Broadcom RF/Microwave Up/Down Converters 14

Reset All

Part	Manufacturer	RF or Microwave Device Type	Mounting Feature	No. of Terminals	Package Body Material	Technology	Maximum RF Output Frequency	Maximum Voltage Standing Wave Ratio	Maximum Supply Current	Minimum RF Output Frequency	Construction	Minimum RF Input Frequency	Power Supplies (V)	Package Equivalence Code	Characteristic Impedance	Sub-Category	Maximum Operating Temperature	Minimum Down Conversion Gain	Maximum Output Power	Minimum Intermediate Frequency (IF)	Maximum RF Input Frequency	Minimum Operating Temperature	Terminal Finish	LO Tunable	Maximum Noise Figure	Additional Features	JESD-609 Code	Maximum Intermediate Frequency (IF)
DRR1-2311	Broadcom	DOWN CONVERTER									COMPONENT	21200 MHz			50 ohm		70 Cel	18 dB	0 dBm	610 MHz	23600 MHz	-30 Cel		YES	5.5 dB			650 MHz
HPMX-7113-TR1	Broadcom	DOWN CONVERTER									COMPONENT	400 MHz			50 ohm		85 Cel	10 dB		50 MHz	2400 MHz	-40 Cel	Tin/Lead (Sn/Pb)	NO	10 dB		e0	400 MHz
DRR1-2312	Broadcom	DOWN CONVERTER									COMPONENT	21200 MHz			50 ohm		70 Cel	18 dB	0 dBm	610 MHz	23600 MHz	-30 Cel		YES	5.5 dB			650 MHz
HPMX-5001	Broadcom	UP/DOWN CONVERTER					2500 MHz	1.8		1500 MHz	COMPONENT	1500 MHz						12 dB	2 dBm		2500 MHz			YES
IAM-91563	Broadcom		SURFACE MOUNT	6	PLASTIC/EPOXY	GAAS			12 mA				3	TSSOP6,.08		RF/Microwave Up/Down Converters	85 Cel					-40 Cel
HPMX-7201-TR1	Broadcom	UP CONVERTER					849 MHz			824 MHz	COMPONENT				50 ohm		85 Cel					-40 Cel	Tin/Lead (Sn/Pb)	YES		IT CAN ALSO OPERATE AT 1850 TO 1910 MHZ	e0
HPMX-7123-TR1	Broadcom	DOWN CONVERTER									COMPONENT	400 MHz			50 ohm		85 Cel	12.5 dB		50 MHz	2400 MHz	-40 Cel	Tin/Lead (Sn/Pb)	NO	11.5 dB		e0	400 MHz
DRR1-2322	Broadcom	DOWN CONVERTER									COMPONENT	21200 MHz			50 ohm		70 Cel	18 dB	0 dBm	1240 MHz	23600 MHz	-30 Cel		YES	5.5 dB			1280 MHz
HPMX-7103-TR1	Broadcom	DOWN CONVERTER									COMPONENT	400 MHz			50 ohm		85 Cel	15.5 dB		50 MHz	2400 MHz	-40 Cel	Tin/Lead (Sn/Pb)	NO	10 dB		e0	400 MHz
DRR1-3823	Broadcom	DOWN CONVERTER									COMPONENT	37000 MHz					70 Cel	16 dB	0 dBm	1240 MHz	40000 MHz	-30 Cel		YES	9.5 dB			1280 MHz
HPMX-7102-TR1	Broadcom	DOWN CONVERTER										869 MHz			50 ohm		85 Cel	15 dB			894 MHz	-40 Cel	Tin/Lead (Sn/Pb)	NO	10 dB	IT CAN ALSO OPERATE AT 1930 TO 1990 MHZ	e0
DRR1-2321	Broadcom	DOWN CONVERTER									COMPONENT	21200 MHz			50 ohm		70 Cel	18 dB	0 dBm	1240 MHz	23600 MHz	-30 Cel		YES	5.5 dB			1280 MHz
DRR1-3813	Broadcom	DOWN CONVERTER									COMPONENT	37000 MHz					70 Cel	16 dB	0 dBm	610 MHz	40000 MHz	-30 Cel		YES	9.5 dB			650 MHz
AAMGP-6551-TR2G	Broadcom		SURFACE MOUNT	8	METAL								3.5	LCC8,.2SQ,28		RF/Microwave Up/Down Converters

RF/Microwave Up/Down Converters

RF/microwave up/down converters are electronic devices that can convert high frequency (HF) signals to a lower frequency or vice versa. These converters are essential components of modern communication systems, where the frequency of the signal needs to be changed to enable transmission and reception. The up/down conversion process can be achieved through a variety of methods, including heterodyne mixing, direct mixing, and superheterodyne mixing.

Heterodyne mixing involves mixing the incoming signal with a local oscillator signal to generate an intermediate frequency (IF) signal. This method is widely used in superheterodyne receivers and is often used in upconversion. Direct mixing involves converting the frequency of the input signal to the desired frequency using a nonlinear device such as a diode. This method is often used in frequency synthesizers and mixers.

Superheterodyne mixing combines the advantages of heterodyne and direct mixing to achieve high sensitivity and selectivity. In a superheterodyne receiver, the incoming signal is mixed with a local oscillator signal to produce an IF signal, which is then amplified and demodulated. Superheterodyne mixing is also used in frequency upconversion, where the input signal is mixed with a local oscillator signal to produce the desired output frequency.

RF/microwave up/down converters are used in a variety of applications, including wireless communication systems, satellite communication systems, radar systems, and test and measurement equipment. They are available in various forms, including integrated circuits (ICs), modules, and subsystems, and can operate at a range of frequencies, from a few megahertz to several gigahertz.