Part | RoHS | Manufacturer | Sensors or Transducers Type | Mounting Feature | No. of Terminals | Output Type | Package Shape or Style | Output Range | Package Body Material | Minimum Range Of Magnetic Field | Maximum Supply Voltage | Maximum Output Current | Technology | Screening Level | Input Mode | Maximum Magnetic Field Range | Hysteresis | Body Length/Diameter | Body Width | Power Supplies (V) | Output Circuit Type | Resistance | Package Equivalence Code | No. of Axes | Sub-Category | Linearity (%) | Body Height | Minimum Supply Voltage | Maximum Operating Temperature | Response Time | Minimum Operating Temperature | Sensitivity (mV/G) | Terminal Finish | Termination Type | Output Interface Type | Output (V) | Maximum Operating Current | Output Polarity | Additional Features | Maximum Measurement Range (mm) | Housing | JESD-609 Code | Operating Frequency | Minimum Measurement Range (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Allegro MicroSystems |
MAGNETIC FIELD SENSOR,HALL EFFECT |
THROUGH HOLE MOUNT |
3 |
ANALOG VOLTAGE |
RECTANGULAR |
2.25-2.75V |
PLASTIC/EPOXY |
0 mT |
BIPOLAR |
90 mT |
4.58 mm |
1.55 inch |
5 |
SINGLE-ENDED |
50 ohm |
SIP3,.04,50 |
Other Sensors |
4.53 mm |
85 Cel |
-20 Cel |
1.3 mV/G |
Matte Tin (Sn) |
SOLDER |
SINGLE-ENDED |
13 mA |
RATIOMETRIC OUTPUT |
PLASTIC |
e3 |
|||||||||||||||
|
Tt Electronics Plc |
MAGNETIC FIELD SENSOR,HALL EFFECT |
SURFACE MOUNT |
3 |
ANALOG VOLTAGE |
RECTANGULAR |
2.25-2.75V |
6 V |
.5 A |
3.5 mT |
4.06 mm |
1.52 inch |
105 |
5.83 mm |
4.5 V |
150 Cel |
-40 Cel |
SOLDER |
10 mA |
COMPLIES TO MIL-883, RATIOMATRIC OUTPUT |
CERAMIC |
Magnetic field sensors are electronic devices that measure the strength and direction of magnetic fields and convert them into a measurable electrical signal. They are commonly used in a variety of applications, such as navigation, automotive, industrial, and medical.
Magnetic field sensors work by detecting the change in magnetic field strength or direction as a magnetic field interacts with a sensing element. The sensing element is typically a small piece of magnetic material, such as a magnetoresistive or Hall-effect sensor, which generates a measurable electrical signal proportional to the strength and direction of the magnetic field.
There are several types of magnetic field sensors, including Hall-effect sensors, magnetoresistive sensors, and fluxgate sensors. Hall-effect sensors work by measuring the change in voltage across a thin strip of semiconductor material as it is exposed to a magnetic field. Magnetoresistive sensors work by measuring the change in resistance of a thin film of magnetic material as it is exposed to a magnetic field. Fluxgate sensors work by using a coil to detect the magnetic field and a feedback circuit to measure the strength and direction of the field.