CHANGE-OVER Slide Switches 3
| Part | RoHS | Manufacturer | Switch Type | Mounting Feature | Switch Function | Type (Actuator) | Contact Function | Solderability | AC Maximum Rating R Load (Contact) | Center Contact Plating | Color (Actuator) | Housing Material | Body Color | Angle (Actuator) | Dielectric Withstand Volts (V) | Terminal Material | Electrical Life | DC Maximum Power Rating R Load (Contact) | Insulation Resistance | Packing Method | Body Length/Diameter | Body Width | Sealing | No. of Switch Sections | Contact Timing | Maximum Operating Force | Insulator Material | End Contact Plating | Body Height | DC Maximum Rating R Load (Contact) | Finish (Actuator) | Washability | Maximum Operating Temperature | Maximum AC Contact Current | Center Contact Material | Minimum Operating Temperature | Length (Actuator) | Terminal Finish | Switch Action | Maximum DC Contact Current | Termination Type | No. of Independent Keys | Manufacturer Series | Contact Resistance | Actuator Travel (mm) | End Contact Material | PCB Hole Count | No. of Positions | Maximum DC Contact Voltage | Additional Features | Maximum AC Contact Voltage | JESD-609 Code | Terminal Length | AC Maximum Power Rating R Load (Contact) | Material (Actuator) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Eao |
SLIDE SWITCH |
THROUGH HOLE-STRAIGHT |
CHANGE-OVER |
RAISED TYPE |
GOLD OVER NICKEL |
RED |
1000 Cycle(s) |
10000000000 ohm |
10 mm |
2.5 inch |
GOLD OVER NICKEL |
4.5 mm |
.5A@12VDC |
85 Cel |
-40 Cel |
.055 inch |
GOLD OVER NICKEL |
LATCHED |
.5 A |
SOLDER |
22 mohm |
1 |
12 V |
LOW PROFILE, PANEL MOUNTABLE |
e4 |
.197 inch |
||||||||||||||||||||||||||||
|
|
Eao |
SLIDE SWITCH |
THROUGH HOLE-RIGHT ANGLE |
CHANGE-OVER |
EXTENDED RAISED TYPE |
1000 Cycle(s) |
10 mm |
2.5 inch |
5.7 mm |
.5A@12VDC |
85 Cel |
-40 Cel |
GOLD OVER NICKEL |
LATCHED |
.5 A |
SOLDER |
12 V |
e4 |
|||||||||||||||||||||||||||||||||||||
|
|
Eao |
SLIDE SWITCH |
THROUGH HOLE-RIGHT ANGLE |
CHANGE-OVER |
FLUSH TYPE |
1000 Cycle(s) |
10 mm |
4.5 inch |
2.5 mm |
.5A@12VDC |
85 Cel |
-40 Cel |
GOLD OVER NICKEL |
LATCHED |
.5 A |
SOLDER |
12 V |
e4 |
Slide switches are electronic switches that are activated by sliding a lever back and forth. They are commonly used in a variety of applications, such as consumer electronics, industrial control systems, and home appliances.
Slide switches typically consist of a housing, a slider lever, and a set of electrical contacts. When the lever is slid in one direction, it completes a circuit between the contacts, allowing electrical current to flow through the switch. When the lever is slid in the opposite direction, the circuit is broken and the current stops flowing.
Slide switches come in different configurations, including single-pole, double-pole, and multi-pole switches. They also come in different contact arrangements, such as make-before-break, break-before-make, and center-off switches.
Slide switches offer several advantages over other types of switches. They provide a simple and intuitive means of controlling circuits, and they offer tactile feedback that can help to ensure reliable operation. They are also highly durable and can withstand frequent use and harsh environments.