KEMET Corporation Non-linear Resistors 15

Reset All

Part	Manufacturer	Resistor Type	Mounting Type	Rated Power Dissipation (P)	Maximum Operating Temperature	Tolerance	Terminal Placement	Maximum Energy Absorbing Capacity	Packing Method	No. of Terminals	Package Style (Meter)	Terminal Shape	Minimum Operating Temperature	Terminal Finish	Height (Package)	Maximum Circuit RMS Voltage	Operating Voltage	Length (Package)	JESD-609 Code	Reference Standard	Width (Package)	Maximum Circuit DC Voltage
VP3225K401R275	KEMET Corporation	VARISTOR	SURFACE MOUNT	.1 W	85 Cel	10 %	DUAL ENDED	13 J	TR, 13 INCH	2	SMT	J BEND	-40 Cel		4.7 mm	275 V	350 V	8 mm			6.3 mm
VC1812K401R060	KEMET Corporation	VARISTOR	SURFACE MOUNT	.015 W	125 Cel		DUAL ENDED	5.8 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel	TIN OVER NICKEL	1.85 mm	60 V	85 V	4.7 mm	e3	AEC-Q200	3.2 mm	85 V
VC1206K201R025	KEMET Corporation	VARISTOR	SURFACE MOUNT	.008 W	125 Cel		DUAL ENDED	1 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel	TIN OVER NICKEL	1.25 mm	25 V	31 V	3.2 mm	e3	AEC-Q200	1.6 mm	31 V
VP3225K401R250	KEMET Corporation	VARISTOR	SURFACE MOUNT	.1 W	85 Cel	10 %	DUAL ENDED	11 J	TR, 13 INCH	2	SMT	J BEND	-40 Cel	Tin (Sn) - with Nickel (Ni) barrier	4.7 mm	250 V	320 V	8 mm	e3		6.3 mm
VP3225K401R300	KEMET Corporation	VARISTOR	SURFACE MOUNT	.1 W	85 Cel	10 %	DUAL ENDED	15 J	TR, 13 INCH	2	SMT	J BEND	-40 Cel	Tin (Sn) - with Nickel (Ni) barrier	4.7 mm	300 V	385 V	8 mm	e3		6.3 mm
VC0603K300R030	KEMET Corporation	VARISTOR	SURFACE MOUNT	.003 W	125 Cel		DUAL ENDED	.1 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel	TIN OVER NICKEL	.95 mm	30 V	38 V	1.6 mm	e3	AEC-Q200	.8 mm	38 V
VA1206K201R040	KEMET Corporation	VARISTOR	SURFACE MOUNT	.008 W	125 Cel	10 %	DUAL ENDED	2.2 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel		1.2 mm	40 V	56 V	3.2 mm		AEC-Q200	1.6 mm
VE1812K801R030	KEMET Corporation	VARISTOR	SURFACE MOUNT	.015 W	150 Cel	10 %	DUAL ENDED	4.4 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel	TIN OVER NICKEL	1.55 mm	30 V	38 V	4.7 mm	e3	AEC-Q200	3.2 mm	38 V
VA1206K201R030	KEMET Corporation	VARISTOR	SURFACE MOUNT	.008 W	125 Cel	10 %	DUAL ENDED	2 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel	Tin (Sn) - with Nickel (Ni) barrier	1.2 mm	30 V	34 V	3.2 mm	e3	AEC-Q200	1.6 mm
VE0805K121R030	KEMET Corporation	VARISTOR	SURFACE MOUNT	.005 W	150 Cel	10 %	DUAL ENDED	.2 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel	TIN OVER NICKEL	1.05 mm	30 V	38 V	2 mm	e3	AEC-Q200	1.25 mm	38 V
VE0805K121R014	KEMET Corporation	VARISTOR	SURFACE MOUNT	.005 W	150 Cel	10 %	DUAL ENDED	.4 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel	TIN OVER NICKEL	.8 mm	14 V	18 V	2 mm	e3	AEC-Q200	1.25 mm	18 V
VG0603S020R014	KEMET Corporation	VARISTOR	SURFACE MOUNT	.003 W	125 Cel		DUAL ENDED	.05 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel		.95 mm	14 V	18 V	1.6 mm		AEC-Q200	.8 mm
VC0805K121R020	KEMET Corporation	VARISTOR	SURFACE MOUNT	.005 W	125 Cel		DUAL ENDED	.4 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel	TIN OVER NICKEL	1.05 mm	20 V	26 V	2 mm	e3	AEC-Q200	1.25 mm	26 V
VP4032K122R275	KEMET Corporation	VARISTOR	SURFACE MOUNT	.25 W	85 Cel	10 %	DUAL ENDED	29 J	TR, 13 INCH	2	SMT	J BEND	-40 Cel		4.7 mm	275 V	350 V	10 mm			8 mm	350 V
VC0603K300R014	KEMET Corporation	VARISTOR	SURFACE MOUNT	.003 W	125 Cel		DUAL ENDED	.3 J	TR, 7 INCH	2	SMT	WRAPAROUND	-55 Cel	TIN OVER NICKEL	.95 mm	14 V	18 V	1.6 mm	e3	AEC-Q200	.8 mm	18 V

Non-linear Resistors

Non-linear resistors, also known as varistors or voltage-dependent resistors, are electronic components that exhibit a nonlinear resistance characteristic with respect to the applied voltage. They are primarily used for voltage clamping, surge protection, and transient suppression in electronic circuits.

The resistance of a varistor decreases with an increase in voltage, allowing it to provide a low resistance path for transient currents that exceed a specified threshold. When the voltage level drops below the threshold, the resistance increases, returning the varistor to its high impedance state. This property makes them useful for protecting sensitive electronic components from voltage surges and spikes.

Varistors are available in two types: metal oxide varistors (MOVs) and silicon carbide varistors (SiCVs). MOVs are the most common type, and they can handle a wider range of voltages than SiCVs. SiCVs, on the other hand, can handle higher temperatures and are more suitable for high power applications.

Non-linear resistors are widely used in power supplies, surge protectors, electronic ballasts, motor control circuits, and telecommunication systems. They are available in various package types, including through-hole, surface mount, and radial leaded packages.