Analog Devices Timers & Real-Time Clocks 514

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Information Access Method	Maximum Supply Voltage	On Chip Data RAM Width	Screening Level	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Interrupt Capability	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	RAM Words	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	No. of Timers	Technology	Maximum Supply Current	Minimum Time	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Volatile	JESD-609 Code
DS1340Z-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE	SOP8,.25	N	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz	30	260	4.9 mm		CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1337C#	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			1.5/5	SMALL OUTLINE	SOP16,.4	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm		7.5 mm			.032 MHz	30	260	10.3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G16	1	Not Qualified	YES	e3
DS1337U+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			1.5/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	YES	e3
DS1683S+T&R	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3/5	SMALL OUTLINE	SOP8,.25	Y	2.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.4 MHz	30	260	4.9 mm		CMOS		SECONDS		Timers or RTCs	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1302S+T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE	SOP8,.3	N	2 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	2.13 mm		5.285 mm	BURST MODE RAM DATA TRANSFER; TIMEKEEPING CURRENT = 0.3UA		.032 MHz	30	260	5.31 mm	0	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G8	1	Not Qualified	YES	e3
DS1305EN+T&R/C01	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2 V	85 Cel	-40 Cel		DUAL	1.1 mm		4.4 mm						6.5 mm		CMOS			5 V		.65 mm	R-PDSO-G20	1
DS12887A+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	5.5 V			5	IN-LINE	DIP24,.6	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm		15.24 mm		8	.032 MHz			33.782 mm	1	CMOS		SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e3
DS1302S+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE	SOP8,.3	N	2 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	2.13 mm		5.285 mm	BURST MODE RAM DATA TRANSFER; TIMEKEEPING CURRENT = 0.3UA		.032 MHz	30	260	5.31 mm	0	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G8	1	Not Qualified	YES	e3
DS1390U-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3.3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
DS1683S+	Analog Devices	TIMER, PROGRAMMABLE	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3/5	SMALL OUTLINE	SOP8,.25	Y	2.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.4 MHz	30	260	4.9 mm		CMOS		SECONDS		Timers or RTCs	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1337+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	I2C	5.5 V			1.5/5	IN-LINE	DIP8,.3	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	4.572 mm		7.62 mm			.032 MHz	30	260	9.375 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	2.54 mm	R-PDIP-T8	1	Not Qualified	YES	e3
DS3232S#	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE	SOP20,.4	Y	2.3 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm		7.5 mm		0	.032 MHz			12.8 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G20	1	Not Qualified	NO	e3
DS1302SN+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE	SOP8,.3	N	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.13 mm		5.285 mm	BURST MODE RAM DATA TRANSFER; TIMEKEEPING CURRENT = 0.3UA		.032 MHz	30	260	5.31 mm	0	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G8	1	Not Qualified	YES	e3
DS1388Z-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.63 V			3.3	SMALL OUTLINE	SOP8,.25	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.91 mm			.032 MHz	30	260	4.88 mm		CMOS		1/100 SECOND	3.3 V	Timers or RTCs	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1302N+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	SERIAL, 3-WIRE	5.5 V			3/5	IN-LINE	DIP8,.3	N	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	4.572 mm		7.62 mm	BURST MODE RAM DATA TRANSFER; TIMEKEEPING CURRENT = 0.3UA		.032 MHz	30	260	9.375 mm	0	CMOS		SECONDS	3.3 V	Timer or RTC	2.54 mm	R-PDIP-T8	1	Not Qualified	YES	e3
DS1338Z-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3	SMALL OUTLINE	SOP8,.25	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm		0	.032 MHz	30	260	4.9 mm	1	CMOS		SECONDS	3 V	Timer or RTC	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS3232S#T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE	SOP20,.4	Y	2.3 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm		7.5 mm		0	.032 MHz			12.8 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G20	1	Not Qualified	NO	e3
DS1338U-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	3.63 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1337S+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			1.5/5	SMALL OUTLINE	SOP8,.25	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz	30	260	4.9 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G8	1	Not Qualified	YES	e3
DS2413P+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	C BEND	6	SOC	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 1-WIRE	5.25 V				SMALL OUTLINE			2.8 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.5 mm		3.81 mm		0		30	260	3.937 mm	1	CMOS			3.3 V		1.27 mm	R-PDSO-C6	1	Not Qualified		e3
DS1339C-33T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE	SOP16,.4	Y	2.97 V	85 Cel	-40 Cel	MATTE TIN	DUAL	2.67 mm		7.495 mm			.032 MHz			10.285 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G16	1	Not Qualified	NO	e3
DS1339C-33#T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				SMALL OUTLINE			2.97 V	85 Cel	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm			.032 MHz	30	260	10.3 mm	1	CMOS			3.3 V		1.27 mm	R-PDSO-G16				e3
DS1302+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	SERIAL, 3-WIRE	5.5 V			3/5	IN-LINE	DIP8,.3	N	2 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	4.572 mm		7.62 mm	BURST MODE RAM DATA TRANSFER; TIMEKEEPING CURRENT = 0.3UA		.032 MHz	30	260	9.375 mm	0	CMOS		SECONDS	3.3 V	Timer or RTC	2.54 mm	R-PDIP-T8	1	Not Qualified	YES	e3
DS2413P+T&R	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	C BEND	6	SOC	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 1-WIRE	5.25 V				SMALL OUTLINE			2.8 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.5 mm		3.81 mm		0		30	260	3.937 mm	1	CMOS			3.3 V		1.27 mm	R-PDSO-C6	1	Not Qualified		e3
DS3232SN#-W	Analog Devices	TIMER, REAL TIME CLOCK		GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V	8			SMALL OUTLINE	SOP20,.4	Y	2.3 V	85 Cel	-40 Cel		DUAL	2.65 mm	236	7.5 mm		0	.032 MHz			12.8 mm	1	CMOS	.325 mA	SECONDS	3.3 V		1.27 mm	R-PDSO-G20			NO
DS1375T+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	6	SON	RECTANGULAR	UNSPECIFIED	YES	I2C	5.5 V			1.8/5	SMALL OUTLINE	SOLCC6,.11,37	Y	1.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL						.032 MHz	30	260		1	CMOS		SECONDS	3.3 V	Timer or RTC	.95 mm	R-XDSO-N6	1	Not Qualified	YES	e3
DS1338U-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	N	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm		0	.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS12887+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	5.5 V			5	IN-LINE	DIP24,.6	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm		15.24 mm	DAYLIGHT SAVINGS OPTION; SELECTABLE MOTOROLA/INTEL TIMING; 10 YEARS DATA RETENTION	8	.032 MHz			33.782 mm	1	CMOS		SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e3
DS1338Z-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V			3	SMALL OUTLINE	SOP8,.25	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.91 mm			.032 MHz	30	260	4.88 mm	1	CMOS		SECONDS	3 V	Timer or RTC	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1340C-33#T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE	SOP16,.4	N	2.97 V	85 Cel	-40 Cel		DUAL	2.65 mm		7.5 mm				30	260	10.3 mm		CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G16	1	Not Qualified	NO
DS1511W+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	3.6 V			3.3	IN-LINE	DIP28,.6	Y	3 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm		15.24 mm		8	.032 MHz			38.862 mm	1	CMOS		SECONDS	3.3 V	Timers or RTCs	2.54 mm	R-PDIP-T28		Not Qualified	YES	e3
DS1390U-33/V+T	Analog Devices		INDUSTRIAL	GULL WING	10	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 4 WIRE/SPI			AEC-Q100	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y		85 Cel	-40 Cel	MATTE TIN	DUAL							30	260			CMOS		1/100 SECOND	3.3 V	Timers or RTCs	.5 mm	R-PDSO-G10	1	Not Qualified	NO	e3
DS1306N+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	SERIAL, 3-WIRE	5.5 V			3/5	IN-LINE	DIP16,.3	Y	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	4.572 mm		7.62 mm		0	.032 MHz	30	260	19.175 mm	0	CMOS		SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T16	1	Not Qualified	YES	e3
DS1391U-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.3 V			3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		1/100 SECOND	3 V	Timers or RTCs	.5 mm	S-PDSO-G10	1	Not Qualified	NO	e3
DS2413P+T	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	C BEND	6	SOC	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 1-WIRE	5.25 V				SMALL OUTLINE			2.8 V	70 Cel	0 Cel		DUAL	1.5 mm		3.81 mm		0		30	260	3.937 mm		CMOS			3.3 V		1.27 mm	R-PDSO-C6		Not Qualified
DS1371U+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 2-WIRE/I2C	5.5 V			1.8/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm			.032 MHz	30	260	3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified		e3
DS1337C#T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			1.5/5	SMALL OUTLINE	SOP16,.4	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm		7.5 mm			.032 MHz	30	260	10.3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G16	1	Not Qualified	YES	e3
DS1306EN+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1340C-33#	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V				SMALL OUTLINE			2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm		7.5 mm			.032 MHz	30	260	10.3 mm		CMOS			3.3 V		1.27 mm	R-PDSO-G16	1	Not Qualified		e3
DS1306EN+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1339C-33#	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	5.5 V			3.3	SMALL OUTLINE	SOP16,.4	Y	2.97 V	85 Cel	-40 Cel	MATTE TIN	DUAL	2.65 mm		7.5 mm			.032 MHz	30	260	10.3 mm	1	CMOS		SECONDS	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G16		Not Qualified	NO	e3
DS1340Z-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V			3	SMALL OUTLINE	SOP8,.25	N	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz	30	260	4.9 mm		CMOS		SECONDS	3 V	Timer or RTC	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS12C887+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	5.5 V			5	IN-LINE	DIP24,.6	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm		15.24 mm		8	.032 MHz			33.782 mm	1	CMOS		SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e3
DS1306E+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1388Z-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V			3	SMALL OUTLINE	SOP8,.25	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm		3.9 mm			.032 MHz	30	260	4.9 mm		CMOS		1/100 SECOND	3 V	Timers or RTCs	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
MAX31341CETB+T	Analog Devices	TIMER, REAL TIME CLOCK																			Matte Tin (Sn) - annealed								30	260										1			e3
MAX16998AAUA+	Analog Devices	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		40 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			5 V	125 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		3 mm				30	260	3 mm	1	BICMOS			14 V		.65 mm	S-PDSO-G8	1	Not Qualified		e3
DS1305E+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm		4.4 mm		0	.032 MHz	30	260	6.5 mm	0	CMOS		SECONDS	5 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3

Timers & Real-Time Clocks

Timers and real-time clocks (RTCs) are electronic devices that are used to measure and track time intervals in electronic systems. They are crucial components in many applications, such as control systems, automation systems, and consumer electronics.

A timer is an electronic device that is used to measure the duration of time intervals. Timers can be either digital or analog and can be used to measure time intervals ranging from microseconds to hours or even days. They can be used for a variety of applications, such as controlling the duration of a signal or triggering an event after a specified time interval.

A real-time clock (RTC) is a clock that keeps track of the current time and date. Unlike a timer, an RTC is capable of keeping track of time even when the system is powered off. RTCs are commonly used in consumer electronics such as watches, clocks, and digital cameras, as well as in control systems, data loggers, and other applications that require accurate timekeeping.