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	10.922 mm	15.24 mm	8	.032 MHz			43.053 mm		CMOS	SECONDS	3.3 V	Timers or RTCs	2.54 mm	R-PDIP-T32		Not Qualified	NO	e3
DS1558W+TRL	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD	1.2 mm	7 mm	8	.032 MHz	30	260	7 mm		CMOS	SECONDS	3.3 V	Timer or RTC	.5 mm	S-PQFP-G48	1	Not Qualified	NO	e3
DS1339U-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V		3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm		.032 MHz	30	260	3 mm	1	CMOS	SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1340U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.3 V		3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm		.032 MHz	30	260	3 mm		CMOS	SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1746WP-120IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	J INVERTED	34		RECTANGULAR	UNSPECIFIED	YES	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	MICROELECTRONIC ASSEMBLY	MODULE,34LEAD,1.0	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.3368 mm	23.495 mm	8	.032 MHz			25.019 mm		CMOS	SECONDS	3.3 V	Timers or RTCs	1.27 mm	R-XDMA-U34		Not Qualified	NO	e3
DS1501YN+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	5.5 V		5	IN-LINE	DIP28,.6	Y	4.5 V	85 Cel	-40 Cel	MATTE TIN	DUAL	5.08 mm	15.24 mm	8	.032 MHz	30	260	36.83 mm	1	CMOS	SECONDS	5 V	Timers or RTCs	2.54 mm	R-PDIP-T28	1	Not Qualified	YES	e3
FT7511L6X	Onsemi	TIMER, PROGRAMMABLE	INDUSTRIAL	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES		5 V			SMALL OUTLINE, VERY THIN PROFILE			1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM	DUAL	.55 mm	1 mm			30	260	1.45 mm		CMOS				.5 mm	R-PDSO-N6	1			e4
FT7521L6X	Onsemi	TIMER, PROGRAMMABLE	INDUSTRIAL	NO LEAD	6	VSON	RECTANGULAR	PLASTIC/EPOXY	YES		5 V			SMALL OUTLINE, VERY THIN PROFILE			2 V	85 Cel	-40 Cel	NICKEL PALLADIUM	DUAL	.55 mm	1 mm			30	260	1.45 mm		CMOS				.5 mm	R-PDSO-N6	1	Not Qualified		e4
FT7521FHX	Onsemi	TIMER, PROGRAMMABLE	INDUSTRIAL	NO LEAD	6	VSON	SQUARE	PLASTIC/EPOXY	YES		5 V			SMALL OUTLINE, VERY THIN PROFILE			1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM	DUAL	.55 mm	1 mm			30	260	1 mm		CMOS		3 V		.35 mm	S-PDSO-N6	1			e4
M48ST59W-100MH6	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	44	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	3.6 V		3/3.3	SMALL OUTLINE, SHRINK PITCH	SOP44,.5,32	Y	2.7 V	85 Cel	-40 Cel		DUAL	3.05 mm	8.56 mm	8	.032 MHz	NOT SPECIFIED	NOT SPECIFIED	18.1 mm	0	CMOS	SECONDS	3 V	Timer or RTC	.8 mm	R-PDSO-G44		Not Qualified	NO
M41ST85WMH6	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.6 V		3/3.3	SMALL OUTLINE	SOP28,.5	Y	2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	3.05 mm	8.56 mm	0	.032 MHz			18.1 mm	1	CMOS	1/100 SECOND	3 V	Timer or RTC	1.27 mm	R-PDSO-G28		Not Qualified	NO	e0
M41ST87YMX6TR	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V		5	SMALL OUTLINE	SOP28,.4	Y	4.5 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2.69 mm	7.62 mm		.032 MHz	30	250	17.96 mm	1	CMOS	1/100 SECOND	5 V	Timers or RTCs	1.27 mm	R-PDSO-G28	3	Not Qualified	NO	e4
M41ST95WMH6	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.6 V		3/3.3	SMALL OUTLINE	SOP28,.5	Y	2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	3.05 mm	8.56 mm	0	.032 MHz			18.1 mm	1	CMOS	1/100 SECOND	3 V	Timer or RTC	1.27 mm	R-PDSO-G28		Not Qualified	NO	e0
M41ST87YWX6T	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.6 V			SMALL OUTLINE			2.7 V	85 Cel	-40 Cel		DUAL	2.69 mm	7.62 mm					17.96 mm	1	CMOS		3 V		1.27 mm	R-PDSO-G28		Not Qualified
M41ST84W-70MH6	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.6 V		3/3.3	SMALL OUTLINE	SOP28,.5	Y	2.8 V	85 Cel	-40 Cel	TIN LEAD	DUAL	3.05 mm	8.56 mm		.032 MHz			18.1 mm	1	CMOS	1/100 SECOND	3 V	Timer or RTC	1.27 mm	R-PDSO-G28		Not Qualified	NO	e0
M41ST84YMQ6F	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V		5	SMALL OUTLINE	SOP16,.25	Y	4.5 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm	3.9 mm		.032 MHz			9.9 mm	1	CMOS	1/100 SECOND	5 V	Timer or RTC	1.27 mm	R-PDSO-G16	3	Not Qualified	YES	e4
M41ST85WMX6E	STMicroelectronics		INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 2 WIRE/I2C			3/3.3	SMALL OUTLINE	SOP28,.4	Y		85 Cel	-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL									CMOS	1/100 SECOND		Timer or RTC	1.27 mm	R-PDSO-G28		Not Qualified	NO	e4
M41ST84WMH6TR	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.6 V		3/3.3	SMALL OUTLINE	SOP28,.5	Y	2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	3.05 mm	8.56 mm	0	.032 MHz			18.1 mm	1	CMOS	1/100 SECOND	3 V	Timer or RTC	1.27 mm	R-PDSO-G28		Not Qualified	NO	e0
M41ST84YMQ6	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V		5	SMALL OUTLINE	SOP16,.25	Y	4.5 V	85 Cel	-40 Cel		DUAL	1.75 mm	3.9 mm	0	.032 MHz			9.9 mm	1	CMOS	1/100 SECOND	5 V	Timer or RTC	1.27 mm	R-PDSO-G16		Not Qualified	YES	e0
M41ST85W-70MH6TR	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.6 V		3/3.3	SMALL OUTLINE	SOP28,.5	Y	2.7 V	85 Cel	-40 Cel	TIN LEAD	DUAL	3.05 mm	8.56 mm		.032 MHz			18.1 mm	1	CMOS	1/100 SECOND		Timer or RTC	1.27 mm	R-PDSO-G28		Not Qualified	NO	e0
M41ST85YMX6	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V		5	SMALL OUTLINE	SOP28,.4	Y	4.5 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2.69 mm	7.62 mm		.032 MHz			17.96 mm	1	CMOS	1/100 SECOND	5 V	Timer or RTC	1.27 mm	R-PDSO-G28		Not Qualified	NO	e4
M41ST87YMX6T	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	5	SMALL OUTLINE	SOP28,.4	Y	4.5 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2.69 mm	7.62 mm		.032 MHz			17.96 mm	1	CMOS	1/100 SECOND	5 V	Timer or RTC	1.27 mm	R-PDSO-G28		Not Qualified	NO	e4

Timers & Real-Time Clocks

Timers and real-time clocks (RTCs) are electronic devices that are used to measure and track time intervals in electronic systems. They are crucial components in many applications, such as control systems, automation systems, and consumer electronics.

A timer is an electronic device that is used to measure the duration of time intervals. Timers can be either digital or analog and can be used to measure time intervals ranging from microseconds to hours or even days. They can be used for a variety of applications, such as controlling the duration of a signal or triggering an event after a specified time interval.

A real-time clock (RTC) is a clock that keeps track of the current time and date. Unlike a timer, an RTC is capable of keeping track of time even when the system is powered off. RTCs are commonly used in consumer electronics such as watches, clocks, and digital cameras, as well as in control systems, data loggers, and other applications that require accurate timekeeping.