SURFACE MOUNT-STRAIGHT Snap Action & Limit Switches 8

Reset All

Part	Manufacturer	Switch Type	Mounting Feature	Switch Function	Type (Actuator)	Contact Function	Center Contact Plating	Dielectric Withstand Volts (V)	Terminal Material	Electrical Life	Insulation Resistance	Packing Method	Body Length/Diameter	Body Width	Sealing	Maximum Operating Force	Insulator Material	Body Height	DC Maximum Rating R Load (Contact)	Maximum Operating Temperature	Operating Position	Center Contact Material	Minimum Operating Temperature	Length (Actuator)	Terminal Finish	Switch Action	Maximum DC Contact Current	Termination Type	Manufacturer Series	Contact Resistance	Actuator Travel (mm)	Maximum DC Contact Voltage	Additional Features	Maximum Pre Travel	JESD-609 Code	Material (Actuator)
ESE22MV21T	Panasonic	SNAP ACTING/LIMIT SWITCH	SURFACE MOUNT-STRAIGHT	SPST	LEVER					50000 Cycle(s)			5.7 mm	1.9 inch		.3 N		4.1 mm	.01A@5VDC	70 Cel			-10 Cel		Tin/Copper (Sn/Cu)	MOMENTARY	.01 A	SOLDER			4.25	5 V			e2
SPPW810201	Alps Alpine	SNAP ACTING/LIMIT SWITCH	SURFACE MOUNT-STRAIGHT	SPST						100000 Cycle(s)			5 mm	4 inch		.3 N		4 mm	.1A@30VDC	60 Cel			-10 Cel			MOMENTARY	.1 A	SOLDER				30 V
HDT0004	C & K Components	SNAP ACTING/LIMIT SWITCH	SURFACE MOUNT-STRAIGHT	SPST						100000 Cycle(s)			4.7 mm	3.8 inch		.34 N		2.3 mm	.001A@5VDC	85 Cel			-40 Cel		SILVER OVER NICKEL	MOMENTARY	.001 A	SOLDER			1.3	5 V	LOW PROFILE	.3 mm	e4
SPVQC10100	Alps Electric	SNAP ACTING/LIMIT SWITCH	SURFACE MOUNT-STRAIGHT	DPDT	PUSH PLUNGER					300000 Cycle(s)			15.4 mm	7.4 inch	WATER PROOF	1.5 N		7.5 mm	.05A@18VDC	85 Cel			-40 Cel			MOMENTARY	.05 A	SOLDER				18 V
HDT0001	C & K Components	SNAP ACTING/LIMIT SWITCH	SURFACE MOUNT-STRAIGHT	SPST			SILVER OVER NICKEL		PHOSPHOR BRONZE	100000 Cycle(s)	100000000 ohm	TR, 15 INCH	3.5 mm	2.8 inch		.34 N	POLYAMIDE46	1.95 mm	0.01A@5VDC	85 Cel	.091 inch	STAINLESS STEEL	-40 Cel	1.4 inch	SILVER OVER NICKEL	MOMENTARY	.01 A	SOLDER		500 mohm	1.05	5 V	LOW PROFILE	.3 mm	e4	POLYAMIDE46
HDT0001NP	C & K Components	SNAP ACTING/LIMIT SWITCH	SURFACE MOUNT-STRAIGHT	SPST						100000 Cycle(s)			3.5 mm	2.8 inch		.34 N		1.95 mm	.001A@5VDC	85 Cel			-40 Cel		Silver (Ag) - with Nickel (Ni) barrier	MOMENTARY	.001 A	SOLDER	HDT		1.05	5 V	LOW PROFILE	.3 mm	e4
ESE24MV1T	Panasonic	SNAP ACTING/LIMIT SWITCH	SURFACE MOUNT-STRAIGHT	SPDT	LEVER	ON-OFF-ON		100VAC		50000 Cycle(s)	100000000 ohm		7.5 mm	3 inch		.35 N		5.6 mm	.01A@5VDC	70 Cel			-10 Cel	.116 inch	Tin (Sn) over Copper (Cu)	MOMENTARY	.01 A	SOLDER		500 mohm		5 V	EMBOSSED TAPE PACKAGING
ESE11MV1T	Panasonic	SNAP ACTING/LIMIT SWITCH	SURFACE MOUNT-STRAIGHT	SPST	LEVER								6.4 mm	3 inch		.35 N		4.9 mm							SILVER	MOMENTARY		SOLDER	ESE11MV1T						e4

Snap Action & Limit Switches

Snap action switches and limit switches are electronic switches that are commonly used in industrial control systems and other applications that require precise and reliable control of mechanical processes.

Snap action switches, also known as micro switches, are electrical switches that use a spring-loaded lever to activate the switch when a certain force or pressure is applied. They are commonly used in applications where a small and precise switch is needed, such as in appliances, vending machines, and automotive control systems.

Limit switches, on the other hand, are electrical switches that are activated when a moving object, such as a conveyor belt or door, reaches a specific position or limit. They are commonly used in industrial control systems to monitor the position of mechanical components and to prevent damage or accidents caused by overrunning or overshooting.

Both snap action switches and limit switches come in a variety of configurations, including normally open or normally closed switches, and can be wired to operate in a variety of ways, such as momentary or latching operation.