ROTARY SWITCH Rotary Switches 2,400+

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	AC Maximum Rating R Load (Contact)	Center Contact Plating	Housing Material	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	Insulation Resistance	Body Length/Diameter	Body Width	Length (Bushing)	Sealing	No. of Switch Sections	Contact Timing	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Maximum Operating Temperature	Maximum AC Contact Current	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Manufacturer Series	Contact Resistance	Diameter (Bushing)	End Contact Material	PCB Hole Count	No. of Positions	Maximum DC Contact Voltage	Additional Features	Maximum AC Contact Voltage	JESD-609 Code	Indexing Angle	Type (Bushing)	Terminal Length	Material (Actuator)
71BD36-01-2-AJN	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	DP5T	ADJUSTABLE STOP TYPE	.25A@115VAC	SILVER		500VAC	BRASS	15000 Cycle(s)	1000000000 ohm	17.45 mm		.312 inch		1		DIALLYL PHTHALATE	GOLD	19.33 mm	.25A@28VDC		.25 A	BERYLLIUM COPPER		.375 inch	GOLD OVER NICKEL	LATCHED	.25 A	SOLDER		50 mohm	.375 inch	BRASS		5	28 V	ADJUSTABLE STOP	115 V	e4	36 deg	3/8-32		STAINLESS STEEL
9001SKS11BH2	Schneider Electric Sa	ROTARY SWITCH
093121-5-02N	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED		FLAT SHAFT TYPE						10000 Cycle(s)										24.38 mm							GOLD			WIRE
44H30-04-1-12N	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP12T	SINGLE SHAFT TYPE	.075A@115VAC					10000 Cycle(s)		29.51 mm				4				61.19 mm	.25A@28VDC		.075 A				TIN	LATCHED	.25 A	SOLDER						12	28 V		115 V	e3	30 deg
44S30-06-1-12N-F	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP12T	SINGLE SHAFT TYPE	1A@115VAC					6000 Cycle(s)		29.51 mm				6				76.33 mm	1A@28VDC		1 A				TIN	LATCHED	1 A	SCREW						12	28 V		115 V	e3	30 deg
51P22-01-1-16N	Grayhill	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	SP16T	SHAFT TYPE	.15A@115VAC					25000 Cycle(s)		14.27 mm				1				13.64 mm	.2A@28VDC		.15 A				GOLD OVER NICKEL	LATCHED	.2 A	SOLDER						16	28 V		115 V	e4	22.5 deg
A40303RSCBK	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	4P3T	HIGH-FLATTED	.02A@20VAC					15000 Cycle(s)		26.19 mm			SPLASHPROOF	1				12.83 mm	.02A@20VDC	85 Cel	.02 A		-30 Cel		Gold (Au) - with Nickel (Ni) barrier	LATCHED	.02 A	SOLDER	A403					3	20 V		20 V	e4	30 deg
A40303RSCGE	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	4P3T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm			EPOXY TERMINAL SEALED	1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Gold (Au) - with Nickel (Ni) barrier	LATCHED	.35 A	SOLDER	A403					3	125 V		125 V	e4	30 deg
D8G0117N	Electro Switch	ROTARY SWITCH	PANEL MOUNT-THREADED	SP17T	SHAFT TYPE	1A@115VAC							54.77 mm				1				12.7 mm	2.25A@28VDC		1 A					MOMENTARY	2.25 A	SOLDER	D8					1	28 V		115 V		20 deg
M3SS2-10B	Abb	ROTARY SWITCH
33.4601	Schurter Ag	ROTARY SWITCH
D7C0405N	Electro Switch	ROTARY SWITCH	PANEL MOUNT-THREADED	DP6T	ROUND TYPE	2.25A@115VAC	SILVER		1500VAC	BRASS	25000 Cycle(s)	1000000000000 ohm	1.875 mm	1.719 inch			2	BREAK-BEFORE-MAKE	CERAMIC	SILVER	1.722 mm	2.25A@28VDC	125 Cel	2.25 A	BRASS	-65 Cel			LATCHED	2.25 A	SOLDER		3 mohm		BRASS		6	28 V		115 V		30 deg	3/8-32
OT30F3C	Abb	ROTARY SWITCH
212-9	Ohmite Manufacturing	ROTARY SWITCH	PANEL MOUNT	SP9T	SHAFT TYPE	20A@150VAC							57 mm				1				44.5 mm	20A@20VDC		20 A					LATCHED	20 A	SOLDER	212					9	20 V		150 V		30 deg
71AD30-01-4-AJN	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	4P3T	ADJUSTABLE STOP TYPE	.25A@115VAC					15000 Cycle(s)		17.45 mm				1				19.33 mm	.25A@28VDC		.25 A				GOLD OVER NICKEL	LATCHED	.25 A	SOLDER						3	28 V		115 V	e4	30 deg
EB3P-LSAN320-A	Idec	ROTARY SWITCH
9001KS11BH5	Schneider Electric Sa	ROTARY SWITCH
M3786/4-5186	Defense Logistics Agency	ROTARY SWITCH	PANEL MOUNT-THREADED	3P3T	FLAT SHAFT TYPE	2A@115VAC					10000 Cycle(s)		29.97 mm			EXPLOSION PROOF	2				26.04 mm	1.25A@28VDC		2 A					LATCHED	1.25 A	SOLDER						3	28 V		115 V		30 deg
50A36-01-1-05N	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP5T	SHAFT TYPE	.15A@115VAC					25000 Cycle(s)		12.7 mm				1				12.82 mm	.2A@28VDC		.15 A				GOLD OVER NICKEL	LATCHED	.2 A	SOLDER						5	28 V		115 V	e4	36 deg
71A36-12-1-10N-C	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP10T	SHAFT TYPE	.25A@115VAC					15000 Cycle(s)		17.45 mm				1				79.43 mm	.25A@28VDC		.25 A				Gold (Au) - with Nickel (Ni) barrier	LATCHED	.25 A	SOLDER						10	28 V		115 V	e4	36 deg
A10903RNMCQ	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	SP9T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm				1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Silver (Ag)	LATCHED	.35 A	SOLDER	A109					9	125 V		125 V	e4	30 deg
A10903RNMCQK	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	SP9T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm			SPLASHPROOF	1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Silver (Ag)	LATCHED	.35 A	SOLDER	A109					9	125 V		125 V	e4	30 deg
A10905RNMCQ	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	SP9T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm				1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Silver (Ag)	LATCHED	.35 A	SOLDER	A109					9	125 V		125 V	e4	30 deg
H20207RR05Q	ITT Cannon	ROTARY SWITCH	PANEL MOUNT-THREADED	DPDT	HIGH-FLATTED	12A@125VAC					10000 Cycle(s)		23.62 mm			EPOXY TERMINAL SEALED	1				6.99 mm	1A@125VDC	95 Cel	12 A		-30 Cel		Silver (Ag)	LATCHED	1 A	QUICK CONNECT	H202					2	125 V		125 V	e4	45 deg
09A30-03-1-09N	Grayhill	ROTARY SWITCH
35-524-231-R-A2-900	TE Connectivity	ROTARY SWITCH	PANEL MOUNT		LEVER												1						85 Cel			-40 Cel					SOLDER				SILVER OVER COPPER							90 deg
42A36-01-1-09N	Grayhill	ROTARY SWITCH
42A36-04-1-09N	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SPST		1A@115VAC							25.4 mm				1				52.4 mm	1A@28VDC		1 A					LATCHED	1 A	SOLDER						9	28 V		115 V		36 deg
44A30-08-1-09N	Grayhill	ROTARY SWITCH	PANEL MOUNT	SP9T	SINGLE SHAFT TYPE	1A@115VAC					6000 Cycle(s)		29.51 mm				8				93.9 mm	1A@28VDC		1 A				TIN	LATCHED	1 A	SCREW						9	28 V		115 V	e3	30 deg
51K30-01-1-09N	Grayhill	ROTARY SWITCH	PANEL MOUNT	SP9T	SHAFT TYPE	.15A@115VAC					25000 Cycle(s)		14.27 mm				1				16.71 mm	.2A@28VDC		.15 A				GOLD OVER NICKEL	LATCHED	.2 A	SOLDER						9	28 V		115 V	e4	30 deg
56P36-01-1-09S	Grayhill	ROTARY SWITCH	THROUGH HOLE-STRAIGHT		ROTARY SHAFT		SILVER OVER NICKEL	ZINC DIE CAST	600VAC	BRASS	10000 Cycle(s)	10000000000 ohm	12.7 mm		.25 inch				THERMOSET 94V-0	GOLD	12.3698 mm	0.2A@28VDC			BRASS		.375 inch		MAINTAINED	.2 A	SOLDER		100 mohm	.25 inch	BRASS	10	9	28 V	INDUSTRIAL QUALITY			36 deg	1/4-28	.11 inch	ZINC DIE CAST
56SDP30-01-1-AJN	Grayhill	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	SP12T	ADJUSTABLE STOP TYPE	.2A@115VAC	SILVER OVER NICKEL	ZINC DIE CAST		BRASS		10000000000 ohm	12.7 mm		.25 inch	SHAFT AND PANEL SEALED	1	BREAK-BEFORE-MAKE		SILVER OVER NICKEL	9.58 mm	.2A@30VDC		.2 A	BRASS		.375 inch	GOLD OVER NICKEL	LATCHED	.2 A	SOLDER		100 mohm		BRASS		12	30 V	PANEL MOUNTABLE	115 V	e4	30 deg	1/4-28	.125 inch	ZINC DIE CAST
71B30-01-1-09S	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP9T	SHAFT TYPE	.3A@115VAC					15000 Cycle(s)		17.45 mm				1				19.33 mm			.3 A				GOLD OVER NICKEL	LATCHED		SOLDER						9			115 V	e4	30 deg
71BF30-02-1-09N	Grayhill	ROTARY SWITCH
71BS30-01-1-09N	Grayhill	ROTARY SWITCH	PANEL MOUNT-THREADED	SP9T	SHAFT TYPE	.3A@115VAC					15000 Cycle(s)		17.45 mm			SHAFT AND PANEL SEALED	1				19.33 mm			.3 A				GOLD OVER NICKEL	LATCHED		SOLDER						9			115 V	e4	30 deg
71E30-02-1-09S	Grayhill	ROTARY SWITCH	PANEL MOUNT	SP9T		.3A@115VAC					15000 Cycle(s)		17.45 mm				1				24.87 mm			.3 A				GOLD OVER NICKEL	LATCHED		SCREW						9			115 V	e4	30 deg
A20315RNZQK	ITT Cannon	ROTARY SWITCH	PANEL MOUNT-THREADED	DP3T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm			SPLASHPROOF	1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Silver (Ag)	LATCHED	.35 A	SOLDER	A203					3	125 V		125 V	e4	30 deg
A20403RNCG	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	DP4T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm				1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Gold (Au) - with Nickel (Ni) barrier	LATCHED	.35 A	SOLDER	A204					4	125 V		125 V	e4	30 deg
A20403RNCQ	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	DP4T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm				1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Silver (Ag)	LATCHED	.35 A	SOLDER	A204					4	125 V		125 V	e4	30 deg
A20403RNMCBK	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	DP4T	HIGH-FLATTED	.02A@20VAC					15000 Cycle(s)		26.19 mm			SPLASHPROOF	1				12.83 mm	.02A@20VDC	85 Cel	.02 A		-30 Cel		Gold (Au) - with Nickel (Ni) barrier	LATCHED	.02 A	SOLDER	A204					4	20 V		20 V	e4	30 deg
A20403RNMCQ	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	DP4T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm				1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Silver (Ag)	LATCHED	.35 A	SOLDER	A204					4	125 V		125 V	e4	30 deg
A20403RNZG	ITT Cannon	ROTARY SWITCH	PANEL MOUNT-THREADED	DP4T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm				1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Gold (Au) - with Nickel (Ni) barrier	LATCHED	.35 A	SOLDER	A204					4	125 V		125 V	e4	30 deg
A20403RSMCQK	ITT Cannon	ROTARY SWITCH	THROUGH HOLE-STRAIGHT	DP4T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm			SPLASHPROOF	1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Silver (Ag)	LATCHED	.35 A	SOLDER	A204					4	125 V		125 V	e4	30 deg
A20403RSZQ	ITT Cannon	ROTARY SWITCH	PANEL MOUNT-THREADED	DP4T	HIGH-FLATTED	2.5A@125VAC					15000 Cycle(s)		26.19 mm				1				12.83 mm	.35A@125VDC	85 Cel	2.5 A		-30 Cel		Silver (Ag)	LATCHED	.35 A	SOLDER	A204					4	125 V		125 V	e4	30 deg
A21403RNZBE	ITT Cannon	ROTARY SWITCH	PANEL MOUNT-THREADED	DPDT	HIGH-FLATTED	.02A@20VAC					15000 Cycle(s)		26.19 mm			EPOXY TERMINAL SEALED	1				12.83 mm	.02A@20VDC	85 Cel	.02 A		-30 Cel		Gold (Au) - with Nickel (Ni) barrier	LATCHED	.02 A	SOLDER	A214					2	20 V		20 V	e4	90 deg
EU2B-YSK210FC	Idec	ROTARY SWITCH
LB1S-2LT6	Idec	ROTARY SWITCH
M2SS5-10B	Abb	ROTARY SWITCH

Rotary Switches

Rotary switches are electronic switches that are activated by rotating a dial or knob. They are commonly used in a variety of applications, such as audio equipment, industrial control systems, and consumer electronics.

Rotary switches typically consist of a housing, a dial or knob, and a set of electrical contacts. When the dial or knob is rotated, it completes a circuit between the contacts, allowing electrical current to flow through the switch. Some rotary switches also include detents or stops that provide tactile feedback as the dial is rotated.

Rotary switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Rotary switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.