TFQFP Analog Data Transmission Interfaces 4

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Nominal Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Maximum Noise	Battery Supply (V)	Minimum Operating Temperature	Terminal Position	JESD-30 Code	Maximum Seated Height	Width	Qualification	Minimum Power Supply Rejection Ratio (PSRR)	Battery Feed	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
SI3220-FQ	Silicon Labs	SLIC	COMMERCIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS	3.3 V	3.3/5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	Analog Transmission Interfaces	.5 mm	70 Cel	15 dBrnC	-15 TO -99	0 Cel	QUAD	S-PQFP-G64	1.2 mm	10 mm	Not Qualified	40 dB	CONSTANT CURRENT	NOT SPECIFIED	NOT SPECIFIED	10 mm
SI3220-FQR	Silicon Labs	SLIC	COMMERCIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS	3.3 V	3.3/5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	Analog Transmission Interfaces	.5 mm	70 Cel	15 dBrnC	-15 TO -99	0 Cel	QUAD	S-PQFP-G64	1.2 mm	10 mm	Not Qualified	40 dB	CONSTANT CURRENT	NOT SPECIFIED	NOT SPECIFIED	10 mm
SI3220-GQ	Silicon Labs	SLIC	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS	3.3 V	3.3/5	FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	Analog Transmission Interfaces	.5 mm	85 Cel	15 dBrnC	-15 TO -99	-40 Cel	QUAD	S-PQFP-G64	1.2 mm	10 mm	Not Qualified	40 dB	CONSTANT CURRENT	NOT SPECIFIED	NOT SPECIFIED	10 mm
SI3220-G-GQR	Silicon Labs	SLIC	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS	3.3 V		FLATPACK, THIN PROFILE, FINE PITCH			.5 mm	85 Cel			-40 Cel	QUAD	S-PQFP-G64	1.2 mm	10 mm	Not Qualified			40	260	10 mm

Analog Data Transmission Interfaces

Analog data transmission interfaces are used to transmit analog signals between electronic devices. They are commonly used in a variety of applications, such as audio and video equipment, medical devices, and industrial control systems.

Analog data transmission interfaces typically consist of a transmitter and a receiver. The transmitter converts the analog signal into a form that can be transmitted over a communication channel, such as a wire or radio frequency signal. The receiver then converts the transmitted signal back into its original analog form.

Some common types of analog data transmission interfaces include:

1. Analog audio interfaces: These are used to transmit audio signals between electronic devices, such as microphones, amplifiers, and speakers. Examples include XLR, RCA, and TRS connectors.

2. Composite video interfaces: These are used to transmit analog video signals, such as those used in standard definition television. Examples include RCA and BNC connectors.

3. VGA interfaces: These are used to transmit analog video signals from computers and other devices to displays, such as computer monitors and projectors.

4. Analog sensor interfaces: These are used to transmit analog signals from sensors, such as temperature sensors or pressure sensors, to electronic devices that can process and analyze the data.

Analog data transmission interfaces offer several advantages over digital interfaces. They are often simpler and less expensive to implement, and they can provide high-quality audio and video signals without the need for compression or conversion. However, they can also be susceptible to interference and noise, and their performance may be limited by the quality of the transmission channel.