Part | RoHS | Manufacturer | Switch Type | Mounting Feature | Switch Function | Type (Actuator) | Contact Function | Solderability | AC Maximum Rating R Load (Contact) | Center Contact Plating | Color (Actuator) | Housing Material | Body Color | No. of Switches | Angle (Actuator) | Dielectric Withstand Volts (V) | Terminal Material | Electrical Life | DC Maximum Power Rating R Load (Contact) | Illumination | Insulation Resistance | Circuit Config | Packing Method | Maximum Contact Bounce Time | Body Length/Diameter | Body Width | Length (Bushing) | Sealing | Contact Timing | Maximum Operating Force | Insulator Material | End Contact Plating | Body Height | DC Maximum Rating R Load (Contact) | Finish (Actuator) | Washability | Maximum Operating Temperature | Maximum AC Contact Current | Center Contact Material | Minimum Operating Temperature | Length (Actuator) | Terminal Finish | Switch Action | Maximum DC Contact Current | Termination Type | Manufacturer Series | Contact Resistance | Diameter (Bushing) | Actuator Travel (mm) | End Contact Material | PCB Hole Count | No. of Positions | Maximum DC Contact Voltage | Additional Features | Maximum AC Contact Voltage | JESD-609 Code | Indexing Angle | Terminal Length | AC Maximum Power Rating R Load (Contact) | Material (Actuator) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
C & K Components |
KEYBOARD |
THROUGH HOLE-STRAIGHT |
DPST |
2 |
50000 Cycle(s) |
1X2 |
10 ms |
37.8 mm |
18.8 inch |
IP40 |
12 N |
9 mm |
10A@50VDC |
70 Cel |
-25 Cel |
MOMENTARY |
10 A |
SOLDER |
1.12.000.501/0000 |
50 V |
||||||||||||||||||||||||||||||||||||||||
|
Grayhill |
KEYBOARD |
THROUGH HOLE-STRAIGHT |
DPST |
KEYPAD |
OFF-(ON) |
GOLD OVER NICKEL |
BLACK |
ACRYLONITRILE BUTADIENE STYRENE(ABS) |
BLACK |
1 |
0 deg |
250VAC |
BRASS |
1000000 Cycle(s) |
1000000000 ohm |
10 ms |
17.3482 mm |
17.3482 inch |
BREAK-BEFORE-MAKE |
2.22 N |
POLYPHENYLENE SULPHIDE |
GOLD OVER NICKEL |
11.43 mm |
0.1A@5VDC |
80 Cel |
COPPER ALLOY |
-40 Cel |
GOLD/NICKEL |
MOMENTARY |
.1 A |
SOLDER |
25 mohm |
3.302 |
COPPER ALLOY |
5 V |
LIGHTABLE LEGEND |
.168 inch |
ACRYLONITRILE BUTADIENE STYRENE |
|||||||||||||||||||||
|
ITT Cannon |
KEYPAD SWITCH |
THROUGH HOLE-STRAIGHT |
DPST |
HAND/REFLOW |
1 |
100000 Cycle(s) |
1X1 |
3 ms |
10 mm |
9.2 inch |
BREAK-BEFORE-MAKE |
1.45 N |
11 mm |
.1A@32VDC |
SOLVENT |
85 Cel |
-40 Cel |
MOMENTARY |
.1 A |
SOLDER |
100 mohm |
4 |
32 V |
.138 inch |
Keypad switches are electronic switches that use a matrix of buttons or keys to input data or control functions. They are commonly used in consumer electronics, industrial control systems, and medical devices.
Keypad switches typically consist of a set of buttons or keys arranged in a matrix pattern, which are connected to a printed circuit board (PCB). When a button or key is pressed, it completes a circuit on the PCB, sending a signal to a microcontroller or other control system.
Keypad switches come in different configurations, including membrane keypads, elastomeric keypads, and mechanical keypads. Membrane keypads use a thin, flexible membrane to activate the switch, while elastomeric keypads use a rubber or silicone dome to provide tactile feedback. Mechanical keypads use a physical switch mechanism, similar to a keyboard.