LARGE TYPE Keypad Switches 5
| Part | RoHS | Manufacturer | Switch Type | Mounting Feature | Switch Function | Type (Actuator) | Contact Function | Solderability | AC Maximum Rating R Load (Contact) | Center Contact Plating | Color (Actuator) | Housing Material | Body Color | No. of Switches | Angle (Actuator) | Dielectric Withstand Volts (V) | Terminal Material | Electrical Life | DC Maximum Power Rating R Load (Contact) | Illumination | Insulation Resistance | Circuit Config | Packing Method | Maximum Contact Bounce Time | Body Length/Diameter | Body Width | Length (Bushing) | Sealing | Contact Timing | Maximum Operating Force | Insulator Material | End Contact Plating | Body Height | DC Maximum Rating R Load (Contact) | Finish (Actuator) | Washability | Maximum Operating Temperature | Maximum AC Contact Current | Center Contact Material | Minimum Operating Temperature | Length (Actuator) | Terminal Finish | Switch Action | Maximum DC Contact Current | Termination Type | Manufacturer Series | Contact Resistance | Diameter (Bushing) | Actuator Travel (mm) | End Contact Material | PCB Hole Count | No. of Positions | Maximum DC Contact Voltage | Additional Features | Maximum AC Contact Voltage | JESD-609 Code | Indexing Angle | Terminal Length | AC Maximum Power Rating R Load (Contact) | Material (Actuator) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ITT Cannon |
KEYPAD SWITCH |
SURFACE MOUNT-RIGHT ANGLE |
SPST |
LARGE TYPE |
1 |
250 |
1VA@32VDC |
1000000000 ohm |
1X1 |
TAPE AND REEL |
3 ms |
5.5 mm |
3.5 inch |
IP40 |
4 N |
1.65 mm |
.05A@32VDC |
85 Cel |
-40 Cel |
SILVER |
MOMENTARY-TACTILE |
.05 A |
SOLDER |
100 mohm |
32 V |
e4 |
||||||||||||||||||||||||||||||||||
|
ITT Cannon |
KEYPAD SWITCH |
SURFACE MOUNT-RIGHT ANGLE |
SPST |
LARGE TYPE |
1 |
250 |
0.2VA@32VDC |
1000000000 ohm |
1X1 |
TAPE AND REEL |
3 ms |
5.5 mm |
3.5 inch |
IP40 |
4 N |
1.65 mm |
.01A@32VDC |
125 Cel |
-40 Cel |
GOLD |
MOMENTARY-TACTILE |
.01 A |
SOLDER |
100 mohm |
32 V |
e4 |
||||||||||||||||||||||||||||||||||
|
ITT Cannon |
KEYPAD SWITCH |
SURFACE MOUNT-RIGHT ANGLE |
SPST |
LARGE TYPE |
1 |
250 |
100000 Cycle(s) |
1VA@32VDC |
1000000000 ohm |
1X1 |
TAPE AND REEL |
3 ms |
5.5 mm |
3.5 inch |
IP40 |
2.5 N |
1.65 mm |
.05A@32VDC |
85 Cel |
-40 Cel |
SILVER |
MOMENTARY-TACTILE |
.05 A |
SOLDER |
100 mohm |
0.3 |
32 V |
e4 |
||||||||||||||||||||||||||||||||
|
ITT Cannon |
KEYPAD SWITCH |
SURFACE MOUNT-RIGHT ANGLE |
SPST |
LARGE TYPE |
1 |
250 |
100000 Cycle(s) |
1VA@32VDC |
1000000000 ohm |
1X1 |
TAPE AND REEL |
3 ms |
5.5 mm |
3.5 inch |
IP40 |
2 N |
1.65 mm |
.05A@32VDC |
85 Cel |
-40 Cel |
SILVER |
MOMENTARY-TACTILE |
.05 A |
SOLDER |
100 mohm |
0.3 |
32 V |
e4 |
||||||||||||||||||||||||||||||||
|
ITT Cannon |
KEYPAD SWITCH |
SURFACE MOUNT-RIGHT ANGLE |
SPST |
LARGE TYPE |
1 |
250 |
100000 Cycle(s) |
0.2VA@32VDC |
1000000000 ohm |
1X1 |
TAPE AND REEL |
3 ms |
5.5 mm |
3.5 inch |
IP40 |
2.5 N |
1.65 mm |
.01A@32VDC |
125 Cel |
-40 Cel |
GOLD |
MOMENTARY-TACTILE |
.01 A |
SOLDER |
100 mohm |
0.3 |
32 V |
e4 |
Keypad switches are electronic switches that use a matrix of buttons or keys to input data or control functions. They are commonly used in consumer electronics, industrial control systems, and medical devices.
Keypad switches typically consist of a set of buttons or keys arranged in a matrix pattern, which are connected to a printed circuit board (PCB). When a button or key is pressed, it completes a circuit on the PCB, sending a signal to a microcontroller or other control system.
Keypad switches come in different configurations, including membrane keypads, elastomeric keypads, and mechanical keypads. Membrane keypads use a thin, flexible membrane to activate the switch, while elastomeric keypads use a rubber or silicone dome to provide tactile feedback. Mechanical keypads use a physical switch mechanism, similar to a keyboard.