Part | RoHS | Manufacturer | Sensors or Transducers Type | Mounting Feature | No. of Terminals | Output Type | Package Shape or Style | Output Range | Package Body Material | Minimum Range Of Magnetic Field | Maximum Supply Voltage | Maximum Output Current | Technology | Screening Level | Input Mode | Maximum Magnetic Field Range | Hysteresis | Body Length/Diameter | Body Width | Power Supplies (V) | Output Circuit Type | Resistance | Package Equivalence Code | No. of Axes | Sub-Category | Linearity (%) | Body Height | Minimum Supply Voltage | Maximum Operating Temperature | Response Time | Minimum Operating Temperature | Sensitivity (mV/G) | Terminal Finish | Termination Type | Output Interface Type | Output (V) | Maximum Operating Current | Output Polarity | Additional Features | Maximum Measurement Range (mm) | Housing | JESD-609 Code | Operating Frequency | Minimum Measurement Range (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The Cherry |
MAGNETIC FIELD SENSOR,HALL EFFECT |
PANEL MOUNT |
DIGITAL VOLTAGE |
RECTANGULAR |
500mV |
19.5 mT |
24 V |
25 A |
40 mT |
14.27 mm |
9.53 inch |
28.58 mm |
4.5 V |
85 Cel |
-40 Cel |
SOLDER |
12 mA |
MEETS IEC529, IP67 |
PLASTIC |
||||||||||||||||||||||||
Sypris Test & Measurement |
MAGNETIC FIELD SENSOR,HALL EFFECT |
PANEL MOUNT |
ANALOG CURRENT |
RECTANGULAR |
18 V |
200 A |
160 mm |
103 inch |
5 ohm |
0.1 |
59 mm |
15 V |
85 Cel |
-25 Cel |
220 mA |
PLASTIC |
||||||||||||||||||||||||||||
Sypris Test & Measurement |
MAGNETIC FIELD SENSOR,HALL EFFECT |
PANEL MOUNT |
RECTANGULAR |
135 V |
88.9 mm |
23.62 inch |
55.37 mm |
1 V |
65 Cel |
-50 Cel |
2-WIRE INTERFACE |
300 mA |
||||||||||||||||||||||||||||||||
|
The Cherry |
MAGNETIC FIELD SENSOR,HALL EFFECT |
PANEL MOUNT |
DIGITAL VOLTAGE |
RECTANGULAR |
500mV |
19.5 mT |
24 V |
25 A |
40 mT |
14.27 mm |
9.53 inch |
28.58 mm |
4.5 V |
85 Cel |
-40 Cel |
SOLDER |
12 mA |
MEETS IEC529, IP67 |
PLASTIC |
||||||||||||||||||||||||
|
Honeywell Sensing And Control |
MAGNETIC FIELD SENSOR,HALL EFFECT |
PANEL MOUNT |
ANALOG CURRENT |
CYLINDRICAL |
20mA |
-12 mT |
25 V |
20 A |
12 mT |
25.4 mm |
-.5 V |
100 Cel |
-40 Cel |
3-WIRE INTERFACE |
10 mA |
||||||||||||||||||||||||||||
|
The Cherry |
MAGNETIC FIELD SENSOR,HALL EFFECT |
PANEL MOUNT |
DIGITAL VOLTAGE |
400mV |
6 mT |
24 V |
20 A |
18.5 mT |
16.31 mm |
3.3 inch |
17.27 mm |
4.5 V |
85 Cel |
-40 Cel |
SOLDER |
5.2 mA |
MEETS IEC529, IP67 |
Magnetic field sensors are electronic devices that measure the strength and direction of magnetic fields and convert them into a measurable electrical signal. They are commonly used in a variety of applications, such as navigation, automotive, industrial, and medical.
Magnetic field sensors work by detecting the change in magnetic field strength or direction as a magnetic field interacts with a sensing element. The sensing element is typically a small piece of magnetic material, such as a magnetoresistive or Hall-effect sensor, which generates a measurable electrical signal proportional to the strength and direction of the magnetic field.
There are several types of magnetic field sensors, including Hall-effect sensors, magnetoresistive sensors, and fluxgate sensors. Hall-effect sensors work by measuring the change in voltage across a thin strip of semiconductor material as it is exposed to a magnetic field. Magnetoresistive sensors work by measuring the change in resistance of a thin film of magnetic material as it is exposed to a magnetic field. Fluxgate sensors work by using a coil to detect the magnetic field and a feedback circuit to measure the strength and direction of the field.