Analog Devices Timers & Real-Time Clocks 514

Reset All

Part	Manufacturer	Peripheral IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Information Access Method	Maximum Supply Voltage	No. of Bits	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Interrupt Capability	Minimum Supply Voltage	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Maximum Seated Height	Width	Additional Features	External Data Bus Width	Maximum Clock Frequency	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	No. of Timers	Technology	Minimum Time	Nominal Supply Voltage	Sub-Category	Terminal Pitch	JESD-30 Code	Moisture Sensitivity Level (MSL)	Qualification	Volatile	JESD-609 Code
DS1385S	Analog Devices		COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL			5	SMALL OUTLINE	SOP28,.5	Y		70 Cel	0 Cel	TIN LEAD	DUAL										CMOS	SECONDS	5 V	Timer or RTC	1.27 mm	R-PDSO-G28		Not Qualified	YES	e0
DS1343D-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	14	HVSON	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V		3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC14,.12,16	Y	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm	3 mm			4 MHz	30	260	3 mm	1	CMOS	SECONDS	3.3 V	Timers or RTCs	.4 mm	S-PDSO-N14	1	Not Qualified	NO	e3
DS1554W-120IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	32	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	IN-LINE	DIP32,.6	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	10.922 mm	15.24 mm		8	.032 MHz			43.053 mm		CMOS	SECONDS	3.3 V	Timer or RTC	2.54 mm	R-PDIP-T32		Not Qualified	NO	e3
DS1687-32	Analog Devices	TIMER, REAL TIME CLOCK		THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS				IN-LINE						TIN LEAD	DUAL	5.72 mm	15.24 mm	ALSO OPERATES AT 5V SUPPLY	8					1	CMOS		3 V		2.54 mm	R-PDIP-T28		Not Qualified		e0
DS17885S-3+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	3.7 V		3	SMALL OUTLINE	SOP24,.4	Y	2.7 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	2.67 mm	7.5 mm		8	.032 MHz	30	260	17.9 mm	1	CMOS	SECONDS	3 V	Timer or RTC	1.27 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1343E-33+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm				30	260	6.5 mm	1	CMOS		3.3 V		.65 mm	R-PDSO-G20	1			e3
DS17487-5IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	5.5 V		5	IN-LINE	DIP24,.6	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm	15.24 mm		8	.032 MHz			33.782 mm	1	CMOS	SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T24	1	Not Qualified	NO	e3
DS1556W	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	PIN/PEG	32	DIP	RECTANGULAR	UNSPECIFIED	NO	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	MICROELECTRONIC ASSEMBLY	DIP32,.6	Y	2.97 V	70 Cel	0 Cel	TIN LEAD	DUAL				8	.032 MHz					CMOS	SECONDS	3.3 V	Timer or RTC	2.54 mm	R-XDMA-P32		Not Qualified	NO	e0
DS1685EN-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	3.7 V		3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm		8	.032 MHz	30	260	7.8 mm	1	CMOS	SECONDS	3 V	Timer or RTC	.65 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1673E-3+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.3 V		3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2.7 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm	3-CHANNEL, 8-BIT ADC	1	.032 MHz	30	260	6.5 mm	0	MOS	SECONDS	3 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1343D-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	14	HVSON	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm	3 mm				30	260	3 mm	1	CMOS		3 V		.4 mm	S-PDSO-N14	1			e3
DS12885/TR	Analog Devices
DS1339U-2+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	I2C	2.2 V		2	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	3 mm			.032 MHz	30	260	3 mm	1	CMOS	SECONDS	2 V	Timer or RTC	.65 mm	S-PDSO-G8	1	Not Qualified	NO	e3
DS1556W-120IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	PIN/PEG	32	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	MICROELECTRONIC ASSEMBLY	DIP32,.6	Y	2.97 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	10.922 mm	15.24 mm		8	.032 MHz			43.053 mm		CMOS	SECONDS	3.3 V	Timer or RTC	2.54 mm	R-PDMA-P32		Not Qualified	NO	e3
DS1347T+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 4 WIRE/SPI	5.5 V	8	2.5/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Y	2 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm	3 mm		0	.032 MHz	30	260	3 mm		CMOS	SECONDS	3.3 V	Timer or RTC	.65 mm	S-PDSO-N8	1	Not Qualified	YES	e3
DS1244PP-100	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	J INVERTED	34		RECTANGULAR	UNSPECIFIED	YES	PARALLEL, DIRECT ADDRESS	5.5 V			MICROELECTRONIC ASSEMBLY			4.5 V	70 Cel	0 Cel	TIN LEAD	DUAL				8					0	CMOS		5 V			R-XDMA-U34		Not Qualified		e0
DS1388Z-3+TR	Analog Devices		INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	I2C	3.3 V		3	SMALL OUTLINE	SOP8,.25	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.75 mm	3.9 mm			.032 MHz			4.9 mm		CMOS	1/100 SECOND	3 V	Timers or RTCs	1.27 mm	R-PDSO-G8	1	Not Qualified	NO	e3
DS1556P-70IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	J INVERTED	34		RECTANGULAR	UNSPECIFIED	YES	PARALLEL, DIRECT ADDRESS	5.5 V		5	MICROELECTRONIC ASSEMBLY	MODULE,34LEAD,1.0	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL				8	.032 MHz					CMOS	SECONDS	5 V	Timer or RTC		R-XDMA-U34		Not Qualified	NO	e3
DS1744W-120+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	IN-LINE	DIP32,.6	N	2.97 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	10.668 mm	15.24 mm		8	.032 MHz			38.227 mm	0	CMOS	SECONDS	3.3 V	Timer or RTC	2.54 mm	R-PDIP-T28		Not Qualified	NO	e3
MAX16998DAUA+	Analog Devices	TIMER, PROGRAMMABLE	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		40 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			5 V	125 Cel	-40 Cel		DUAL	1.1 mm	3 mm						3 mm	1	BICMOS		14 V		.65 mm	S-PDSO-G8	1	Not Qualified
DS1342T+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	I2C	5.5 V		2/5	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Y	1.8 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm	3 mm		0	.032 MHz	30	260	3 mm	1	CMOS	SECONDS	3 V	Timer or RTC	.65 mm	S-PDSO-N8	1	Not Qualified	YES	e3
DS17487-3IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	3.7 V		3	IN-LINE	DIP24,.6	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	9.398 mm	15.24 mm		8	.032 MHz			33.782 mm	1	CMOS	SECONDS	3 V	Timer or RTC	2.54 mm	R-PDIP-T24		Not Qualified	NO	e3
DS1248-100	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	32		RECTANGULAR	UNSPECIFIED	NO	PARALLEL, DIRECT ADDRESS	5.5 V			MICROELECTRONIC ASSEMBLY			4.5 V	70 Cel	0 Cel	TIN LEAD	DUAL				8	10 MHz					CMOS		5 V			R-XDMA-T32		Not Qualified		e0
DS1344E-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm				30	260	6.5 mm	1	CMOS		3 V		.65 mm	R-PDSO-G20	1			e3
DS1744-70IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	5.5 V		5	IN-LINE	DIP32,.6	N	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	10.668 mm	15.24 mm		8	.032 MHz			38.227 mm	0	CMOS	SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T28		Not Qualified	NO	e3
DS17885EN-5	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	28	TSOP1	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	5.5 V		5	SMALL OUTLINE, THIN PROFILE	TSSOP28,.53,22	Y	4.5 V	85 Cel	-40 Cel	TIN LEAD	DUAL	1.2 mm	8 mm		8	.032 MHz			11.8 mm	1	CMOS	SECONDS	5 V	Timer or RTC	.55 mm	R-PDSO-G28		Not Qualified	NO	e0
DS1315S-33+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, FIXED PROTOCOL	3.6 V		3.3	SMALL OUTLINE	SOP16,.4	N	3 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	7.5 mm		0	.032 MHz	30	260	10.3 mm	0	CMOS	1/100 SECOND	3.3 V	Timer or RTC	1.27 mm	R-PDSO-G16	1	Not Qualified	YES	e3
DS1344D-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	14	HVSON	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm	3 mm				30	260	3 mm	1	CMOS		3 V		.4 mm	S-PDSO-N14	1			e3
DS1315EN-5V	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, FIXED PROTOCOL			5	SMALL OUTLINE	TSSOP20,.25	N		85 Cel	-45 Cel	TIN LEAD	DUAL									0	CMOS	1/100 SECOND	5 V	Timer or RTC	.635 mm	R-PDSO-G20	1	Not Qualified	YES	e0
DS1248Y-70+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	PIN/PEG	32	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	5.5 V		5	IN-LINE	DIP32,.6	N	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	10.922 mm	15.24 mm		8		30	260	43.053 mm		CMOS	1/100 SECOND	5 V	Timer or RTC	2.54 mm	R-PDIP-P32	1	Not Qualified	NO	e3
DS1554P-70IND+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	J INVERTED	34		RECTANGULAR	UNSPECIFIED	YES	PARALLEL, DIRECT ADDRESS	5.5 V		5	MICROELECTRONIC ASSEMBLY	MODULE,34LEAD,1.0	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.3368 mm	23.495 mm		8	.032 MHz			25.019 mm		CMOS	SECONDS	5 V	Timer or RTC	1.27 mm	R-XDMA-U34		Not Qualified	NO	e3
DS12885+	Analog Devices	TIMER, PROGRAMMABLE	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, MUXED BUS	5.5 V		5	IN-LINE	DIP24,.6	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	5.08 mm	15.24 mm	DAYLIGHT SAVINGS OPTION; SELECTABLE MOTOROLA/INTEL TIMING	8	.032 MHz	30	260	31.75 mm	1	CMOS	SECONDS	5 V	Timer or RTC	2.54 mm	R-PDIP-T24	1	Not Qualified	YES	e3
DS17285S-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	3.3 V		3	SMALL OUTLINE	SOP24,.4	Y	2.7 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	2.68 mm	7.5 mm		8	.032 MHz	30	260	17.9 mm	1	CMOS	SECONDS	3 V	Timer or RTC	1.27 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1673E-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	3.3 V		3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	Y	2.7 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm	3-CHANNEL, 8-BIT ADC	1	.032 MHz	30	260	6.5 mm	0	MOS	SECONDS	3 V	Timer or RTC	.65 mm	R-PDSO-G20	1	Not Qualified	YES	e3
DS1643L-12	Analog Devices		COMMERCIAL		26			PLASTIC/EPOXY		PARALLEL			5	MICROELECTRONIC ASSEMBLY	MODULE,26LEAD,.80	N		70 Cel	0 Cel												CMOS	SECONDS	5 V	Timer or RTC				Not Qualified	NO
DS1685SN-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	3.7 V		3	SMALL OUTLINE	SOP24,.4		2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	7.5 mm		8	.032 MHz	30	260	15.4 mm	1	CMOS	SECONDS	3 V	Timer or RTC	1.27 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1746P-70+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	J INVERTED	34		RECTANGULAR	UNSPECIFIED	YES	PARALLEL, DIRECT ADDRESS	5.5 V		5	MICROELECTRONIC ASSEMBLY	MODULE,34LEAD,1.0	N	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	2.3368 mm	23.495 mm		8	.032 MHz			25.019 mm		CMOS	SECONDS	5 V	Timers or RTCs	1.27 mm	R-XDMA-U34	1	Not Qualified	NO	e3
DS16440-120	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	UNSPECIFIED	NO	PARALLEL, DIRECT ADDRESS	5.5 V			IN-LINE			4.5 V	70 Cel	0 Cel	TIN LEAD	DUAL	9.27 mm	15.24 mm		8	.032 MHz			37.595 mm		CMOS		5 V		2.54 mm	R-XDIP-T28		Not Qualified		e0
MAX16997AAUA+T	Analog Devices				8			PLASTIC/EPOXY						SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						Matte Tin (Sn) - annealed	DUAL						30	260		1	CMOS						1			e3
DS1685S-5+T&R	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	5.5 V		5	SMALL OUTLINE	SOP20,.4	Y	4.5 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	7.5 mm		8	.032 MHz	30	260	15.4 mm	1	CMOS	SECONDS	5 V	Timer or RTC	1.27 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1685SN-5+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	5.5 V		5	SMALL OUTLINE	SOP24,.4		4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	7.5 mm		8	.032 MHz	30	260	15.4 mm	1	CMOS	SECONDS	5 V	Timer or RTC	1.27 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1746W-120+	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	32	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	PARALLEL, DIRECT ADDRESS	3.63 V		3.3	IN-LINE	DIP32,.6	N	2.97 V	70 Cel	0 Cel	Matte Tin (Sn) - annealed	DUAL	10.922 mm	15.24 mm		8	.032 MHz			43.053 mm		CMOS	SECONDS	3.3 V	Timers or RTCs	2.54 mm	R-PDIP-T32	1	Not Qualified	NO	e3
DS1685SN-5+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	5.5 V		5	SMALL OUTLINE	SOP20,.4	Y	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	7.5 mm		8	.032 MHz	30	260	15.4 mm	1	CMOS	SECONDS	5 V	Timer or RTC	1.27 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1315SN-5+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	SERIAL, FIXED PROTOCOL	5.5 V		5	SMALL OUTLINE	SOP16,.4	N	4.5 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.65 mm	7.5 mm		0	.032 MHz	30	260	10.3 mm	0	CMOS	1/100 SECOND	5 V	Timer or RTC	1.27 mm	R-PDSO-G16	1	Not Qualified	YES	e3
DS1344D-33+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	NO LEAD	14	HVSON	SQUARE	PLASTIC/EPOXY	YES	SERIAL, 3-WIRE	5.5 V		3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC14,.12,16	Y	3 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	.8 mm	3 mm			4 MHz	30	260	3 mm	1	CMOS	SECONDS	3.3 V	Timers or RTCs	.4 mm	S-PDSO-N14	1	Not Qualified	NO	e3
DS1747	Analog Devices	TIMER, REAL TIME CLOCK	COMMERCIAL	THROUGH-HOLE	32	DIP	RECTANGULAR	UNSPECIFIED	NO	PARALLEL, DIRECT ADDRESS	5.5 V		5	MICROELECTRONIC ASSEMBLY	DIP32,.6	N	4.5 V	70 Cel	0 Cel	TIN LEAD	DUAL				8	.032 MHz				0	CMOS	SECONDS	5 V	Timer or RTC	2.54 mm	R-XDMA-T32		Not Qualified	NO	e0
DS17285SN-3+	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	3.7 V		3	SMALL OUTLINE	SOP24,.4	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	2.67 mm	7.5 mm		8	.032 MHz	30	260	17.9 mm	1	CMOS	SECONDS	3 V	Timer or RTC	1.27 mm	R-PDSO-G24	1	Not Qualified	YES	e3
DS1685EN-3+T&R	Analog Devices	TIMER, REAL TIME CLOCK	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	PARALLEL, MUXED BUS	3.7 V		3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	Y	2.7 V	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	DUAL	1.1 mm	4.4 mm		8	.032 MHz	30	260	7.8 mm	1	CMOS	SECONDS	3 V	Timer or RTC	.65 mm	R-PDSO-G24	1	Not Qualified	YES	e3

Timers & Real-Time Clocks

Timers and real-time clocks (RTCs) are electronic devices that are used to measure and track time intervals in electronic systems. They are crucial components in many applications, such as control systems, automation systems, and consumer electronics.

A timer is an electronic device that is used to measure the duration of time intervals. Timers can be either digital or analog and can be used to measure time intervals ranging from microseconds to hours or even days. They can be used for a variety of applications, such as controlling the duration of a signal or triggering an event after a specified time interval.

A real-time clock (RTC) is a clock that keeps track of the current time and date. Unlike a timer, an RTC is capable of keeping track of time even when the system is powered off. RTCs are commonly used in consumer electronics such as watches, clocks, and digital cameras, as well as in control systems, data loggers, and other applications that require accurate timekeeping.