10 RF/Microwave Switches 16

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	Screening Level	No. of Functions	Maximum Input Power (CW)	Maximum Voltage Standing Wave Ratio	Compression Point (1 dB)	Construction	Power Supplies (V)	Package Equivalence Code	Characteristic Impedance	Sub-Category	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Minimum Isolation	Maximum Insertion Loss	Additional Features	Nominal On Time	JESD-609 Code	Minimum Operating Frequency	Maximum Operating Frequency	Port Termination
HMC347A-SX	Analog Devices	DIVERSITY SWITCH	SURFACE MOUNT	10				1	17 dBm		24 dBm	COMPONENT		DIE OR CHIP	50 ohm		85 Cel	-55 Cel		35 dB	2.7 dB	HIGH ISOLATION	.1 us		100 MHz	20000 MHz
HMC347A	Analog Devices	DIVERSITY SWITCH	SURFACE MOUNT	10				1	17 dBm		24 dBm	COMPONENT		DIE OR CHIP	50 ohm		85 Cel	-55 Cel		35 dB	2.7 dB	HIGH ISOLATION	.1 us		100 MHz	20000 MHz
BGS22WL10E6327XTSA1	Infineon Technologies	DPDT	SURFACE MOUNT	10	PLASTIC/EPOXY			2	32 dBm	1.05		COMPONENT	3	LCC10,.05X.06,16	50 ohm		85 Cel	-30 Cel	Gold (Au)	22 dB	.55 dB			e4	100 MHz	3000 MHz
SKY19245-686LF	Skyworks Solutions	SP4T	SURFACE MOUNT	10				1				COMPONENT													100 MHz	2700 MHz
HMC347B-GP	Analog Devices	SPDT	SURFACE MOUNT	10		GAAS		1	17 dBm	1.38	24 dBm	COMPONENT	-5	DIE OR CHIP	50 ohm		85 Cel	-55 Cel		40 dB	2.2 dB	HIGH ISOLATION	.01 us		100 MHz	20000 MHz	ABSORPTIVE
HMC347B	Analog Devices	SPDT	SURFACE MOUNT	10		GAAS		1	17 dBm	1.38	24 dBm	COMPONENT	-5	DIE OR CHIP	50 ohm		85 Cel	-55 Cel		40 dB	2.2 dB	HIGH ISOLATION	.01 us		100 MHz	20000 MHz	ABSORPTIVE
HMC347B-SX	Analog Devices	SPDT	SURFACE MOUNT	10		GAAS		1	17 dBm	1.38	24 dBm	COMPONENT	-5	DIE OR CHIP	50 ohm		85 Cel	-55 Cel		40 dB	2.2 dB	HIGH ISOLATION	.01 us		100 MHz	20000 MHz	ABSORPTIVE
HMC8800	Analog Devices	SPDT	SURFACE MOUNT	10			38535V;38534K;883S	1	30 dBm			COMPONENT		DIE OR CHIP	50 ohm		85 Cel	-55 Cel		40 dB	2.9 dB				0 MHz	15000 MHz
UPG2404T6Q-E2-A	Renesas Electronics	SP3T	SURFACE MOUNT	10	PLASTIC/EPOXY	GAAS		1	36 dBm			COMPONENT	2.8	SOLCC10,.05,16	50 ohm	RF/Microwave Switches	85 Cel	-45 Cel	Tin/Bismuth (Sn/Bi)	17 dB	.8 dB	HIGH ISOLATION		e6	10 MHz	2000 MHz
UPG2045TQ-E1-A	Renesas Electronics	SP3T	SURFACE MOUNT	10	PLASTIC/EPOXY	GAAS		1	36.02 dBm			COMPONENT	2.4	SOLCC10,.1,16	50 ohm	RF/Microwave Switches	85 Cel	-45 Cel	Tin/Bismuth (Sn/Bi)	13 dB	.8 dB			e6	500 MHz	2000 MHz
UPG2045TQ-E1	Renesas Electronics	SP3T	SURFACE MOUNT	10	PLASTIC/EPOXY	GAAS		1	36.02 dBm			COMPONENT	2.4	SOLCC10,.1,16	50 ohm	RF/Microwave Switches	85 Cel	-45 Cel	Tin/Lead (Sn/Pb)	13 dB	.8 dB			e0	500 MHz	2000 MHz
UPG2031TQ-E1-A	Renesas Electronics	SP3T	SURFACE MOUNT	10	PLASTIC/EPOXY	GAAS		1					2.8	SOLCC10,.1,16		RF/Microwave Switches	85 Cel	-45 Cel		17 dB	.8 dB		.15 us			2000 MHz
UPG2405T6Q-E2-A	Renesas Electronics	DIVERSITY SWITCH	SURFACE MOUNT	10	PLASTIC/EPOXY	GAAS		1	34 dBm			COMPONENT	2.8	SOLCC10,.05,16	50 ohm	RF/Microwave Switches	85 Cel	-45 Cel		16 dB	.85 dB	HIGH ISOLATION			10 MHz	2500 MHz
UPG2024TQ-E1-A	Renesas Electronics	DIVERSITY SWITCH	SURFACE MOUNT	10	PLASTIC/EPOXY	GAAS		1			30 dBm		2.8	SOLCC10,.1,16		RF/Microwave Switches	85 Cel	-40 Cel		20 dB	1.7 dB					5850 MHz
UPG2027TQ-E1-A	Renesas Electronics	SPDT	SURFACE MOUNT	10	PLASTIC/EPOXY	GAAS		1					2.5/5	SOLCC10,.1,16		RF/Microwave Switches	85 Cel	-45 Cel		17 dB	.75 dB					2000 MHz
UPG2031TQ-E1	Renesas Electronics	DIVERSITY SWITCH	SURFACE MOUNT	10	PLASTIC/EPOXY	GAAS		1					2.8	SOLCC10,.1,16		RF/Microwave Switches	85 Cel	-40 Cel		17 dB	.8 dB		.15 us			2000 MHz

RF/Microwave Switches

RF/microwave switches are electronic components used to selectively route high-frequency signals between input and output ports. These switches are essential building blocks in radio communication systems, test and measurement equipment, and radar systems. RF/microwave switches are designed to operate in a specific frequency range, and their performance is characterized by parameters such as insertion loss, isolation, and switching speed.

There are different types of RF/microwave switches, including electromechanical switches, PIN diode switches, and solid-state switches. Electromechanical switches use mechanical contacts to switch between input and output ports, while PIN diode switches and solid-state switches use electronic control signals to route signals between different ports. PIN diode switches are suitable for lower power applications, while solid-state switches are capable of handling higher power levels.

RF/microwave switches can be classified based on their configuration and functionality. Single-pole single-throw (SPST) switches have a single input and a single output and can switch between two states, while single-pole double-throw (SPDT) switches have a single input and two outputs and can switch between two output ports. Multi-throw switches have more than two output ports and can switch between multiple states. Switches can also be classified as absorptive or reflective, depending on their ability to absorb or reflect the input signal when it is not being routed to the output port.