TE Connectivity RF/Microwave Switches 19

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	No. of Functions	Maximum Input Power (CW)	Maximum Voltage Standing Wave Ratio	Compression Point (1 dB)	Construction	Power Supplies (V)	Package Equivalence Code	Characteristic Impedance	Sub-Category	Maximum Operating Temperature	Minimum Operating Temperature	Minimum Isolation	Maximum Insertion Loss	Additional Features	Nominal On Time	Minimum Operating Frequency	Maximum Operating Frequency	Port Termination
MASWSS0115TR-3000	TE Connectivity	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1			21 dBm		2.5	TSSOP6,.08		RF/Microwave Switches	85 Cel	-40 Cel	20 dB	.55 dB		.04 us		3000 MHz
MA4AGSW1A	TE Connectivity	SPST				GAAS	1					-5	DIE OR CHIP		RF/Microwave Switches	125 Cel	-55 Cel						50000 MHz	ABSORPTIVE
MASWSS0180	TE Connectivity	SPDT	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1		1.1	30 dBm		-2.9	SOP8,.25		RF/Microwave Switches	85 Cel	-40 Cel	36 dB	.7 dB		.02 us		2500 MHz
MASWSS0180TR	TE Connectivity	SPDT	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1		1.1	30 dBm		-2.9	SOP8,.25		RF/Microwave Switches	85 Cel	-40 Cel	36 dB	.7 dB		.02 us		2500 MHz
MASWSS0178TR-3000	TE Connectivity	SPDT	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1					5	TSSOP8,.19		RF/Microwave Switches	85 Cel	-40 Cel	51 dB	.7 dB		.015 us		3000 MHz
MA4SW510	TE Connectivity	SP5T					1					25	DIE OR CHIP		RF/Microwave Switches	150 Cel	-65 Cel	28 dB	1.4 dB				26000 MHz	REFLECTIVE
MA4SW510B-1	TE Connectivity	SP5T					1					15	DIE OR CHIP		RF/Microwave Switches	125 Cel	-65 Cel	25 dB	2.1 dB				18000 MHz
MA4AGSW1	TE Connectivity	SPST				GAAS	1					-5	DIE OR CHIP		RF/Microwave Switches	125 Cel	-55 Cel	20 dB	.6 dB				50000 MHz	REFLECTIVE
MA4SW310B-1	TE Connectivity	SP3T					1						DIE OR CHIP		RF/Microwave Switches	125 Cel	-65 Cel	36 dB	1.81 dB		.05 us		26000 MHz
MASW-002100-11910W	TE Connectivity	SPDT					1						DIE OR CHIP		RF/Microwave Switches	125 Cel	-65 Cel	34 dB	1.2 dB				20000 MHz
MASWSS0129TR-3000	TE Connectivity	DPDT	SURFACE MOUNT	12	PLASTIC/EPOXY	GAAS	1			31 dBm		3	LCC12,.12SQ,20		RF/Microwave Switches	85 Cel	-40 Cel	25 dB	1.55 dB		.09 us		6000 MHz
MASWSS0178	TE Connectivity	SPDT	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1					5	TSSOP8,.19		RF/Microwave Switches	85 Cel	-40 Cel	51 dB	.7 dB		.015 us		3000 MHz
SW-277	TE Connectivity	SPDT	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1	42.04 dBm	1.2	33 dBm	COMPONENT	5	SOP8,.25	50 ohm	RF/Microwave Switches	85 Cel	-40 Cel	27 dB	.65 dB	HIGH RELIABILITY	.035 us	0 MHz	2000 MHz
SW-277PIN	TE Connectivity	SPDT	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1			35.8 dBm		5/8	SOP8,.25		RF/Microwave Switches	85 Cel	-40 Cel	14 dB	.8 dB		.035 us		2500 MHz	REFLECTIVE
SW-277TR	TE Connectivity	SPDT	SURFACE MOUNT	8	PLASTIC/EPOXY	GAAS	1			33 dBm		5/8	SOP8,.25		RF/Microwave Switches	85 Cel	-40 Cel	14 dB	.8 dB		35 us		2500 MHz	REFLECTIVE
MASWSS0204TR-3000	TE Connectivity	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1			38 dBm		2.7	TSSOP6,.08		RF/Microwave Switches	85 Cel	-40 Cel	23 dB	.65 dB		.1 us		3000 MHz
MASWSS0115	TE Connectivity	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1			21 dBm		2.5	TSSOP6,.08		RF/Microwave Switches	85 Cel	-40 Cel	20 dB	.55 dB		.04 us		3000 MHz
MASWSS0166TR-3000	TE Connectivity	SPDT	SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS	1		1.2			-2.5	TSSOP6,.08		RF/Microwave Switches	85 Cel	-40 Cel	10 dB	.7 dB		.02 us		3000 MHz
MASWSS0175	TE Connectivity	DPDT	SURFACE MOUNT	12	PLASTIC/EPOXY	GAAS	2			33 dBm		3	LCC12,.12SQ,20		RF/Microwave Switches	85 Cel	-40 Cel	15 dB	1.3 dB		.04 us		6000 MHz

RF/Microwave Switches

RF/microwave switches are electronic components used to selectively route high-frequency signals between input and output ports. These switches are essential building blocks in radio communication systems, test and measurement equipment, and radar systems. RF/microwave switches are designed to operate in a specific frequency range, and their performance is characterized by parameters such as insertion loss, isolation, and switching speed.

There are different types of RF/microwave switches, including electromechanical switches, PIN diode switches, and solid-state switches. Electromechanical switches use mechanical contacts to switch between input and output ports, while PIN diode switches and solid-state switches use electronic control signals to route signals between different ports. PIN diode switches are suitable for lower power applications, while solid-state switches are capable of handling higher power levels.

RF/microwave switches can be classified based on their configuration and functionality. Single-pole single-throw (SPST) switches have a single input and a single output and can switch between two states, while single-pole double-throw (SPDT) switches have a single input and two outputs and can switch between two output ports. Multi-throw switches have more than two output ports and can switch between multiple states. Switches can also be classified as absorptive or reflective, depending on their ability to absorb or reflect the input signal when it is not being routed to the output port.