Part | RoHS | Manufacturer | Sensors or Transducers Type | Mounting Feature | No. of Terminals | Output Type | Package Shape or Style | Output Range | Package Body Material | Minimum Range Of Magnetic Field | Maximum Supply Voltage | Maximum Output Current | Technology | Screening Level | Input Mode | Maximum Magnetic Field Range | Hysteresis | Body Length/Diameter | Body Width | Power Supplies (V) | Output Circuit Type | Resistance | Package Equivalence Code | No. of Axes | Sub-Category | Linearity (%) | Body Height | Minimum Supply Voltage | Maximum Operating Temperature | Response Time | Minimum Operating Temperature | Sensitivity (mV/G) | Terminal Finish | Termination Type | Output Interface Type | Output (V) | Maximum Operating Current | Output Polarity | Additional Features | Maximum Measurement Range (mm) | Housing | JESD-609 Code | Operating Frequency | Minimum Measurement Range (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Melexis N V |
MAGNETIC FIELD SENSOR,HALL EFFECT |
SURFACE MOUNT |
16 |
DIGITAL VOLTAGE |
RECTANGULAR |
0.4-2.9V |
20 mT |
3.45 V |
CMOS |
TS 16949 |
70 mT |
5 mm |
4.4 inch |
TSSOP16,.25 |
.9 mm |
3.15 V |
125 Cel |
-40 Cel |
SOLDER |
SPI |
18 mA |
IT ALSO REQUIRES 5V NOMINAL SUPPLY VOLTAGE |
PLASTIC |
||||||||||||||||||||
|
Melexis N V |
MAGNETIC FIELD SENSOR,HALL EFFECT |
SURFACE MOUNT |
8 |
DIGITAL VOLTAGE |
RECTANGULAR |
0.4-2.9V |
20 mT |
3.45 V |
CMOS |
TS 16949 |
70 mT |
4.89 mm |
3.9 inch |
SOP8,.25 |
1.47 mm |
3.15 V |
150 Cel |
-40 Cel |
SOLDER |
SPI |
18 mA |
IT ALSO REQUIRES 5V NOMINAL SUPPLY VOLTAGE |
PLASTIC |
||||||||||||||||||||
|
Melexis N V |
MAGNETIC FIELD SENSOR,HALL EFFECT |
SURFACE MOUNT |
8 |
DIGITAL VOLTAGE |
RECTANGULAR |
0.4-2.9V |
20 mT |
3.45 V |
CMOS |
TS 16949 |
70 mT |
4.89 mm |
3.9 inch |
SOP8,.25 |
1.47 mm |
3.15 V |
125 Cel |
-40 Cel |
SOLDER |
SPI |
18 mA |
IT ALSO REQUIRES 5V NOMINAL SUPPLY VOLTAGE |
PLASTIC |
Magnetic field sensors are electronic devices that measure the strength and direction of magnetic fields and convert them into a measurable electrical signal. They are commonly used in a variety of applications, such as navigation, automotive, industrial, and medical.
Magnetic field sensors work by detecting the change in magnetic field strength or direction as a magnetic field interacts with a sensing element. The sensing element is typically a small piece of magnetic material, such as a magnetoresistive or Hall-effect sensor, which generates a measurable electrical signal proportional to the strength and direction of the magnetic field.
There are several types of magnetic field sensors, including Hall-effect sensors, magnetoresistive sensors, and fluxgate sensors. Hall-effect sensors work by measuring the change in voltage across a thin strip of semiconductor material as it is exposed to a magnetic field. Magnetoresistive sensors work by measuring the change in resistance of a thin film of magnetic material as it is exposed to a magnetic field. Fluxgate sensors work by using a coil to detect the magnetic field and a feedback circuit to measure the strength and direction of the field.