Onsemi RF/Microwave Switches 18

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	Screening Level	No. of Functions	Maximum Voltage Standing Wave Ratio	Compression Point (1 dB)	Construction	Power Supplies (V)	Package Equivalence Code	Sub-Category	Maximum Operating Temperature	Minimum Operating Temperature	Minimum Isolation	Maximum Insertion Loss	Nominal On Time	Minimum Operating Frequency	Maximum Operating Frequency
SPM3202	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS		1	1.5	15 dBm			TSSOP6,.08	RF/Microwave Switches	85 Cel	-20 Cel	15 dB	.85 dB	.02 us
SPM3227	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY			1	1.5	15 dBm			SOLCC6,.03,18	RF/Microwave Switches	85 Cel	-40 Cel	16 dB	.6 dB			2500 MHz
SPM3315	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY			1	1.5	29 dBm		2.7	SOLCC6,.03,18	RF/Microwave Switches	85 Cel	-40 Cel	17 dB	.5 dB			2500 MHz
NSVG1001MXT1G	Onsemi	SPDT	SURFACE MOUNT	6			AEC-Q100	1		27 dBm	COMPONENT		SOLCC6,.04,14		105 Cel	-40 Cel	20 dB	.95 dB	.1 us
NSG1001MXT1G	Onsemi	DIVERSITY SWITCH	SURFACE MOUNT	6	PLASTIC/EPOXY			1		27 dBm	COMPONENT		SOLCC6,.04,14		105 Cel	-40 Cel	20 dB	.95 dB		2500 MHz	8000 MHz
SPM3221	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS		1	1.5	27 dBm		3	FL6,.07,25	RF/Microwave Switches	85 Cel	-40 Cel	27 dB	.4 dB	.05 us		2500 MHz
SPM3225	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS		1	1.5	31 dBm		1.8/3	TSSOP6,.08	RF/Microwave Switches	85 Cel	-40 Cel	16 dB	.6 dB	.02 us		2500 MHz
SPM3314	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY			1	1.5	29 dBm		2.7	SOLCC6,.03,18	RF/Microwave Switches	85 Cel	-40 Cel	17 dB	.5 dB			2500 MHz
SPM3252	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS		1	2				TSOP6,.11,37	RF/Microwave Switches	70 Cel	-20 Cel	20 dB	.95 dB	.02 us		1900 MHz
SPM3226	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY			1	1.5				SOLCC6,.03,18	RF/Microwave Switches	85 Cel	-40 Cel	15 dB	.55 dB	.02 us
SPM3501	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY			1	1.7	20 dBm		3	TSSOP6,.08	RF/Microwave Switches	85 Cel	-40 Cel	10 dB	1.3 dB	.1 us		6000 MHz
SPM3205	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS		1	1.5	15 dBm			TSOP6,.11,37	RF/Microwave Switches	85 Cel	-20 Cel	15 dB	.85 dB	.02 us		1033 MHz
NSG1002MXT1G	Onsemi	SP3T	SURFACE MOUNT	8	PLASTIC/EPOXY			1		30 dBm	COMPONENT	3	SOLCC8,.06,16		105 Cel	-40 Cel	20 dB	.95 dB
SPM3224	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS		1	1.5			2.8	TSSOP6,.08	RF/Microwave Switches	85 Cel	-40 Cel	15 dB	.55 dB	.02 us		2500 MHz
SPM3215	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY			1	1.6	26 dBm		3	TSSOP6,.08	RF/Microwave Switches	85 Cel	-20 Cel	10 dB	1.4 dB			2500 MHz
NSVG1002MXT1G	Onsemi	SP3T	SURFACE MOUNT	8			AEC-Q100	1		30 dBm	COMPONENT		SOLCC6,.06,16		105 Cel	-40 Cel	20 dB	.95 dB	.1 us	1000 MHz	6000 MHz
SPM3313	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY			1	1.5	30 dBm		2.7	SOLCC6,.03,18	RF/Microwave Switches	85 Cel	-40 Cel	16 dB	.55 dB			2500 MHz
SPM3255	Onsemi	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY			1	2	20 dBm		3	TSOP6,.11,37	RF/Microwave Switches	70 Cel	-20 Cel	20 dB	.9 dB	.02 us		1900 MHz

RF/Microwave Switches

RF/microwave switches are electronic components used to selectively route high-frequency signals between input and output ports. These switches are essential building blocks in radio communication systems, test and measurement equipment, and radar systems. RF/microwave switches are designed to operate in a specific frequency range, and their performance is characterized by parameters such as insertion loss, isolation, and switching speed.

There are different types of RF/microwave switches, including electromechanical switches, PIN diode switches, and solid-state switches. Electromechanical switches use mechanical contacts to switch between input and output ports, while PIN diode switches and solid-state switches use electronic control signals to route signals between different ports. PIN diode switches are suitable for lower power applications, while solid-state switches are capable of handling higher power levels.

RF/microwave switches can be classified based on their configuration and functionality. Single-pole single-throw (SPST) switches have a single input and a single output and can switch between two states, while single-pole double-throw (SPDT) switches have a single input and two outputs and can switch between two output ports. Multi-throw switches have more than two output ports and can switch between multiple states. Switches can also be classified as absorptive or reflective, depending on their ability to absorb or reflect the input signal when it is not being routed to the output port.