INDUSTRIAL Timers & Real-Time Clocks 1,864

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Information Access Method	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	No. of Bits	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Interrupt Capability	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	RAM Words	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	No. of Timers	Technology	Maximum Supply Current	Minimum Time	Nominal Supply Voltage	Sub-Category	Bus Compatibility	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Volatile	JESD-609 Code
DS3232SN-C01#T&R	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE			2.3 V	85 Cel	-40 Cel		DUAL	2.67 mm		7.495 mm		0	.032 MHz	NOT SPECIFIED	NOT SPECIFIED	12.82 mm	1	CMOS			3.3 V			1.27 mm	R-PDSO-G20		Not Qualified
AB0805-T3	Abracon	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	I2C; SERIAL, 4-WIRE/3-WIRE	3.6 V					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			1.5 V	85 Cel	-40 Cel		QUAD	.9 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS			1.8 V			.5 mm	S-XQCC-N16	1
DS1305EN	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		4.4 mm		0	.032 MHz	20	240	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC		.65 mm	R-PDSO-G20	1	Not Qualified	YES	e0
DS1305EN+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC		.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
PCF85263AT/AJ	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL(I2C)	5.5 V	8				SMALL OUTLINE	SOP8,.25	Y	.9 V	85 Cel	-40 Cel		DUAL	1.75 mm	1	3.9 mm		0	.032768 MHz		260	4.9 mm	1	CMOS	.000885 mA	SECONDS	3.3 V			1.27 mm	R-PDSO-G8	1		NO
MCP7940N-I/ST	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949		2/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.25	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.2 mm	64	3 mm		0	.032 MHz			4.4 mm	1	CMOS	.4 mA	SECONDS	2.5 V	Timer or RTC		.65 mm	R-PDSO-G8		Not Qualified	YES	e3
MCP7940N-I/MS	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949		2/5	SMALL OUTLINE	SOP8,.19	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.1 mm	64	3 mm		0	.032 MHz			3 mm	1	CMOS	.4 mA	SECONDS	2.5 V	Timer or RTC		.65 mm	S-PDSO-G8		Not Qualified	YES	e3
PCF2127T/2Y	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	4.2 V				2/4	SMALL OUTLINE	SOP16,.4	Y	1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD SILVER	DUAL	2.65 mm		7.5 mm			.032 MHz	30	260	10.3 mm	1	CMOS		SECONDS	2 V	Timers or RTCs		1.27 mm	R-PDSO-G16	3	Not Qualified	NO	e4
DS1340Z-33	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				3.3	SMALL OUTLINE	SOP8,.25	N	2.97 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.75 mm		3.9 mm			.032 MHz			4.9 mm		CMOS		SECONDS	3.3 V	Timer or RTC		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e0
DS1340Z-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				3.3	SMALL OUTLINE	SOP8,.25	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz	30	260	4.9 mm		CMOS		SECONDS	3.3 V	Timer or RTC		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1337C	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE			1.8 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2.65 mm		7.5 mm			.032 MHz			10.3 mm	1	CMOS			3.3 V			1.27 mm	R-PDSO-G16	1	Not Qualified		e0
DS1337C+	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				1.8/5	SMALL OUTLINE	SOP16,.4	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	2.67 mm		7.5 mm			.032 MHz			10.3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC		1.27 mm	R-PDSO-G16	1	Not Qualified	YES	e3
DS1337C#	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				1.5/5	SMALL OUTLINE	SOP16,.4	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm		7.5 mm			.032 MHz	30	260	10.3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC		1.27 mm	R-PDSO-G16	1	Not Qualified	YES	e3
RTC-72423A3:ROHS	Seiko Epson		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL	5.5 V				5	SMALL OUTLINE	SOP24,.5	N	4.5 V	85 Cel	-40 Cel	TIN BISMUTH	DUAL	2.8 mm		7.9 mm	LG-MAX	4			260	16.3 mm		CMOS		SECONDS	5 V	Timer or RTC		1.27 mm	R-PDSO-G24		Not Qualified	YES	e6
RTC-72423:A3:ROHS	Toyocom U S A		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL	5.5 V				5	SMALL OUTLINE	SOP24,.5	N	4.5 V	85 Cel	-40 Cel	TIN BISMUTH	DUAL	2.8 mm		7.9 mm	LG-MAX	4			260	16.3 mm		CMOS		SECONDS	5 V	Timer or RTC		1.27 mm	R-PDSO-G24		Not Qualified	YES	e6
M41ST87WMX6TR	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.6 V				3/3.3	SMALL OUTLINE	SOP28,.4	Y	2.7 V	85 Cel	-40 Cel	MATTE TIN	DUAL	2.69 mm		7.62 mm			.032 MHz	30	260	17.96 mm	1	CMOS		1/100 SECOND	3 V	Timers or RTCs		1.27 mm	R-PDSO-G28	3	Not Qualified	NO	e3
DS1337U	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				1.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.1 mm		3 mm			.032 MHz		245	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	YES	e0
DS1337U+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				1.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC		.65 mm	S-PDSO-G8	1	Not Qualified	YES	e3
PCF8563TD	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE	SSOP8,.25	Y	1.8 V	85 Cel	-40 Cel		DUAL						.032 MHz	NOT SPECIFIED	NOT SPECIFIED		0	CMOS		SECONDS	2 V	Timer or RTC		.635 mm	R-PDSO-G8		Not Qualified	YES
PCF8563BS/4,118	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	HVSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH	SOLCC10,.11,20	Y	1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	2 V	Timer or RTC		.5 mm	S-PDSO-G10	1	Not Qualified	YES	e4
RTC-8564JE:B0:ROHS	Seiko Epson	TIMER, REAL TIME CLOCK	INDUSTRIAL	J BEND	20	LSOJ	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				1.8/5	SMALL OUTLINE, LOW PROFILE	SOJ20,.24,25	Y	1.8 V	85 Cel	-40 Cel	TIN SILVER	DUAL	1.5 mm		5.4 mm			.4 MHz		260	7 mm		CMOS	.0008 mA	SECONDS	3 V	Timers or RTCs		.65 mm	R-PDSO-J22		Not Qualified	YES	e2
BQ32000D	Texas Instruments	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.6 V				3.3	SMALL OUTLINE	SOP8,.25	N	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm		3.9 mm		0	.032 MHz	30	260	4.9 mm		CMOS		SECONDS	3.3 V	Timer or RTC	I2C	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e4
MCP79410T-I/SN	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	TS 16949		2/5	SMALL OUTLINE	SOP8,.23	Y	1.8 V	85 Cel	-40 Cel	MATTE TIN	DUAL	1.75 mm	64	3.9 mm	ALSO OPERATES AT 100KHZ WITH 1.8 V NOMINAL	0	.032 MHz	30	260	4.9 mm	1	CMOS	3 mA	SECONDS	2.5 V	Timers or RTCs		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
PCF2131TFY	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	16	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC16,.14,20	Y	3.3 V	85 Cel	-40 Cel		DUAL	1.5 mm		3.5 mm	also operates with 0.5 mhz @ 1.2v min supply		6.5 MHz		260	4.5 mm	1	CMOS	.8 mA	1/100 SECOND				.5 mm	R-PDSO-N16	3		NO
IS82C54-10Z96	Renesas Electronics	TIMER, PROGRAMMABLE	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V			16		CHIP CARRIER			4.5 V	85 Cel	-40 Cel	MATTE TIN	QUAD	4.57 mm		11.505 mm		8		30	245	11.505 mm	6	CMOS			5 V			1.27 mm	S-PQCC-J28	3	Not Qualified		e3
DS1683S+T&R	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				3/5	SMALL OUTLINE	SOP8,.25	Y	2.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.4 MHz	30	260	4.9 mm		CMOS		SECONDS		Timers or RTCs		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
RTC-8564JE:BB:ROHS	Seiko Epson	TIMER, REAL TIME CLOCK	INDUSTRIAL	J BEND	20	SOJ	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE			1.8 V	85 Cel	-40 Cel	TIN SILVER	DUAL	1.5 mm		5.4 mm					260	7 mm		CMOS			3 V			.65 mm	R-PDSO-J20				e2
PCF8583T/5,518	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	6 V	8			3/5	SMALL OUTLINE	SOP8,.4	Y	2.5 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2.65 mm	256	7.5 mm			.032 MHz		260	7.55 mm	0	CMOS	.2 mA	1/100 SECOND	5 V	Timer or RTC		1.27 mm	R-PDSO-G8	2	Not Qualified	YES	e4
DS1305EN+T&R/C01	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm						6.5 mm		CMOS			5 V			.65 mm	R-PDSO-G20	1
PCF8563T/F4	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				2/5	SMALL OUTLINE	SOP8,.25	Y	1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm		3.9 mm		0	.032 MHz	30	260	4.9 mm	1	CMOS		SECONDS	2 V	Timer or RTC		1.27 mm	R-PDSO-G8	1	Not Qualified	YES	e4
PCF85063BTL/1,118	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				1.2/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.11,20	Y	.9 V	85 Cel	-40 Cel		DUAL	.5 mm		2.6 mm					260	2.6 mm	1	CMOS		SECONDS	3.3 V	Timers or RTCs		.5 mm	S-PDSO-N10	1	Not Qualified	YES
PCF85263ATT/AJ	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL(I2C)	5.5 V	8				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	.9 V	85 Cel	-40 Cel		DUAL	1.1 mm	1	3 mm		0	.032768 MHz		260	3 mm	1	CMOS	.000885 mA	SECONDS	3.3 V			.65 mm	S-PDSO-G8	1		NO
PCF8523TS/1,112	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				1.2/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.2 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm			.032 MHz		260	5 mm	1	CMOS		SECONDS	3 V	Timer or RTC		.65 mm	R-PDSO-G14	1	Not Qualified	YES
MCP7940NT-I/MNY	Microchip Technology	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8	AEC-Q100		2/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20	Y	1.8 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	.8 mm	64	2 mm		0	.032 MHz	40	260	3 mm	1	CMOS	.4 mA	SECONDS	2.5 V	Timer or RTC		.5 mm	R-PDSO-N8	1	Not Qualified	YES	e4
M41T83SMY6F	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL(I2C)	5.5 V	8		8	3.3/5	SMALL OUTLINE	SOP8,.4	Y	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.69 mm	7	7.62 mm			.4 MHz	30	240	11.61 mm	1	CMOS	.15 mA	1/100 SECOND	5 V	Timers or RTCs		1.27 mm	R-PDSO-G18	1	Not Qualified	NO	e3
DS1390U-33	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.97 V	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	DUAL	1.1 mm		3 mm			.032 MHz	20	240	3 mm	1	CMOS		1/100 SECOND	3.3 V	Timer or RTC		.5 mm	S-PDSO-G10	1	Not Qualified	YES	e0
DS1390U-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3.3 V	Timers or RTCs		.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
PCF2129T/2	NXP Semiconductors	TIMER, MEMORY REFRESH	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	4.2 V					SMALL OUTLINE			1.8 V	85 Cel	-40 Cel		DUAL	2.65 mm		7.5 mm			.032 MHz			10.3 mm	1	CMOS			2 V			1.27 mm	R-PDSO-G16
RV-8803-C7TAQC	Micro Crystal Ag	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	SON	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE			1.5 V	85 Cel	-40 Cel	GOLD OVER NICKEL	DUAL	.8 mm		1.5 mm		0		40	260	3.2 mm		CMOS			3 V			.9 mm	R-PDSO-N8	1			e4
DS1683S+	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				3/5	SMALL OUTLINE	SOP8,.25	Y	2.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.4 MHz	30	260	4.9 mm		CMOS		SECONDS		Timers or RTCs		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
PCF2123TS/1,112	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				1.1/5.5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	Y	1.1 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.1 mm		4.4 mm			.032 MHz		260	5 mm	1	CMOS		SECONDS	1.6 V	Timers or RTCs		.65 mm	R-PDSO-G14	1	Not Qualified	YES	e4
PCF85063ATL/1	NXP Semiconductors	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V					SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.9 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	.5 mm		2.6 mm	ALSO OPERATES AT 1.8 V AT 400KHZ		.032 MHz	30	260	2.6 mm	1	CMOS			3.3 V			.5 mm	S-PDSO-N10	1			e4
M41T82SM6F	STMicroelectronics	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL(I2C)	5.5 V	8		8	3.3/5	SMALL OUTLINE	SOP8,.25	Y	3 V	85 Cel	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	1.75 mm	7	3.9 mm			.4 MHz	30	260	4.9 mm	1	CMOS	.15 mA	1/100 SECOND	5 V	Timers or RTCs		1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e4
DS1337	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	I2C	5.5 V				1.5/5	IN-LINE	DIP8,.3	Y	1.8 V	85 Cel	-40 Cel	TIN LEAD	DUAL	4.572 mm		7.62 mm			.032 MHz			9.375 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC		2.54 mm	R-PDIP-T8	1	Not Qualified	YES	e0
DS1337+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	I2C	5.5 V				1.5/5	IN-LINE	DIP8,.3	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	4.572 mm		7.62 mm			.032 MHz	30	260	9.375 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC		2.54 mm	R-PDIP-T8	1	Not Qualified	YES	e3
DS1302SN/T&R	Maxim Integrated	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3/5	SMALL OUTLINE	SOP8,.3	N	2 V	85 Cel	-40 Cel	TIN LEAD	DUAL	2.13 mm		5.285 mm	BURST MODE RAM DATA TRANSFER; TIMEKEEPING CURRENT = 0.3UA		.032 MHz			5.31 mm	0	CMOS		SECONDS	3.3 V	Timers or RTCs		1.27 mm	R-PDSO-G8	1	Not Qualified	YES	e0
DS1302SN+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				3/5	SMALL OUTLINE	SOP8,.3	N	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.13 mm		5.285 mm	BURST MODE RAM DATA TRANSFER; TIMEKEEPING CURRENT = 0.3UA		.032 MHz	30	260	5.31 mm	0	CMOS		SECONDS	3.3 V	Timer or RTC		1.27 mm	R-PDSO-G8	1	Not Qualified	YES	e3
IS82C54-10Z	Renesas Electronics	TIMER, PROGRAMMABLE	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	PARALLEL, DIRECT ADDRESS	5.5 V			16		CHIP CARRIER			4.5 V	85 Cel	-40 Cel	MATTE TIN	QUAD	4.57 mm		11.505 mm		8	10 MHz	30	245	11.505 mm	3	CMOS			5 V			1.27 mm	S-PQCC-J28	3	Not Qualified		e3

Timers & Real-Time Clocks

Timers and real-time clocks (RTCs) are electronic devices that are used to measure and track time intervals in electronic systems. They are crucial components in many applications, such as control systems, automation systems, and consumer electronics.

A timer is an electronic device that is used to measure the duration of time intervals. Timers can be either digital or analog and can be used to measure time intervals ranging from microseconds to hours or even days. They can be used for a variety of applications, such as controlling the duration of a signal or triggering an event after a specified time interval.

A real-time clock (RTC) is a clock that keeps track of the current time and date. Unlike a timer, an RTC is capable of keeping track of time even when the system is powered off. RTCs are commonly used in consumer electronics such as watches, clocks, and digital cameras, as well as in control systems, data loggers, and other applications that require accurate timekeeping.