44 Analog Data Transmission Interfaces 38

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Nominal Negative Supply Voltage	Maximum Supply Current	Nominal Supply Voltage	Hybrid	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Maximum Noise	Battery Supply (V)	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Power Supply Rejection Ratio (PSRR)	Battery Feed	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
LE79555-2BVC	Microsemi	SLIC	COMMERCIAL	GULL WING	44	TQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS			5 V			FLATPACK, THIN PROFILE			.8 mm	70 Cel			0 Cel		QUAD	S-PQFP-G44		1.2 mm	10 mm	Not Qualified						10 mm
L3036Q	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES		BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	FLATPACK	QFP44,.5SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel		-24 TO -62	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQFP-G44				Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0
L3037TQN	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	10 mA	5 V	2-4 CONVERSION	+-5	FLATPACK	QFP44,.5SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel		-24 TO -62	-40 Cel	TIN LEAD	QUAD	S-PQFP-G44		2.45 mm	10 mm	Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0			10 mm
STLC3080	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			.0055 mA	5 V	2-4 CONVERSION	3.3,5	FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel		-48	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified	27 dB	CONSTANT CURRENT/RESISTIVE	e4			10 mm
L3037TFN	STMicroelectronics	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		-5 V	10 mA	5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel		QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified						16.5862 mm
L3036	STMicroelectronics	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES		BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC44,.7SQ	Analog Transmission Interfaces	1.27 mm	85 Cel		-24 TO -62	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44				Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0
STLC30R80	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1				5 V	2-4 CONVERSION	3.3/5	FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel	84 dBrnC	-48	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified	27 dB	CONSTANT CURRENT/RESISTIVE	e4			10 mm
STLC30R81	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	HLQFP	SQUARE	PLASTIC/EPOXY	YES	1				3.3 V	2-4 CONVERSION	3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel	84 dBrnC	-38 AND -74	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified	27 dB	CONSTANT CURRENT/RESISTIVE	e4			10 mm
L3235N	STMicroelectronics	SLIC	COMMERCIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	70 Cel		-48	0 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified		RESISTIVE	e4			10 mm
STLC3080TR	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1				5 V			FLATPACK, LOW PROFILE			.8 mm	85 Cel			-40 Cel		QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified						10 mm
L3030P	STMicroelectronics	SLIC	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES		BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC44,.7SQ	Analog Transmission Interfaces	1.27 mm	70 Cel		-48 TO 72	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44				Not Qualified		CONSTANT CURRENT/RESISTIVE	e0
L3037FNTR	STMicroelectronics	SLIC	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	10 mA	5 V			CHIP CARRIER			1.27 mm	70 Cel			0 Cel		QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified						16.5862 mm
E-STLC3075TR	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES		BCDMOS		90 mA		2-4 CONVERSION	4.5/12	FLATPACK	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel		-74	-40 Cel	MATTE TIN	QUAD	S-PQFP-G44	3			Not Qualified	26 dB	CONSTANT CURRENT	e3	30	260
L3037QN	STMicroelectronics	SLIC	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	10 mA	5 V	2-4 CONVERSION	+-5	FLATPACK	QFP44,.5SQ,32	Analog Transmission Interfaces	.8 mm	70 Cel		-24 TO -62	0 Cel	TIN LEAD	QUAD	S-PQFP-G44		2.45 mm	10 mm	Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0			10 mm
L3037FN	STMicroelectronics	SLIC	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	10 mA	5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC44,.7SQ	Analog Transmission Interfaces	1.27 mm	70 Cel		-24 TO -62	0 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0			16.5862 mm
L3035	STMicroelectronics	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES		BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC44,.7SQ	Analog Transmission Interfaces	1.27 mm	85 Cel		-24 TO -62	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44				Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0
PBL38780/1QSA	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	44	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.8 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G44		2.64 mm	7.5 mm	Not Qualified						17.83 mm
PBL38782/1QSA	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	44	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.8 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G44		2.64 mm	7.5 mm	Not Qualified						17.83 mm
PBL38785/1QSA	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	44	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.8 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G44		2.64 mm	7.5 mm	Not Qualified						17.83 mm
HA16817MP	Renesas Electronics	SLIC	COMMERCIAL	BUTT	44	QFI	RECTANGULAR	PLASTIC/EPOXY	YES	1		-48 V		5 V			FLATPACK			1.016 mm	70 Cel			0 Cel		QUAD	R-PQFP-B44		2.92 mm	11.88 mm	Not Qualified						14.42 mm
HA16817AMP	Renesas Electronics	SLIC	COMMERCIAL	BUTT	44	QFI	RECTANGULAR	PLASTIC/EPOXY	YES	1		-5 V		5 V			FLATPACK			1.016 mm	70 Cel			0 Cel		QUAD	R-PQFP-B44		2.92 mm	11.88 mm	Not Qualified						14.42 mm
HA16816MP	Renesas Electronics	SLIC	COMMERCIAL	BUTT	44	QFI	RECTANGULAR	PLASTIC/EPOXY	YES	1		-5 V		5 V			FLATPACK			1.016 mm	70 Cel			0 Cel		QUAD	R-PQFP-B44		2.92 mm	11.88 mm	Not Qualified						14.42 mm
HA16811AMP	Renesas Electronics	SLIC	COMMERCIAL	BUTT	44	QFI	RECTANGULAR	PLASTIC/EPOXY	YES	1		-5 V		5 V			FLATPACK			1.016 mm	70 Cel			0 Cel		QUAD	R-PQFP-B44		2.92 mm	11.88 mm	Not Qualified						14.42 mm
LUCL8575BP	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	BIPOLAR			5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
ATTL8560AP	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel		QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified						16.5862 mm
LUCL8567AP-DT	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL8575BP-TR	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	2	BIPOLAR			5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL8551AP	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL8551AP-TR	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL8574CP-D	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL8567AP-D	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL9310AP-DT	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS			5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL9310GP-D	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS			5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL8574DP-D	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS			5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL9310GP-DT	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS			5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL8574CP-DT	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL8574DP-DT	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS			5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm
LUCL9310AP-D	Broadcom	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS			5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified			e0	30	225	16.5862 mm

Analog Data Transmission Interfaces

Analog data transmission interfaces are used to transmit analog signals between electronic devices. They are commonly used in a variety of applications, such as audio and video equipment, medical devices, and industrial control systems.

Analog data transmission interfaces typically consist of a transmitter and a receiver. The transmitter converts the analog signal into a form that can be transmitted over a communication channel, such as a wire or radio frequency signal. The receiver then converts the transmitted signal back into its original analog form.

Some common types of analog data transmission interfaces include:

1. Analog audio interfaces: These are used to transmit audio signals between electronic devices, such as microphones, amplifiers, and speakers. Examples include XLR, RCA, and TRS connectors.

2. Composite video interfaces: These are used to transmit analog video signals, such as those used in standard definition television. Examples include RCA and BNC connectors.

3. VGA interfaces: These are used to transmit analog video signals from computers and other devices to displays, such as computer monitors and projectors.

4. Analog sensor interfaces: These are used to transmit analog signals from sensors, such as temperature sensors or pressure sensors, to electronic devices that can process and analyze the data.

Analog data transmission interfaces offer several advantages over digital interfaces. They are often simpler and less expensive to implement, and they can provide high-quality audio and video signals without the need for compression or conversion. However, they can also be susceptible to interference and noise, and their performance may be limited by the quality of the transmission channel.