TO-263 Adjustable Regulators - Negative Single Output LDO 12

  1. Home
  2. Adjustable Regulators - Negative Single Output LDO
Manufacturers
    • Analog Devices
    • Linear Technology
    • Micrel
    • Microchip Technology
    • Renesas Electronics
    • STMicroelectronics
    • Texas Instruments
Regulator Type
    • ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR
No. of Terminals
    • 10
    • 11
    • 12
    • 14
    • 16
    • 20
    • 28
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
Package Code (1)
    • TO-263
    • BCC
    • DFP
    • DIE
    • DIP
    • HTSSOP
    • HVQCCN
    • HVSON
    • LSOP
    • LSSOP
    • SFM
    • SOP
    • TO-220
    • TSSOP
    • VSSOP
    • ZFM
    • ZIP
Terminal Form
    • BUTT
    • FLAT
    • GULL WING
    • NO LEAD
    • PIN/PEG
    • THROUGH-HOLE
    • WIRE
Maximum Voltage Tolerance
    • 2 %
    • 2.5 %
    • 5 %
Total Dose (V)
    • 100k Rad(Si)
    • 200k Rad(Si)
    • 300k Rad(Si)
    • 30k Rad(Si)
Package Body Material
    • CERAMIC
    • CERAMIC, GLASS-SEALED
    • CERAMIC, METAL-SEALED COFIRED
    • METAL
    • PLASTIC/EPOXY
    • UNSPECIFIED
Maximum Dropout Voltage-1
    • .22 V
    • .36 V
    • .41 V
    • .42 V
    • .45 V
    • .49 V
    • .5 V
    • .6 V
    • .68 V
    • .7 V
    • .8 V
    • .9 V
    • 1 V
    • 1.05 V
Surface Mount
    • NO
    • YES
Operating Temperature (TJ-Max)
    • 125 Cel
    • 150 Cel
    • 70 Cel
    • 85 Cel
Maximum Input-Output Voltage Differential
    • 20 V
    • 25 V
    • 28 V
No. of Functions
    • 1
Technology
    • BCDMOS
    • BICMOS
    • BIPOLAR
    • CMOS
Screening Level
    • 38535V;38534K;883S
    • AEC-Q100
    • MIL-PRF-38535 Class Q
    • MIL-PRF-38535 Class V
    • MIL-STD-883
Package Shape
    • RECTANGULAR
    • ROUND
    • SQUARE
    • UNSPECIFIED
Operating Temperature (TJ-Min)
    • -40 Cel
    • -55 Cel
    • 0 Cel
Packing Method
    • TR
    • TUBE
Minimum Output Voltage-1
    • -1.2 V
    • .5 V
    • 0 V
    • 1.18 V
    • 1.182 V
    • 1.2 V
    • 1.22 V
    • 1.25 V
    • 15.5 V
    • 2 V
    • 2.25 V
    • 2.45 V
    • 2.5 V
    • 2.7 V
    • 3 V
Nominal Output Voltage-1
    • 2.5 V
Package Style (Meter)
    • CHIP CARRIER
    • CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
    • FLANGE MOUNT
    • FLATPACK
    • IN-LINE
    • SMALL OUTLINE
    • SMALL OUTLINE, HEAT SINK/SLUG
    • SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
    • SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
    • SMALL OUTLINE, LOW PROFILE
    • SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
    • SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
    • SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH
    • UNCASED CHIP
Package Equivalence Code
    • DIE OR CHIP
    • DILCC4,.55,150
    • DIP8,.3
    • FL16,.3
    • LCC20,.20SQ,25
    • LCC5(UNSPEC)
    • SIP5,.1,67TB
    • SIP7,.1,50TB
    • SMSIP5H,.6,67TB
    • SOLCC12,.12,18
    • SOLCC14,.12,20
    • SOLCC8,.079,20
    • SOP16,.4
    • SOP8,.25
    • TSOP5/6,.11,37
    • TSSOP12,.19
    • TSSOP16,.25
    • TSSOP8,.19
    • ZIP5,.15,.17,67TB
    • ZIP7,.15,.2,67TB
Maximum Line Regulation (%/V)
    • .008
    • .015
    • .02
    • .04
    • .046
    • .05
    • .057
    • .2
    • .3
Sub-Category
    • Other Regulators
Adjustability
    • ADJUSTABLE
Terminal Pitch
    • .45 mm
    • .5 mm
    • .65 mm
    • .95 mm
    • 1.27 mm
    • 1.7 mm
    • 1.702 mm
    • 2.54 mm
Maximum Operating Temperature
    • 125 Cel
    • 70 Cel
    • 85 Cel
Maximum Load Regulation (%)
    • .01 %
    • .17 %
    • .18 %
    • .25 %
    • .35 %
    • .4 %
    • .6 %
    • .75 %
    • .8 %
    • 1 %
    • 1.2 %
    • 2 %
Minimum Input-Output Voltage Differential
    • 1 V
    • 2.3 V
    • 2.8 V
Minimum Operating Temperature
    • -40 Cel
    • -55 Cel
    • 0 Cel
Terminal Finish
    • GOLD
    • Gold (Au)
    • MATTE TIN
    • MATTE TIN OVER NICKEL
    • Matte Tin (Sn)
    • Matte Tin (Sn) - annealed
    • Matte Tin (Sn) - with Nickel (Ni) barrier
    • NICKEL PALLADIUM GOLD
    • Nickel/Palladium/Gold (Ni/Pd/Au)
    • TIN LEAD
    • TIN LEAD OVER NICKEL
    • Tin/Lead (Sn/Pb)
    • Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier
Terminal Position
    • BOTTOM
    • DUAL
    • QUAD
    • SINGLE
    • UPPER
    • ZIG-ZAG
Maximum Output Voltage-1
    • -32 V
    • -9 V
    • 1.164 V
    • 1.2 V
    • 10 V
    • 14 V
    • 15 V
    • 18 V
    • 19.5 V
    • 20 V
    • 24 V
    • 25 V
    • 26 V
    • 29.5 V
    • 32 V
    • 33 V
    • 35 V
    • 6 V
    • 9.5 V
JESD-30 Code
    • O-MBFM-W3
    • O-XBFM-P4
    • R-CBCC-N5
    • R-CDFP-F16
    • R-CDFP-F28
    • R-CDIP-T8
    • R-CUUC-N12
    • R-GDSO-G16
    • R-PDIP-T8
    • R-PDSO-G12
    • R-PDSO-G16
    • R-PDSO-G5
    • R-PDSO-G8
    • R-PDSO-N14
    • R-PSFM-G5
    • R-PSFM-T5
    • R-PSFM-T7
    • R-PSSO-G5
    • R-PSSO-G7
    • R-PZFM-T5
    • R-PZFM-T7
    • R-XBCC-B5
    • R-XBCC-N5
    • R-XUUC-N11
    • R-XZFM-T5
    • S-PDSO-G8
    • S-PDSO-N10
    • S-PDSO-N12
    • S-PDSO-N6
    • S-PDSO-N8
    • S-PQCC-N20
    • X-XUUC-N
Moisture Sensitivity Level (MSL)
    • 1
    • 2
    • 3
Maximum Seated Height
    • .6 mm
    • .8 mm
    • 1 mm
    • 1.1 mm
    • 1.45 mm
    • 1.75 mm
    • 1.752 mm
    • 2.33 mm
    • 2.72 mm
    • 2.88 mm
    • 2.92 mm
    • 3.15 mm
    • 3.2258 mm
    • 3.3 mm
    • 3.937 mm
    • 4.572 mm
    • 4.7 mm
    • 4.775 mm
    • 4.8 mm
    • 4.877 mm
Width
    • 1.6 mm
    • 1.625 mm
    • 10.16 mm
    • 12.445 mm
    • 2 mm
    • 3 mm
    • 3.9 mm
    • 4.4 mm
    • 5 mm
    • 6.35 mm
    • 6.91 mm
    • 7.5 mm
    • 7.52 mm
    • 7.62 mm
    • 7.6454 mm
    • 8.5 mm
    • 8.51 mm
    • 8.64 mm
    • 8.89 mm
Qualification Status
    • Not Qualified
    • Qualified
Minimum Input Voltage
    • 10 V
    • 15 V
    • 16.5 V
    • 20 V
    • 26 V
    • 36 V
Maximum Output Current-1
    • .1 A
    • .2 A
    • .3 A
    • .5 A
    • .6 A
    • 1 A
    • 1.5 A
    • 3 A
JESD-609 Code
    • e0
    • e3
    • e4
Maximum Time At Peak Reflow Temperature (s)
    • 20
    • 30
    • 40
    • NOT SPECIFIED
No. of Outputs
    • 1
Peak Reflow Temperature (C)
    • 235
    • 245
    • 260
    • NOT SPECIFIED
Nominal Dropout Voltage-1
    • .13 V
    • .2 V
    • .216 V
    • .235 V
    • .25 V
    • .28 V
    • .29 V
    • .3 V
    • .325 V
    • .34 V
    • .36 V
    • .363 V
    • .5 V
    • .6 V
Length
    • 10.16 mm
    • 10.2 mm
    • 10.223 mm
    • 10.2235 mm
    • 13.84 mm
    • 13.97 mm
    • 14.986 mm
    • 2 mm
    • 2.9 mm
    • 2.91 mm
    • 3 mm
    • 4 mm
    • 4.039 mm
    • 4.89 mm
    • 4.9 mm
    • 5 mm
    • 9.91 mm
Maximum Input Voltage
    • -2.7 V
    • -3 V
    • .3 V
    • 2.7 V
    • 3 V
    • 3.2 V
Reset All
Part RoHS Manufacturer Regulator Type No. of Terminals Package Code Terminal Form Maximum Voltage Tolerance Total Dose (V) Package Body Material Maximum Dropout Voltage-1 Surface Mount Operating Temperature (TJ-Max) Maximum Input-Output Voltage Differential No. of Functions Technology Screening Level Package Shape Operating Temperature (TJ-Min) Packing Method Minimum Output Voltage-1 Nominal Output Voltage-1 Package Style (Meter) Package Equivalence Code Maximum Line Regulation (%/V) Sub-Category Adjustability Terminal Pitch Maximum Operating Temperature Maximum Load Regulation (%) Minimum Input-Output Voltage Differential Minimum Operating Temperature Terminal Finish Terminal Position Maximum Output Voltage-1 JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Status Minimum Input Voltage Maximum Output Current-1 JESD-609 Code Maximum Time At Peak Reflow Temperature (s) No. of Outputs Peak Reflow Temperature (C) Nominal Dropout Voltage-1 Length Maximum Input Voltage

LM2991S/NOPB

Texas Instruments

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

5 %

PLASTIC/EPOXY

1 V

YES

125 Cel

1

BIPOLAR

RECTANGULAR

-40 Cel

TUBE

2 V

SMALL OUTLINE

SMSIP5H,.6,67TB

.04

Other Regulators

ADJUSTABLE

1.7 mm

.4 %

MATTE TIN

SINGLE

25 V

R-PSSO-G5

3

4.8 mm

8.64 mm

Not Qualified

26 V

1 A

e3

30

1

245

.6 V

10.16 mm

.3 V

LM2991SX/NOPB

Texas Instruments

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

5 %

PLASTIC/EPOXY

1 V

YES

125 Cel

1

BIPOLAR

RECTANGULAR

-40 Cel

TR

2 V

SMALL OUTLINE

SMSIP5H,.6,67TB

.04

Other Regulators

ADJUSTABLE

1.7 mm

.4 %

MATTE TIN

SINGLE

25 V

R-PSSO-G5

3

4.8 mm

8.64 mm

Not Qualified

26 V

1 A

e3

30

1

245

.6 V

10.16 mm

.3 V

LM2991S

Texas Instruments

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

5 %

PLASTIC/EPOXY

1 V

YES

125 Cel

1

BIPOLAR

RECTANGULAR

-40 Cel

TUBE

2 V

SMALL OUTLINE

SMSIP5H,.6,67TB

.04

Other Regulators

ADJUSTABLE

1.7 mm

.4 %

TIN LEAD

SINGLE

25 V

R-PSSO-G5

3

4.8 mm

8.64 mm

Not Qualified

26 V

1 A

e0

20

1

235

.6 V

10.16 mm

.3 V

LM2991SX

Texas Instruments

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

5 %

PLASTIC/EPOXY

1 V

YES

125 Cel

1

BIPOLAR

RECTANGULAR

-40 Cel

TR

2 V

SMALL OUTLINE

SMSIP5H,.6,67TB

.04

Other Regulators

ADJUSTABLE

1.7 mm

.4 %

TIN LEAD

SINGLE

25 V

R-PSSO-G5

3

4.8 mm

8.64 mm

Not Qualified

26 V

1 A

e0

20

1

235

.6 V

10.16 mm

.3 V

LT1175CQ#PBF

Analog Devices

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

PLASTIC/EPOXY

.7 V

YES

125 Cel

20 V

1

RECTANGULAR

0 Cel

2 V

SMALL OUTLINE, HEAT SINK/SLUG

1.702 mm

1 V

MATTE TIN OVER NICKEL

SINGLE

10 V

R-PSSO-G5

1

4.877 mm

8.89 mm

Not Qualified

.5 A

e3

30

260

10.2235 mm

LT1175CQ#TRPBF

Analog Devices

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

PLASTIC/EPOXY

.7 V

YES

125 Cel

20 V

1

RECTANGULAR

0 Cel

TR

2 V

SMALL OUTLINE, HEAT SINK/SLUG

1.702 mm

1 V

MATTE TIN OVER NICKEL

SINGLE

10 V

R-PSSO-G5

1

4.877 mm

8.89 mm

Not Qualified

.5 A

e3

30

260

10.2235 mm

LT1175CQ#TR

Analog Devices

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

PLASTIC/EPOXY

.7 V

YES

125 Cel

20 V

1

RECTANGULAR

0 Cel

TR

2 V

SMALL OUTLINE, HEAT SINK/SLUG

1.702 mm

1 V

TIN LEAD OVER NICKEL

SINGLE

10 V

R-PSSO-G5

1

4.877 mm

8.89 mm

Not Qualified

.5 A

e0

10.2235 mm

LT1175IQ#PBF

Analog Devices

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

PLASTIC/EPOXY

.7 V

YES

125 Cel

20 V

1

RECTANGULAR

-40 Cel

2 V

SMALL OUTLINE, HEAT SINK/SLUG

1.702 mm

1 V

MATTE TIN OVER NICKEL

SINGLE

10 V

R-PSSO-G5

1

4.877 mm

8.89 mm

Not Qualified

.5 A

e3

30

260

10.2235 mm

LT1175CQ

Analog Devices

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

PLASTIC/EPOXY

.7 V

YES

125 Cel

20 V

1

RECTANGULAR

0 Cel

2 V

SMALL OUTLINE, HEAT SINK/SLUG

1.702 mm

1 V

Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier

SINGLE

10 V

R-PSSO-G5

1

4.877 mm

8.89 mm

Not Qualified

.5 A

e0

20

235

10.2235 mm

LT1175IQ

Analog Devices

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

PLASTIC/EPOXY

.7 V

YES

125 Cel

20 V

1

RECTANGULAR

-40 Cel

2 V

SMALL OUTLINE, HEAT SINK/SLUG

1.702 mm

1 V

TIN LEAD OVER NICKEL

SINGLE

10 V

R-PSSO-G5

1

4.877 mm

8.89 mm

Not Qualified

.5 A

e0

10.2235 mm

LT1175IQ#TR

Analog Devices

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

PLASTIC/EPOXY

.7 V

YES

125 Cel

20 V

1

RECTANGULAR

-40 Cel

TR

2 V

SMALL OUTLINE, HEAT SINK/SLUG

1.702 mm

1 V

TIN LEAD OVER NICKEL

SINGLE

10 V

R-PSSO-G5

4.877 mm

8.89 mm

Not Qualified

.5 A

e0

10.2235 mm

LT1175IQ#TRPBF

Analog Devices

ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR

5

TO-263

GULL WING

PLASTIC/EPOXY

.7 V

YES

125 Cel

20 V

1

RECTANGULAR

-40 Cel

TR

2 V

SMALL OUTLINE, HEAT SINK/SLUG

1.702 mm

1 V

MATTE TIN OVER NICKEL

SINGLE

10 V

R-PSSO-G5

1

4.877 mm

8.89 mm

Not Qualified

.5 A

e3

30

260

10.2235 mm

Adjustable Regulators - Negative Single Output LDO

Adjustable regulators, also known as variable regulators, are integrated circuits that provide a regulated output voltage that can be adjusted by the user. Negative single output LDO (Low Drop-Out) adjustable regulators are a type of adjustable regulator that provides a stable, negative voltage output that can be adjusted by an external resistor divider. They are often used in applications where a negative voltage supply is required and a high level of regulation is needed.

The LDO regulator is characterized by its low dropout voltage, which is the minimum voltage required for the regulator to function properly. This makes it a suitable choice for applications where the input voltage is close to the output voltage. The negative voltage output is achieved by an internal NPN pass transistor that operates in the linear region, allowing for a low dropout voltage.

These regulators also offer a high level of accuracy and low output noise, making them suitable for use in sensitive applications such as audio and data conversion circuits. In addition, they typically have a wide input voltage range and are designed to operate over a wide range of temperature conditions.