28 Analog Data Transmission Interfaces 147
| Part | RoHS | Manufacturer | Telecom IC Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Package Body Material | Surface Mount | No. of Functions | No. of Channels | Technology | Nominal Negative Supply Voltage | Maximum Supply Current | Nominal Supply Voltage | Hybrid | Power Supplies (V) | Package Style (Meter) | Package Equivalence Code | Sub-Category | Terminal Pitch | Maximum Operating Temperature | Maximum Noise | Battery Supply (V) | Minimum Operating Temperature | Terminal Finish | Terminal Position | Data Rate | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Minimum Power Supply Rejection Ratio (PSRR) | Additional Features | Battery Feed | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Renesas Electronics |
SLIC |
OTHER |
J BEND |
28 |
QCCJ |
SQUARE |
PLASTIC/EPOXY |
YES |
1 |
BIPOLAR |
3.3 V |
2-4 CONVERSION |
CHIP CARRIER |
LDCC28,.45SQ |
1.27 mm |
85 Cel |
13 dBrnC |
+100 |
0 Cel |
MATTE TIN |
QUAD |
S-PQCC-J28 |
3 |
4.57 mm |
11.505 mm |
Not Qualified |
CONSTANT CURRENT/RESISTIVE |
e3 |
30 |
245 |
11.505 mm |
|||||||||
|
|
Renesas Electronics |
SLIC |
COMMERCIAL EXTENDED |
J BEND |
28 |
QCCJ |
SQUARE |
PLASTIC/EPOXY |
YES |
1 |
BIPOLAR |
3.3 V |
2-4 CONVERSION |
CHIP CARRIER |
LDCC28,.45SQ |
1.27 mm |
75 Cel |
13 dBrnC |
-75 |
0 Cel |
MATTE TIN |
QUAD |
S-PQCC-J28 |
3 |
4.57 mm |
11.505 mm |
CONSTANT CURRENT/RESISTIVE |
e3 |
30 |
245 |
11.505 mm |
||||||||||
|
|
Renesas Electronics |
SLIC |
INDUSTRIAL |
J BEND |
28 |
QCCJ |
SQUARE |
PLASTIC/EPOXY |
YES |
1 |
BIPOLAR |
3.3 V |
2-4 CONVERSION |
CHIP CARRIER |
LDCC28,.45SQ |
1.27 mm |
85 Cel |
13 dBrnC |
-85 |
-40 Cel |
MATTE TIN |
QUAD |
S-PQCC-J28 |
3 |
4.57 mm |
11.505 mm |
Not Qualified |
CONSTANT CURRENT/RESISTIVE |
e3 |
30 |
245 |
11.505 mm |
Analog data transmission interfaces are used to transmit analog signals between electronic devices. They are commonly used in a variety of applications, such as audio and video equipment, medical devices, and industrial control systems.
Analog data transmission interfaces typically consist of a transmitter and a receiver. The transmitter converts the analog signal into a form that can be transmitted over a communication channel, such as a wire or radio frequency signal. The receiver then converts the transmitted signal back into its original analog form.
Some common types of analog data transmission interfaces include:
1. Analog audio interfaces: These are used to transmit audio signals between electronic devices, such as microphones, amplifiers, and speakers. Examples include XLR, RCA, and TRS connectors.
2. Composite video interfaces: These are used to transmit analog video signals, such as those used in standard definition television. Examples include RCA and BNC connectors.
3. VGA interfaces: These are used to transmit analog video signals from computers and other devices to displays, such as computer monitors and projectors.
4. Analog sensor interfaces: These are used to transmit analog signals from sensors, such as temperature sensors or pressure sensors, to electronic devices that can process and analyze the data.
Analog data transmission interfaces offer several advantages over digital interfaces. They are often simpler and less expensive to implement, and they can provide high-quality audio and video signals without the need for compression or conversion. However, they can also be susceptible to interference and noise, and their performance may be limited by the quality of the transmission channel.