PLASTIC/EPOXY RF/Microwave Switches 439

Reset All
Part RoHS Manufacturer RF or Microwave Device Type Mounting Feature No. of Terminals Package Body Material Technology Screening Level No. of Functions Maximum Input Power (CW) Maximum Voltage Standing Wave Ratio Maximum Supply Current Compression Point (1 dB) Construction Power Supplies (V) Package Equivalence Code Characteristic Impedance Sub-Category Maximum Operating Temperature Minimum Operating Temperature Terminal Finish Minimum Isolation Maximum Insertion Loss Additional Features Nominal On Time JESD-609 Code Minimum Operating Frequency Maximum Operating Frequency Port Termination

UPG2022T5G-E1-A

Renesas Electronics

SPDT

SURFACE MOUNT

6

PLASTIC/EPOXY

GAAS

1

2.8

SOLCC6,.08,38

RF/Microwave Switches

85 Cel

-40 Cel

13 dB

1.1 dB

.02 us

5850 MHz

UPG2413T6Z-E2-A

Renesas Electronics

DIVERSITY SWITCH

SURFACE MOUNT

8

PLASTIC/EPOXY

GAAS

1

34 dBm

27 dBm

COMPONENT

3

SOLCC8,.06,16

50 ohm

RF/Microwave Switches

85 Cel

-45 Cel

15 dB

.75 dB

HIGH ISOLATION

.05 us

500 MHz

3000 MHz

UPG2012TB-A

Renesas Electronics

SPDT

SURFACE MOUNT

6

PLASTIC/EPOXY

GAAS

1

24 dBm

2.8

TSSOP6,.08

RF/Microwave Switches

85 Cel

-45 Cel

24 dB

.5 dB

2500 MHz

AFEM-S260

Broadcom

SP4T

SURFACE MOUNT

14

PLASTIC/EPOXY

GAAS

1

2.7/5

LCC14,.12X.16,28

RF/Microwave Switches

85 Cel

-20 Cel

22 dB

4000 MHz

ALM-40220-BLKG

Broadcom

SPDT

SURFACE MOUNT

5

PLASTIC/EPOXY

1

41.99 dBm

COMPONENT

5

LCC5(UNSPEC)

50 ohm

RF/Microwave Switches

17 dB

.45 dB

HIGH ISOLATION

2010 MHz

2025 MHz

REFLECTIVE

ALM-40220-TR1G

Broadcom

SPDT

SURFACE MOUNT

5

PLASTIC/EPOXY

1

41.99 dBm

COMPONENT

5

LCC5(UNSPEC)

50 ohm

RF/Microwave Switches

17 dB

.45 dB

HIGH ISOLATION

2010 MHz

2025 MHz

REFLECTIVE

SMP-11003

Samsung

SPDT

SURFACE MOUNT

8

PLASTIC/EPOXY

GAAS

1

1.9

23 dBm

-3

SOP8,.25

RF/Microwave Switches

85 Cel

-55 Cel

Tin/Lead (Sn/Pb)

15 dB

1.8 dB

.015 us

e0

3000 MHz

REFLECTIVE

RF/Microwave Switches

RF/microwave switches are electronic components used to selectively route high-frequency signals between input and output ports. These switches are essential building blocks in radio communication systems, test and measurement equipment, and radar systems. RF/microwave switches are designed to operate in a specific frequency range, and their performance is characterized by parameters such as insertion loss, isolation, and switching speed.

There are different types of RF/microwave switches, including electromechanical switches, PIN diode switches, and solid-state switches. Electromechanical switches use mechanical contacts to switch between input and output ports, while PIN diode switches and solid-state switches use electronic control signals to route signals between different ports. PIN diode switches are suitable for lower power applications, while solid-state switches are capable of handling higher power levels.

RF/microwave switches can be classified based on their configuration and functionality. Single-pole single-throw (SPST) switches have a single input and a single output and can switch between two states, while single-pole double-throw (SPDT) switches have a single input and two outputs and can switch between two output ports. Multi-throw switches have more than two output ports and can switch between multiple states. Switches can also be classified as absorptive or reflective, depending on their ability to absorb or reflect the input signal when it is not being routed to the output port.