RECTANGULAR Analog Data Transmission Interfaces 228

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	No. of Channels	Technology	Nominal Negative Supply Voltage	Maximum Supply Current	Nominal Supply Voltage	Hybrid	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Maximum Noise	Battery Supply (V)	Minimum Operating Temperature	Terminal Finish	Terminal Position	Data Rate	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Power Supply Rejection Ratio (PSRR)	Battery Feed	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TCM4207AJ-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1			-5 V	13 mA	5 V			IN-LINE				70 Cel			0 Cel		DUAL		R-GDIP-T24				Not Qualified
TCM4204AJ-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1			-5 V	13 mA	5 V			IN-LINE				70 Cel			0 Cel		DUAL		R-GDIP-T24				Not Qualified
DS32EV100SDX/NOPB	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	14	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	1					2.5 V		2.5/3.3	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC14,.12,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	MATTE TIN	DUAL		R-PDSO-N14	1	.8 mm	3 mm	Not Qualified			e3	30	260	4 mm
SN65LVCP1414RLJT	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	38	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	4				2.5 V		2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC38,.2X.28,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	QUAD		R-PQCC-N38	3	.8 mm	5 mm	Not Qualified			e4	30	260	7 mm
TCM4207AJW-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		CMOS	-5 V		5 V			IN-LINE			2.54 mm	70 Cel			0 Cel		DUAL		R-GDIP-T24		5.72 mm	15.24 mm	Not Qualified						32.05 mm
SN65LVCP1414RLJR	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	38	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	4				2.5 V		2.5/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC38,.2X.28,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	QUAD		R-PQCC-N38	3	.8 mm	5 mm	Not Qualified			e4	30	260	7 mm
DS64EV100SDX	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	NO LEAD	14	HVSON	RECTANGULAR	UNSPECIFIED	YES	1					2.5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	TIN LEAD	DUAL		R-XDSO-N14	1	.8 mm	3 mm	Not Qualified			e0			4 mm
LMH0024MAE/NOPB	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				.077 mA	3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	540 Mbps	R-PDSO-G16	1	1.75 mm	3.91 mm				e3	30	260	9.9 mm
LMH0024MA	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				.077 mA	3.3 V		3.3	SMALL OUTLINE	SOP16,.25	Other Telecom ICs	1.27 mm	85 Cel			-40 Cel	TIN LEAD	DUAL		R-PDSO-G16	1	1.753 mm	3.9 mm	Not Qualified			e0	20	235	9.902 mm
LMH0034MAX/NOPB	Texas Instruments	LINE EQUALIZER	OTHER	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				.077 mA	3.3 V		3.3	SMALL OUTLINE	SOP16,.25	Other Telecom ICs	1.27 mm	85 Cel			0 Cel	MATTE TIN	DUAL	1485 Mbps	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified			e3	30	260	9.9 mm
LMH0024MAX/NOPB	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				.077 mA	3.3 V		3.3	SMALL OUTLINE	SOP16,.25	Other Telecom ICs	1.27 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	540 Mbps	R-PDSO-G16	1	1.75 mm	3.91 mm	Not Qualified			e3	30	260	9.9 mm
LMH0034MA	Texas Instruments	LINE EQUALIZER	OTHER	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				.077 mA	3.3 V		3.3	SMALL OUTLINE	SOP16,.25	Other Telecom ICs	1.27 mm	85 Cel			0 Cel	TIN LEAD	DUAL	1485 Mbps	R-PDSO-G16	1	1.753 mm	3.9 mm	Not Qualified			e0	20	235	9.902 mm
LMH0024MAX	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				.077 mA	3.3 V		3.3	SMALL OUTLINE	SOP16,.25	Other Telecom ICs	1.27 mm	85 Cel			-40 Cel	TIN LEAD	DUAL		R-PDSO-G16	1	1.753 mm	3.9 mm	Not Qualified			e0	20	235	9.902 mm
LMH0024MA/NOPB	Texas Instruments	LINE EQUALIZER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				.077 mA	3.3 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	540 Mbps	R-PDSO-G16	1	1.75 mm	3.91 mm				e3	30	260	9.9 mm
LMH0034MAX	Texas Instruments	LINE EQUALIZER	OTHER	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				.077 mA	3.3 V		3.3	SMALL OUTLINE	SOP16,.25	Other Telecom ICs	1.27 mm	85 Cel			0 Cel	TIN LEAD	DUAL		R-PDSO-G16	1	1.753 mm	3.9 mm	Not Qualified			e0	20	235	9.902 mm
MAX14986ETI+	Analog Devices	LINE EQUALIZER	INDUSTRIAL	NO LEAD	28	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		BICMOS		.22 mA	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.14X.22,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-XQCC-N28	1	.85 mm	3.5 mm	Not Qualified			e3	30	260	5.5 mm
MAX14954ETO+	Analog Devices	LINE EQUALIZER	INDUSTRIAL	NO LEAD	42	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		BICMOS			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-XQCC-N42	1	.8 mm	3.5 mm				e3	30	260	9 mm
MAX14986ETI+T	Analog Devices	LINE EQUALIZER	INDUSTRIAL	NO LEAD	28	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		BICMOS		.22 mA	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.14X.22,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-XQCC-N28	1	.85 mm	3.5 mm	Not Qualified			e3	30	260	5.5 mm
MAX14950CTO+	Analog Devices	LINE EQUALIZER	COMMERCIAL	NO LEAD	42	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		BICMOS		.41 mA	3.3 V		3.3	CHIP CARRIER	LCC42,.14X.35,20	Other Telecom ICs	.5 mm	70 Cel			0 Cel	Matte Tin (Sn) - annealed	QUAD		R-PQCC-N42	1	.8 mm	3.5 mm	Not Qualified			e3	30	260	9 mm
MAX14980ETO+	Analog Devices	LINE EQUALIZER	INDUSTRIAL	NO LEAD	42	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		BICMOS		.44 mA	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC42,.14X.35,20	Other Telecom ICs	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-XQCC-N42	1	.8 mm	3.5 mm	Not Qualified			e3	30	260	9 mm
MAX14950CTO+T	Analog Devices	LINE EQUALIZER	COMMERCIAL	NO LEAD	42	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		BICMOS			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	70 Cel			0 Cel	Matte Tin (Sn) - annealed	QUAD		R-XQCC-N42	1	.8 mm	3.5 mm				e3	30	260	9 mm
MAX14980ETO+T	Analog Devices	LINE EQUALIZER	INDUSTRIAL	NO LEAD	42	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		BICMOS			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-XQCC-N42	1	.8 mm	3.5 mm				e3	30	260	9 mm
MAX14954ETO+T	Analog Devices	LINE EQUALIZER	INDUSTRIAL	NO LEAD	42	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	1		BICMOS			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-XQCC-N42	1	.8 mm	3.5 mm				e3	30	260	9 mm
MAX24104ELT+T	Analog Devices	LINE EQUALIZER	INDUSTRIAL	NO LEAD	34	QCCN	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS		305 mA	2.5 V		2.5	CHIP CARRIER	LCC34,.16X.28,20	Analog Transmission Interfaces	.5 mm	85 Cel			-40 Cel		QUAD		R-PQCC-N34				Not Qualified				NOT SPECIFIED	NOT SPECIFIED
MAX24104ELT+	Analog Devices	LINE EQUALIZER	INDUSTRIAL	BUTT	34	HLGA	RECTANGULAR	PLASTIC/EPOXY	YES	1		BICMOS			2.5 V			GRID ARRAY, HEAT SINK/SLUG			.5 mm	85 Cel			-40 Cel		BOTTOM		R-PBGA-B34		1.14 mm	4 mm					NOT SPECIFIED	NOT SPECIFIED	6.5 mm
L3000SX-VM	STMicroelectronics	SLIC	COMMERCIAL	THROUGH-HOLE	15	SIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		BIPOLAR	-5 V		5 V	2-4 CONVERSION	5	IN-LINE	SIP15,.1	Analog Transmission Interfaces	1.9 mm	70 Cel		-48 AND +72	0 Cel	TIN LEAD	SINGLE		R-PSIP-T15		17.05 mm		Not Qualified	30 dB	RESISTIVE	e0			29 mm
TDB7711	STMicroelectronics	SLIC	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR	-5 V	24 mA	5 V	2-4 CONVERSION	+-5	IN-LINE	DIP28,.6	Analog Transmission Interfaces	2.54 mm	70 Cel		-30 TO -72	0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T28				Not Qualified	20 dB	RESISTIVE	e0
L3000SX-77	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V	2-4 CONVERSION	5	SMALL OUTLINE, HEAT SINK/SLUG	SOP20,.56	Analog Transmission Interfaces	1.27 mm	120 Cel		-48 AND +72	-40 Cel	TIN LEAD	DUAL		R-PDSO-G20		3.6 mm	11 mm	Not Qualified	30 dB	RESISTIVE	e0			15.9 mm
L3000SX	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V	2-4 CONVERSION	5	SMALL OUTLINE, HEAT SINK/SLUG	SOP20,.56	Analog Transmission Interfaces	1.27 mm	120 Cel		-48 AND +72	-40 Cel	TIN LEAD	DUAL		R-PDSO-G20		3.7 mm	11 mm	Not Qualified	30 dB	RESISTIVE	e0			15.9 mm
L3845	STMicroelectronics		OTHER	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO						20 V		20	IN-LINE	DIP8,.3	Analog Transmission Interfaces	2.54 mm	70 Cel			-40 Cel	Tin/Lead (Sn/Pb)	DUAL		R-PDIP-T8				Not Qualified			e0
L3000SX-VC	STMicroelectronics	SLIC	INDUSTRIAL	THROUGH-HOLE	15	SIP	RECTANGULAR	PLASTIC/EPOXY	NO	1		BIPOLAR			5 V	2-4 CONVERSION	5	IN-LINE	SIP15,.1,75	Analog Transmission Interfaces	1.9 mm	120 Cel		-48 AND +72	-40 Cel	TIN LEAD	SINGLE		R-PSIP-T15			4.5 mm	Not Qualified	30 dB	RESISTIVE	e0			29.23 mm
TDB7722	STMicroelectronics	SLIC	COMMERCIAL	THROUGH-HOLE	15	ZIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR	-5 V	24 mA	5 V	2-4 CONVERSION	+-5	IN-LINE	ZIP15,.2,.17TB	Analog Transmission Interfaces	1.27 mm	70 Cel		-30 TO -72	0 Cel	Tin/Lead (Sn/Pb)	ZIG-ZAG		R-PZIP-T15				Not Qualified	20 dB	RESISTIVE	e0
EF7333	STMicroelectronics		COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO			MOS			5 V		5	IN-LINE	DIP28,.6	Analog Transmission Interfaces	2.54 mm	70 Cel			0 Cel	Tin/Lead (Sn/Pb)	DUAL		R-XDIP-T28				Not Qualified			e0
MC1430132DW	NXP Semiconductors	SLIC	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES						5 V		5	SMALL OUTLINE	SOP28,.4	Analog Transmission Interfaces	1.27 mm	85 Cel		-18 TO -72	-40 Cel		DUAL		R-PDSO-G28				Not Qualified		CONSTANT CURRENT
PTN3944EWY	NXP Semiconductors	LINE EQUALIZER		NO LEAD	36	HVFLGA	RECTANGULAR	PLASTIC/EPOXY	YES	1				270 mA	1.8 V			GRID ARRAY, HEAT SINK/SLUG, VERY THIN PROFILE, FINE PITCH	LCC36,.08X.24,16		.4 mm	85 Cel			-20 Cel		BOTTOM		R-PBGA-N36	3	.677 mm	2.1 mm						260	6 mm
MC34016DW	NXP Semiconductors	SLIC	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1					5 V			SMALL OUTLINE			1.27 mm	70 Cel			-20 Cel		DUAL		R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified						12.8 mm
DL207DAA	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1								SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL		R-PDSO-G24		1.2 mm	4.4 mm	Not Qualified						7.8 mm
PEF4268T	Infineon Technologies	SLIC		GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1								SMALL OUTLINE			1.27 mm					MATTE TIN	DUAL		R-PDSO-G24		2.65 mm	7.6 mm				e3			15.6 mm
PEB4265-2	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR		.0013 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE	SOP20,.56	Analog Transmission Interfaces	1.27 mm	70 Cel		-24 AND -48	0 Cel		DUAL		R-PDSO-G20		3.7 mm	11 mm	Not Qualified	25 dB	RESISTIVE				15.9 mm
PBL38611/2SHS	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR	-5 V		5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL		R-PDSO-G28		2 mm	5.3 mm	Not Qualified						10.2 mm
PBL38773/1SO	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G28		2.64 mm	7.5 mm	Not Qualified						17.83 mm
PBL38621/2SO	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		2.65 mm	7.6 mm	Not Qualified						15.6 mm
PEF4065	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			-5 V		5 V		+-5	SMALL OUTLINE, HEAT SINK/SLUG	SOP20,.56	Analog Transmission Interfaces	1.27 mm	85 Cel		-24 TO -80	-40 Cel	TIN LEAD	DUAL		R-PDSO-G20		3.7 mm	11 mm	Not Qualified	50 dB	RESISTIVE	e0			15.9 mm
PBL38640/2SH	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		1.99 mm	5.3 mm	Not Qualified						8.2 mm
PEF4365T	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	36	HSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1					3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	MATTE TIN	DUAL		R-PDSO-G36		3.5 mm	11 mm	Not Qualified			e3			15.9 mm
PBL38621/2SOT	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE	SOP24,.4	Analog Transmission Interfaces	1.27 mm	85 Cel	12 dBrnC	-40 TO -58	-40 Cel		DUAL		R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	30 dB	CONSTANT CURRENT				15.4 mm
PBL38621/2SH	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL		R-PDSO-G24		1.99 mm	5.3 mm	Not Qualified						8.2 mm
PEB4550	Infineon Technologies	SLIC		GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		BICMOS						SMALL OUTLINE, HEAT SINK/SLUG			1.27 mm						DUAL		R-PDSO-G20		3.7 mm	11 mm	Not Qualified						15.9 mm

Analog Data Transmission Interfaces

Analog data transmission interfaces are used to transmit analog signals between electronic devices. They are commonly used in a variety of applications, such as audio and video equipment, medical devices, and industrial control systems.

Analog data transmission interfaces typically consist of a transmitter and a receiver. The transmitter converts the analog signal into a form that can be transmitted over a communication channel, such as a wire or radio frequency signal. The receiver then converts the transmitted signal back into its original analog form.

Some common types of analog data transmission interfaces include:

1. Analog audio interfaces: These are used to transmit audio signals between electronic devices, such as microphones, amplifiers, and speakers. Examples include XLR, RCA, and TRS connectors.

2. Composite video interfaces: These are used to transmit analog video signals, such as those used in standard definition television. Examples include RCA and BNC connectors.

3. VGA interfaces: These are used to transmit analog video signals from computers and other devices to displays, such as computer monitors and projectors.

4. Analog sensor interfaces: These are used to transmit analog signals from sensors, such as temperature sensors or pressure sensors, to electronic devices that can process and analyze the data.

Analog data transmission interfaces offer several advantages over digital interfaces. They are often simpler and less expensive to implement, and they can provide high-quality audio and video signals without the need for compression or conversion. However, they can also be susceptible to interference and noise, and their performance may be limited by the quality of the transmission channel.