Infineon Technologies RF/Microwave Mixers 21

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	Maximum Input Power (CW)	Maximum Supply Current	Construction	Power Supplies (V)	Package Equivalence Code	Characteristic Impedance	Sub-Category	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Maximum Conversion Loss	Additional Features	JESD-609 Code	Minimum Operating Frequency	Maximum Operating Frequency
CMY210	Infineon Technologies	DOUBLE BALANCED	SURFACE MOUNT	5	PLASTIC/EPOXY	GAAS	17 dBm		COMPONENT	3	TSOP5/6,.11,37	50 ohm	RF/Microwave Mixers				7 dB			500 MHz	2500 MHz
CMY210E6327	Infineon Technologies	DOUBLE BALANCED					10 dBm		COMPONENT			50 ohm								500 MHz	2500 MHz
CMY211	Infineon Technologies	DOUBLE BALANCED	SURFACE MOUNT	5	PLASTIC/EPOXY	GAAS	17 dBm		COMPONENT	3	TSOP5/6,.11,37	50 ohm	RF/Microwave Mixers			Tin/Lead (Sn/Pb)	7.5 dB		e0	500 MHz	2500 MHz
CMY91E6327	Infineon Technologies	DOUBLE BALANCED							COMPONENT											800 MHz	2500 MHz
CMY210E6433	Infineon Technologies	DOUBLE BALANCED					10 dBm		COMPONENT			50 ohm								500 MHz	2500 MHz
PMB2335	Infineon Technologies	TRIPLE BALANCED	SURFACE MOUNT	10	PLASTIC/EPOXY	BIPOLAR			COMPONENT	2.7/4.5	TSSOP10,.19,20	50 ohm	RF/Microwave Mixers	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)		LOW NOISE	e0		3000 MHz
TDA6130-5X4	Infineon Technologies	DOUBLE BALANCED	SURFACE MOUNT	14	PLASTIC/EPOXY	BIPOLAR		2.1 mA	COMPONENT	6	SOP14,.25		RF/Microwave Mixers	70 Cel	0 Cel	Tin/Lead (Sn/Pb)			e0
CMY91E6433	Infineon Technologies	DOUBLE BALANCED							COMPONENT											800 MHz	2500 MHz
24-27GHZMIXER	Infineon Technologies					GAAS					DIE OR CHIP		RF/Microwave Mixers
CMY211E6327	Infineon Technologies	DOUBLE BALANCED							COMPONENT			50 ohm								500 MHz	2500 MHz
PMB2330	Infineon Technologies		SURFACE MOUNT	8	PLASTIC/EPOXY	BIPOLAR				3/7	SOP8,.25		RF/Microwave Mixers	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)			e0
CMY90	Infineon Technologies		SURFACE MOUNT	7	PLASTIC/EPOXY	GAAS		2.5 mA		3.3/5	SO7,.28		RF/Microwave Mixers			Tin/Lead (Sn/Pb)			e0
TDA6131XS	Infineon Technologies	TRIPLE BALANCED	SURFACE MOUNT	16	PLASTIC/EPOXY	BIPOLAR		13.1 mA	COMPONENT	2.7/4.5	TSSOP16,.25		RF/Microwave Mixers	85 Cel	-40 Cel			LOW NOISE			3000 MHz
PMB2331	Infineon Technologies	TRIPLE BALANCED	SURFACE MOUNT	8	PLASTIC/EPOXY	BIPOLAR			COMPONENT	2.7/4.5	SOP8,.25	50 ohm	RF/Microwave Mixers	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)		LOW NOISE	e0		2000 MHz
PMB2210T	Infineon Technologies		SURFACE MOUNT	20	PLASTIC/EPOXY					5,5/7	SOP20,.4		RF/Microwave Mixers	70 Cel	0 Cel	Tin/Lead (Sn/Pb)			e0
TDA6130X4	Infineon Technologies		SURFACE MOUNT	14	PLASTIC/EPOXY	BIPOLAR				6	SOP14,.25		RF/Microwave Mixers	70 Cel	0 Cel	Tin/Lead (Sn/Pb)			e0
PMB2331-T	Infineon Technologies	DOUBLE BALANCED							COMPONENT					85 Cel	-30 Cel						2000 MHz
T602B_HMIX	Infineon Technologies	DOUBLE BALANCED							COMPONENT			50 ohm									77 MHz
TBB042G	Infineon Technologies		SURFACE MOUNT	14	PLASTIC/EPOXY	BIPOLAR		2.9 mA		12	SOP14,.25		RF/Microwave Mixers	70 Cel	-15 Cel	Tin/Lead (Sn/Pb)			e0
TBB204G	Infineon Technologies		SURFACE MOUNT	14	PLASTIC/EPOXY			3.9 mA		5	SOP14,.25		RF/Microwave Mixers	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)			e0
TUA6010X	Infineon Technologies	DOUBLE BALANCED	SURFACE MOUNT	28	PLASTIC/EPOXY	BIPOLAR		33 mA		5	SOP28,.4		RF/Microwave Mixers	80 Cel	-20 Cel	Tin/Lead (Sn/Pb)			e0

RF/Microwave Mixers

RF/microwave mixers are electronic devices used in radio frequency (RF) and microwave systems to convert one frequency to another. They perform frequency translation by multiplying two input signals, a local oscillator (LO) signal and a radio frequency (RF) or intermediate frequency (IF) signal, to produce an output signal that has the sum and difference frequencies of the inputs.

RF/microwave mixers are commonly used in a variety of applications, including frequency conversion, phase detection, modulation and demodulation, and signal generation. They are widely used in telecommunications, radar systems, navigation systems, and satellite communication systems.

RF/microwave mixers are available in various types, including diode mixers, transistor mixers, and monolithic microwave integrated circuit (MMIC) mixers. The choice of mixer depends on the application requirements, such as the desired frequency range, signal bandwidth, conversion gain, and noise figure.