TRANSFER SWITCH RF/Microwave Switches 11

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	No. of Functions	Maximum Input Power (CW)	Maximum Supply Current	Compression Point (1 dB)	Construction	Power Supplies (V)	Package Equivalence Code	Characteristic Impedance	Sub-Category	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Minimum Isolation	Maximum Insertion Loss	Additional Features	Nominal On Time	JESD-609 Code	Minimum Operating Frequency	Maximum Operating Frequency	Port Termination
HMC427ALP3E	Analog Devices	TRANSFER SWITCH	SURFACE MOUNT	16	PLASTIC/EPOXY		1	25.5 dBm	.01 mA	26 dBm	COMPONENT	5	LCC16,.12SQ,20	50 ohm		85 Cel	-40 Cel		35 dB	2.1 dB		.01 us		0 MHz	8000 MHz	ABSORPTIVE
HMC427ALP3ETR	Analog Devices	TRANSFER SWITCH						26.99 dBm			COMPONENT			50 ohm		85 Cel	-40 Cel	MATTE TIN		2.1 dB	HIGH ISOLATION		e3	0 MHz	8000 MHz
LM96530SQX/NOPB	Texas Instruments	TRANSFER SWITCH	SURFACE MOUNT	60	PLASTIC/EPOXY		1					5	LCC60,.35SQ,20		RF/Microwave Switches	70 Cel	0 Cel	Matte Tin (Sn)				2 us	e3
LM96530SQE/NOPB	Texas Instruments	TRANSFER SWITCH	SURFACE MOUNT	60	PLASTIC/EPOXY		1					5	LCC60,.35SQ,20		RF/Microwave Switches	70 Cel	0 Cel	Matte Tin (Sn)				2 us	e3
HMC427LP3TR	Analog Devices	TRANSFER SWITCH
HMC427LP3ETR	Analog Devices	TRANSFER SWITCH
HMC427LP3	Analog Devices	TRANSFER SWITCH						26.99 dBm			COMPONENT			50 ohm		85 Cel	-40 Cel	TIN LEAD		2.1 dB	HIGH ISOLATION		e0	0 MHz	8000 MHz
HMC427LP3E	Analog Devices	TRANSFER SWITCH						26.99 dBm			COMPONENT			50 ohm		85 Cel	-40 Cel	Matte Tin (Sn)		2.1 dB	HIGH ISOLATION		e3	0 MHz	8000 MHz
HMC174MS8RTR	Analog Devices	TRANSFER SWITCH	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1			36 dBm		5	TSSOP8,.19		RF/Microwave Switches	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	15 dB	1.8 dB		.024 us	e0		3000 MHz	REFLECTIVE
HMC174MS8TR	Analog Devices	TRANSFER SWITCH	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1			36 dBm		5	TSSOP8,.19		RF/Microwave Switches	85 Cel	-40 Cel	Tin/Lead (Sn/Pb)	15 dB	1.8 dB		.024 us	e0		3000 MHz	REFLECTIVE
UPD5720K-E3-A	Renesas Electronics	TRANSFER SWITCH	SURFACE MOUNT	20	PLASTIC/EPOXY	CMOS	1					5	LCC20,.16SQ,20		RF/Microwave Switches	85 Cel	-40 Cel		37 dB	9 dB					2150 MHz

RF/Microwave Switches

RF/microwave switches are electronic components used to selectively route high-frequency signals between input and output ports. These switches are essential building blocks in radio communication systems, test and measurement equipment, and radar systems. RF/microwave switches are designed to operate in a specific frequency range, and their performance is characterized by parameters such as insertion loss, isolation, and switching speed.

There are different types of RF/microwave switches, including electromechanical switches, PIN diode switches, and solid-state switches. Electromechanical switches use mechanical contacts to switch between input and output ports, while PIN diode switches and solid-state switches use electronic control signals to route signals between different ports. PIN diode switches are suitable for lower power applications, while solid-state switches are capable of handling higher power levels.

RF/microwave switches can be classified based on their configuration and functionality. Single-pole single-throw (SPST) switches have a single input and a single output and can switch between two states, while single-pole double-throw (SPDT) switches have a single input and two outputs and can switch between two output ports. Multi-throw switches have more than two output ports and can switch between multiple states. Switches can also be classified as absorptive or reflective, depending on their ability to absorb or reflect the input signal when it is not being routed to the output port.