14 RF/Microwave Switches 9

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	No. of Functions	Maximum Input Power (CW)	Maximum Voltage Standing Wave Ratio	Maximum Supply Current	Compression Point (1 dB)	Construction	Power Supplies (V)	Package Equivalence Code	Characteristic Impedance	Sub-Category	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Minimum Isolation	Maximum Insertion Loss	Additional Features	Nominal On Time	JESD-609 Code	Minimum Operating Frequency	Maximum Operating Frequency	Port Termination
SKY13416-485LF	Skyworks Solutions	SP6T	SURFACE MOUNT	14			1	37.5 dBm	5	.05 mA		COMPONENT	2.6	SOLCC14,.08,16	50 ohm		85 Cel	-40 Cel		15 dB	.95 dB		1.75 us		100 MHz	6000 MHz
ADRF5424	Analog Devices	SPDT	SURFACE MOUNT	14		GAAS	1	21 dBm	1.58			COMPONENT	-3.3,3,3	DIE OR CHIP	50 ohm						2.2 dB	CMOS COMPATIBLE, HIGH LINEARITY AND ISOLATION	.01 us		100 MHz	60000 MHz	REFLECTIVE
HMC182S14RTR	Analog Devices	DIVERSITY SWITCH	SURFACE MOUNT	14	PLASTIC/EPOXY	GAAS	1	30 dBm			22 dBm	COMPONENT	-5	SOP14,.25	50 ohm		85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	27 dB	1.5 dB		.05 us	e0	0 MHz	2000 MHz	ABSORPTIVE
ADRF5424BCZ-SX	Analog Devices	SPDT	SURFACE MOUNT	14		GAAS	1	21 dBm	1.58			COMPONENT	-3.3,3,3	DIE OR CHIP	50 ohm						2.2 dB	CMOS COMPATIBLE, HIGH LINEARITY AND ISOLATION	.01 us		100 MHz	60000 MHz	REFLECTIVE
ADRF5424BCZ	Analog Devices	SPDT	SURFACE MOUNT	14		GAAS	1	21 dBm	1.58			COMPONENT	-3.3,3,3	DIE OR CHIP	50 ohm						2.2 dB	CMOS COMPATIBLE, HIGH LINEARITY AND ISOLATION	.01 us		100 MHz	60000 MHz	REFLECTIVE
ADRF5424BCZ-GP	Analog Devices	SPDT	SURFACE MOUNT	14		GAAS	1	21 dBm	1.58			COMPONENT	-3.3,3,3	DIE OR CHIP	50 ohm						2.2 dB	CMOS COMPATIBLE, HIGH LINEARITY AND ISOLATION	.01 us		100 MHz	60000 MHz	REFLECTIVE
HMC182S14E	Analog Devices	DIVERSITY SWITCH	SURFACE MOUNT	14	PLASTIC/EPOXY	GAAS	1	30 dBm			22 dBm	COMPONENT	-5	SOP14,.25	50 ohm	RF/Microwave Switches	85 Cel	-40 Cel	MATTE TIN	28 dB	1.2 dB		.05 us	e3	0 MHz	2000 MHz	ABSORPTIVE
HMC182S14	Analog Devices	DIVERSITY SWITCH	SURFACE MOUNT	14	PLASTIC/EPOXY	GAAS	1	30 dBm			22 dBm	COMPONENT	-5	SOP14,.25	50 ohm	RF/Microwave Switches	85 Cel	-40 Cel	TIN LEAD	28 dB	1.2 dB		.05 us	e0	0 MHz	2000 MHz	ABSORPTIVE
AFEM-S260	Broadcom	SP4T	SURFACE MOUNT	14	PLASTIC/EPOXY	GAAS	1						2.7/5	LCC14,.12X.16,28		RF/Microwave Switches	85 Cel	-20 Cel		22 dB						4000 MHz

RF/Microwave Switches

RF/microwave switches are electronic components used to selectively route high-frequency signals between input and output ports. These switches are essential building blocks in radio communication systems, test and measurement equipment, and radar systems. RF/microwave switches are designed to operate in a specific frequency range, and their performance is characterized by parameters such as insertion loss, isolation, and switching speed.

There are different types of RF/microwave switches, including electromechanical switches, PIN diode switches, and solid-state switches. Electromechanical switches use mechanical contacts to switch between input and output ports, while PIN diode switches and solid-state switches use electronic control signals to route signals between different ports. PIN diode switches are suitable for lower power applications, while solid-state switches are capable of handling higher power levels.

RF/microwave switches can be classified based on their configuration and functionality. Single-pole single-throw (SPST) switches have a single input and a single output and can switch between two states, while single-pole double-throw (SPDT) switches have a single input and two outputs and can switch between two output ports. Multi-throw switches have more than two output ports and can switch between multiple states. Switches can also be classified as absorptive or reflective, depending on their ability to absorb or reflect the input signal when it is not being routed to the output port.