6PDT Slide Switches 8

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	AC Maximum Rating R Load (Contact)	Center Contact Plating	Color (Actuator)	Angle (Actuator)	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	Insulation Resistance	Packing Method	Body Length/Diameter	Body Width	Sealing	Contact Timing	Maximum Operating Force	Insulator Material	End Contact Plating	Body Height	DC Maximum Rating R Load (Contact)	Washability	Maximum Operating Temperature	Maximum AC Contact Current	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	No. of Independent Keys	Contact Resistance	Actuator Travel (mm)	End Contact Material	Maximum DC Contact Voltage	Maximum AC Contact Voltage	JESD-609 Code	Terminal Length	Material (Actuator)
6-1825011-2	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	6PDT	FLUSH TOP TYPE	ON-ON		GOLD	NATURAL				15000 Cycle(s)		TUBE	25.4 mm	7.35 inch	TAPE SEALED					4.45 mm	.3A@115VDC		80 Cel	.4 A	-40 Cel	.025 inch		LATCHED	.4 A	SOLDER	1		2.794	COPPER ALLOY	20 V				NYLON
3-1825010-7	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	6PDT	EXTENDED TOP TYPE	ON-ON	.3A@115VAC	SILVER	NATURAL				15000 Cycle(s)		TUBE	25.4 mm	7.37 inch						4.45 mm	.3A@115VDC		80 Cel	.3 A	-40 Cel	.11 inch		LATCHED	.3 A	SOLDER	1		2.794	COPPER ALLOY	28 V	115 V			NYLON
1825271-2	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	6PDT	TOP TYPE	ON-ON	.02A@20VAC	GOLD	BLACK				15000 Cycle(s)		TRAY	20 mm	9.4 inch	EPOXY TERMINAL SEALED		8.83 N			12 mm	.02A@20VDC		85 Cel	.4 A	-20 Cel	.238 inch		LATCHED	.4 A	SOLDER	1		2.0066	COPPER ALLOY	20 V	20 V			POLYOXYMETHYLENE
4-1825010-6	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	6PDT	EXTENDED SIDE TYPE	ON-ON	.3A@115VAC	SILVER	NATURAL				15000 Cycle(s)		TUBE	25.4 mm	7.37 inch						7.37 mm	.3A@115VDC		80 Cel	.3 A	-40 Cel	.11 inch		LATCHED	.3 A	SOLDER	1		2.794	COPPER ALLOY	28 V	115 V			NYLON
6-1825011-5	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	6PDT	FLUSH TOP TYPE	ON-ON	.02A@20VAC	GOLD	NATURAL				15000 Cycle(s)		TUBE	25.4 mm	7.35 inch	TAPE SEALED					4.45 mm	.02A@20VDC		80 Cel	.4 A	-40 Cel	.025 inch		LATCHED	.4 A	SOLDER	1		2.794	COPPER ALLOY	20 V	20 V			NYLON
6-1825011-4	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	6PDT	FLUSH SIDE TYPE	ON-ON		GOLD	NATURAL				15000 Cycle(s)		TUBE	25.4 mm	7.35 inch	TAPE SEALED					4.45 mm	.02A@20VDC		80 Cel	.4 A	-40 Cel			LATCHED	.4 A	SOLDER	1		2.794	COPPER ALLOY	20 V				NYLON
ASE62	TE Connectivity	SLIDE SWITCH	PANEL MOUNT	6PDT	EXTENDED TOP TYPE	ON-ON		SILVER	WHITE	0 deg	1000VRMS	COPPER ALLOY	10000 Cycle(s)	1000000000 ohm	TUBE	25.4 mm	7.37 inch		MAKE-BEFORE-BREAK		POLYESTER	SILVER	8.509 mm	.3A@115VDC	SOLVENT	100 Cel	.3 A	-20 Cel	.11 inch		LATCHED	.3 A	SOLDER	1	40 mohm		COPPER ALLOY	28 V	115 V		.16 inch	NYLON
EG6201	E-switch	SLIDE SWITCH	THROUGH HOLE-RIGHT ANGLE	6PDT												20.8 mm	6 inch						5 mm			70 Cel		-20 Cel		Silver (Ag)	LATCHED		SOLDER							e4

Slide Switches

Slide switches are electronic switches that are activated by sliding a lever back and forth. They are commonly used in a variety of applications, such as consumer electronics, industrial control systems, and home appliances.

Slide switches typically consist of a housing, a slider lever, and a set of electrical contacts. When the lever is slid in one direction, it completes a circuit between the contacts, allowing electrical current to flow through the switch. When the lever is slid in the opposite direction, the circuit is broken and the current stops flowing.

Slide switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.

Slide switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.