24 Analog Data Transmission Interfaces 76

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	No. of Channels	Technology	Nominal Negative Supply Voltage	Maximum Supply Current	Nominal Supply Voltage	Hybrid	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Maximum Noise	Battery Supply (V)	Minimum Operating Temperature	Terminal Finish	Terminal Position	Data Rate	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Power Supply Rejection Ratio (PSRR)	Battery Feed	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
SN65LVCP1412RLHR	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	2				2.5 V		2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	QUAD		R-PQCC-N24	2	.8 mm	4 mm	Not Qualified			e4	30	260	5 mm
SN65LVCP1412RLHT	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	2				2.5 V		2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	QUAD		R-PQCC-N24	2	.8 mm	4 mm	Not Qualified			e4	30	260	5 mm
LMH0395SQE/NOPB	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	1				.078 mA	2.5 V		2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD	2970 Mbps	S-XQCC-N24	1	.8 mm	4 mm	Not Qualified			e3	30	260	4 mm
HC3-5504B-5	Intersil	SLIC	COMMERCIAL EXTENDED	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		BIPOLAR		.006 mA	5 V	2-4 CONVERSION	5/12	IN-LINE	DIP24,.6	Analog Transmission Interfaces	2.54 mm	75 Cel	5 dBrnC	-48	0 Cel	TIN LEAD	DUAL		R-PDIP-T24		6.35 mm	15.24 mm	Not Qualified	15 dB	CONSTANT CURRENT	e0			31 mm
HC3-5504B1-5	Intersil	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		6 mA		2-4 CONVERSION	5/12	IN-LINE	DIP24,.6	Analog Transmission Interfaces	2.54 mm	70 Cel	5 dBrnC	-48	0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T24				Not Qualified	15 dB	CONSTANT CURRENT	e0
73M376-CV	Texas Instruments	SLIC	COMMERCIAL	GULL WING	24	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1					5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		1.45 mm	5.6 mm	Not Qualified						7.8 mm
TCM4204AJW-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS	-5 V		5 V			IN-LINE			2.54 mm	70 Cel			0 Cel		DUAL		R-GDIP-T24		5.72 mm	15.24 mm	Not Qualified						32.05 mm
TCM4207AJ-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1			-5 V	13 mA	5 V			IN-LINE				70 Cel			0 Cel		DUAL		R-GDIP-T24				Not Qualified
TCM4204AJ-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1			-5 V	13 mA	5 V			IN-LINE				70 Cel			0 Cel		DUAL		R-GDIP-T24				Not Qualified
TCM4207AJW-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS	-5 V		5 V			IN-LINE			2.54 mm	70 Cel			0 Cel		DUAL		R-GDIP-T24		5.72 mm	15.24 mm	Not Qualified						32.05 mm
LMH0395SQ	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	1					2.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel		QUAD		S-XQCC-N24		.8 mm	4 mm	Not Qualified						4 mm
LMH0395SQ/NOPB	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	1				.078 mA	2.5 V		2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD	2970 Mbps	S-XQCC-N24	1	.8 mm	4 mm	Not Qualified			e3	30	260	4 mm
LMH0395SQX/NOPB	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	1				.078 mA	2.5 V		2.5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD	2970 Mbps	S-XQCC-N24	1	.8 mm	4 mm	Not Qualified			e3	30	260	4 mm
MAX3801UTG+	Analog Devices	LINE EQUALIZER	OTHER	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	1					3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			0 Cel	Matte Tin (Sn) - annealed	QUAD		S-XQCC-N24	1	1 mm	4 mm	Not Qualified			e3	30	260	4 mm
DL207DAA	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1								SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		1.2 mm	4.4 mm	Not Qualified						7.8 mm
PEF4268T	Infineon Technologies	SLIC		GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1								SMALL OUTLINE			1.27 mm					MATTE TIN	DUAL		R-PDSO-G24		2.65 mm	7.6 mm				e3			15.6 mm
PBL38621/2SO	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		2.65 mm	7.6 mm	Not Qualified						15.6 mm
PBL38640/2SH	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		1.99 mm	5.3 mm	Not Qualified						8.2 mm
PBL38621/2SOT	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE	SOP24,.4	Analog Transmission Interfaces	1.27 mm	85 Cel	12 dBrnC	-40 TO -58	-40 Cel		DUAL		R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	30 dB	CONSTANT CURRENT				15.4 mm
PBL38621/2SH	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		1.99 mm	5.3 mm	Not Qualified						8.2 mm
PBL38630/2SH	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		1.99 mm	5.3 mm	Not Qualified						8.2 mm
PBL38620/2SHA	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	Analog Transmission Interfaces	.635 mm	70 Cel	12 dBrnC	-40 TO -58	0 Cel	TIN LEAD	DUAL		R-PDSO-G24	3			Not Qualified	30 dB	CONSTANT CURRENT	e0		225
PBL38650/2SO	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		2.65 mm	7.6 mm	Not Qualified						15.6 mm
PBL38640/2SHT	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		2 mm	5.3 mm	Not Qualified						8.2 mm
PBL38640/2SHA	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	Analog Transmission Interfaces	.635 mm	85 Cel	12 dBrnC	-40 TO -58	-40 Cel	TIN LEAD	DUAL		R-PDSO-G24	3			Not Qualified	30 dB	RESISTIVE	e0		220
PBL38640/2SOT	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE	SOP24,.4	Analog Transmission Interfaces	1.27 mm	85 Cel	12 dBrnC	-40 TO -58	-40 Cel	TIN LEAD	DUAL		R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	30 dB	RESISTIVE	e0		220	15.4 mm
PEF4268TV12XUMA1	Infineon Technologies	SLIC		GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1								SMALL OUTLINE			1.27 mm					MATTE TIN	DUAL		R-PDSO-G24		2.65 mm	7.6 mm				e3			15.6 mm
PBL38621/2SHT	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		2 mm	5.3 mm	Not Qualified						8.2 mm
PBL38650/2SH	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		1.99 mm	5.3 mm	Not Qualified						8.2 mm
PBL38640/2SO	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		2.65 mm	7.6 mm	Not Qualified						15.6 mm
PBL38630/2SO	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		2.65 mm	7.6 mm	Not Qualified						15.6 mm
PBL38650/2SOS	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified						15.4 mm
PBL38630/2SOS	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified						15.4 mm
PBL38620/2SHT	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		2 mm	5.3 mm	Not Qualified						8.2 mm
PBL38630/2SOT	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE	SOP24,.4	Analog Transmission Interfaces	1.27 mm	85 Cel	12 dBrnC	-40 TO -58	-40 Cel	TIN LEAD	DUAL		R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	30 dB	RESISTIVE	e0		220	15.4 mm
PBL38620/2SOT	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE	SOP24,.4	Analog Transmission Interfaces	1.27 mm	70 Cel	12 dBrnC	-40 TO -58	0 Cel		DUAL		R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	30 dB	CONSTANT CURRENT				15.4 mm
PBL38620/2SH	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		1.99 mm	5.3 mm	Not Qualified						8.2 mm
PBL38630/2SHA	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	Analog Transmission Interfaces	.635 mm	85 Cel	12 dBrnC	-40 TO -58	-40 Cel		DUAL		R-PDSO-G24				Not Qualified	30 dB	RESISTIVE
PBL38650/2SHT	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		2 mm	5.3 mm	Not Qualified						8.2 mm
PBL38650/2SHA	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	Analog Transmission Interfaces	.635 mm	70 Cel	12 dBrnC	-40 TO -58	0 Cel		DUAL		R-PDSO-G24				Not Qualified	30 dB	RESISTIVE
PBL38620/2SO	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		2.65 mm	7.6 mm	Not Qualified						15.6 mm
PBL38620/2SOS	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified						15.4 mm
PEF4268TV1.2	Infineon Technologies	SLIC		GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1								SMALL OUTLINE			1.27 mm					MATTE TIN	DUAL		R-PDSO-G24		2.65 mm	7.6 mm				e3			15.6 mm
PBL38621/2SHA	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	Analog Transmission Interfaces	.635 mm	85 Cel	12 dBrnC	-40 TO -58	-40 Cel		DUAL		R-PDSO-G24	3			Not Qualified	30 dB	CONSTANT CURRENT			260
PBL38611/2SO	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR	-5 V		5 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified						15.4 mm
PBL38630/2SHT	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		2 mm	5.3 mm	Not Qualified						8.2 mm
PBL38610/2SO	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR	-5 V		5 V			SMALL OUTLINE			1.27 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified						15.4 mm
PBL38650/2SOT	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE	SOP24,.4	Analog Transmission Interfaces	1.27 mm	70 Cel	12 dBrnC	-40 TO -58	0 Cel		DUAL		R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	30 dB	RESISTIVE				15.4 mm

Analog Data Transmission Interfaces

Analog data transmission interfaces are used to transmit analog signals between electronic devices. They are commonly used in a variety of applications, such as audio and video equipment, medical devices, and industrial control systems.

Analog data transmission interfaces typically consist of a transmitter and a receiver. The transmitter converts the analog signal into a form that can be transmitted over a communication channel, such as a wire or radio frequency signal. The receiver then converts the transmitted signal back into its original analog form.

Some common types of analog data transmission interfaces include:

1. Analog audio interfaces: These are used to transmit audio signals between electronic devices, such as microphones, amplifiers, and speakers. Examples include XLR, RCA, and TRS connectors.

2. Composite video interfaces: These are used to transmit analog video signals, such as those used in standard definition television. Examples include RCA and BNC connectors.

3. VGA interfaces: These are used to transmit analog video signals from computers and other devices to displays, such as computer monitors and projectors.

4. Analog sensor interfaces: These are used to transmit analog signals from sensors, such as temperature sensors or pressure sensors, to electronic devices that can process and analyze the data.

Analog data transmission interfaces offer several advantages over digital interfaces. They are often simpler and less expensive to implement, and they can provide high-quality audio and video signals without the need for compression or conversion. However, they can also be susceptible to interference and noise, and their performance may be limited by the quality of the transmission channel.