LONG ROCKER Rocker Switches 3
| Part | RoHS | Manufacturer | Switch Type | Mounting Feature | Switch Function | Type (Actuator) | Contact Function | Solderability | AC Maximum Rating R Load (Contact) | Center Contact Plating | Color (Actuator) | Housing Material | Body Color | Angle (Actuator) | Dielectric Withstand Volts (V) | Terminal Material | AC Maximum Rating M Load (Contact) | Electrical Life | DC Maximum Power Rating R Load (Contact) | Illumination | Insulation Resistance | Packing Method | Body Length/Diameter | Body Width | Sealing | Contact Timing | Maximum Operating Force | Insulator Material | End Contact Plating | Body Height | DC Maximum Rating R Load (Contact) | Finish (Actuator) | Washability | Maximum Operating Temperature | Maximum AC Contact Current | Center Contact Material | Minimum Operating Temperature | Length (Actuator) | Terminal Finish | Switch Action | Maximum DC Contact Current | Termination Type | Manufacturer Series | Contact Resistance | End Contact Material | PCB Hole Count | Maximum DC Contact Voltage | Additional Features | Maximum AC Contact Voltage | JESD-609 Code | Terminal Length | AC Maximum Power Rating R Load (Contact) | Material (Actuator) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ITT Cannon |
ROCKER SWITCH |
THROUGH HOLE-RIGHT ANGLE |
SPDT |
LONG ROCKER |
.02A@20VAC |
100000 Cycle(s) |
12.7 mm |
12.7 inch |
EPOXY TERMINAL SEALED |
6.86 mm |
.02A@20VDC |
85 Cel |
.02 A |
-30 Cel |
Matte Tin (Sn) - with Nickel (Ni) barrier |
LATCHED |
.02 A |
SOLDER |
7000 |
20 V |
20 V |
e3 |
||||||||||||||||||||||||||||||
|
|
ITT Cannon |
ROCKER SWITCH |
THROUGH HOLE-RIGHT ANGLE |
SPDT |
LONG ROCKER |
.02A@20VAC |
40000 Cycle(s) |
12.7 mm |
12.7 inch |
EPOXY TERMINAL SEALED |
6.86 mm |
.02A@20VDC |
85 Cel |
.02 A |
-30 Cel |
Matte Tin (Sn) - with Nickel (Ni) barrier |
LATCHED AND MOMENTARY |
.02 A |
SOLDER |
7000 |
20 V |
20 V |
e3 |
||||||||||||||||||||||||||||||
|
|
ITT Cannon |
ROCKER SWITCH |
THROUGH HOLE-RIGHT ANGLE |
SPDT |
LONG ROCKER |
ON-ON |
MIL-STD |
.02A@20VAC |
GOLD OVER NICKEL |
BLACK |
SPRING STEEL |
25 deg |
1000VRMS |
COPPER ALLOY |
40000 Cycle(s) |
0.4VA@20VDC |
1000000000 ohm |
12.7 mm |
12.7 inch |
EPOXY TERMINAL SEALED |
GLASS FILLED NYLON |
GOLD OVER NICKEL |
6.6 mm |
.02A@20VDC |
MATTE |
PRESSURE |
85 Cel |
.02 A |
COPPER ALLOY |
-30 Cel |
.299 inch |
Gold (Au) - with Nickel (Ni) barrier |
LATCHED |
.02 A |
SOLDER |
E |
10 mohm |
COPPER ALLOY |
5 |
20 V |
RESISTS 15KV ESD |
20 V |
e4 |
.125 inch |
NYLON |
Rocker switches are electronic switches that are activated by rocking a lever back and forth. They are commonly used in a variety of applications, such as industrial control systems, automotive electronics, and home appliances.
Rocker switches typically consist of a housing, a rocker lever, and a set of electrical contacts. When the lever is rocked in one direction, it completes a circuit between the contacts, allowing electrical current to flow through the switch. When the lever is rocked in the opposite direction, the circuit is broken and the current stops flowing.
Rocker switches come in different configurations, including momentary, latching, and illuminated switches. Momentary switches are activated only while the lever is being held in one direction, while latching switches remain in the on or off position until manually reset. Illuminated switches include an LED or other light source to provide visual feedback when the switch is activated.