HAND Slide Switches 6

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	Solderability	Center Contact Plating	Housing Material	Angle (Actuator)	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	Insulation Resistance	Packing Method	Body Length/Diameter	Body Width	Sealing	Contact Timing	Maximum Operating Force	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Washability	Maximum Operating Temperature	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Manufacturer Series	Contact Resistance	End Contact Material	PCB Hole Count	No. of Positions	Maximum DC Contact Voltage	Additional Features	JESD-609 Code	Terminal Length	Material (Actuator)
CAS-220TA	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-STRAIGHT	DPDT	SLIDE		HAND	GOLD	POLYPHENYLENE SULPHIDE	0 deg	500VAC	COPPER ALLOY		1000000000 ohm	TR, EMBOSSED, 10 INCH	5.4 mm	3.9 inch	TAPE SEALED; WATER PROOF		5 N	POLYPHENYLENESULPHIDE	GOLD	2.5 mm	.025A@24VDC		85 Cel	COPPER ALLOY	-40 Cel		Gold (Au)	LATCHED	.025 A	SOLDER		50 mohm	COPPER ALLOY		2	24 V	LOW PROFILE	e4		POLYAMIDE
CUS-12TB	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-RIGHT ANGLE	SPDT	SLIDE		HAND	GOLD	LIQUID CRYSTAL POLYMER		100VAC	COPPER ALLOY	10000 Cycle(s)	100000000 ohm		6.7056 mm	1.397 inch		BREAK-BEFORE-MAKE			GOLD	2.5908 mm	0.3A@4VDC		70 Cel	COPPER ALLOY	-20 Cel	.059 inch	Gold (Au)	LATCHED	.3 A	SOLDER		70 mohm	COPPER ALLOY		2	4 V		e4		POLYAMIDE
SSSS222700	Alps Alpine	SLIDE SWITCH	THROUGH HOLE-STRAIGHT	DPDT			HAND				500VAC		10000 Cycle(s)	100000000 ohm	BOX; BULK	9 mm	3.5 inch		BREAK-BEFORE-MAKE	1.5 N			3.5 mm	0.3A@6VDC		85 Cel		-40 Cel	.079 inch		LATCHED	.3 A	SOLDER		130 mohm		6	2	6 V			.118 inch
CMS-4202A	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-RIGHT ANGLE		SLIDE		HAND	GOLD	STEEL		500VAC	COPPER ALLOY	30000 Cycle(s)	100000000 ohm		17.8054 mm	5.4102 inch				POLYAMIDE	GOLD	4.699 mm	0.01A@50VDC		85 Cel	COPPER ALLOY	-40 Cel	.079 inch	Gold (Au)	HORIZONTAL	.01 A	SOLDER		70 mohm	COPPER ALLOY		1	50 V		e4		POLYAMIDE
78J04	Grayhill		THROUGH HOLE-STRAIGHT	SPDT	SLIDE	ON-OFF	HAND	GOLD OVER NICKEL		0 deg	500VAC	COPPER ALLOY	20000 Cycle(s)	1000000000 ohm		22.352 mm	9.652 inch		BREAK-BEFORE-MAKE		THERMOPLASTIC	GOLD OVER NICKEL	6.731 mm	0.15A@30VDC	SOLVENT	85 Cel	BRASS	-40 Cel	.05 inch	TIN-LEAD/NICKEL	VERTICAL	.15 A	SOLDER	78	100 mohm	COPPER ALLOY	16	4	30 V	ISOLATED POLES		.136 inch	THERMOPLASTIC
CMS-4202TA	Nidec Copal Electronics	SLIDE SWITCH	SURFACE MOUNT-RIGHT ANGLE		SLIDE		HAND	GOLD	STEEL		500VAC	COPPER ALLOY	30000 Cycle(s)	100000000 ohm		17.8054 mm	5.4102 inch				POLYAMIDE	GOLD	4.699 mm	0.01A@50VDC		85 Cel	COPPER ALLOY	-40 Cel	.079 inch	Gold (Au)	HORIZONTAL	.01 A	SOLDER		70 mohm	COPPER ALLOY		1	50 V		e4		POLYAMIDE

Slide Switches

Slide switches are electronic switches that are activated by sliding a lever back and forth. They are commonly used in a variety of applications, such as consumer electronics, industrial control systems, and home appliances.

Slide switches typically consist of a housing, a slider lever, and a set of electrical contacts. When the lever is slid in one direction, it completes a circuit between the contacts, allowing electrical current to flow through the switch. When the lever is slid in the opposite direction, the circuit is broken and the current stops flowing.

Slide switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Slide switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.