SLIC Analog Data Transmission Interfaces 391

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Nominal Negative Supply Voltage	Maximum Supply Current	Nominal Supply Voltage	Hybrid	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Maximum Noise	Battery Supply (V)	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Minimum Power Supply Rejection Ratio (PSRR)	Battery Feed	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
73M376-CV	Texas Instruments	SLIC	COMMERCIAL	GULL WING	24	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL	R-PDSO-G24		1.45 mm	5.6 mm	Not Qualified						7.8 mm
73M376-CH	Texas Instruments	SLIC	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				5 V			CHIP CARRIER			1.27 mm	70 Cel			0 Cel		QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified						11.5062 mm
TCM4205AJ	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	CMOS	-5 V		5 V		+-5	IN-LINE	DIP28,.6	Other Telecom ICs	2.54 mm	70 Cel			0 Cel		DUAL	R-GDIP-T28				Not Qualified				NOT SPECIFIED	NOT SPECIFIED
TCM4205AJ-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		-5 V	13 mA	5 V			IN-LINE			2.54 mm	70 Cel			0 Cel		DUAL	R-GDIP-T28		5.72 mm	15.24 mm	Not Qualified
TCM4204AJW-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	CMOS	-5 V		5 V			IN-LINE			2.54 mm	70 Cel			0 Cel		DUAL	R-GDIP-T24		5.72 mm	15.24 mm	Not Qualified						32.05 mm
TCM4207AJ-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		-5 V	13 mA	5 V			IN-LINE				70 Cel			0 Cel		DUAL	R-GDIP-T24				Not Qualified
TCM4204AJ-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1		-5 V	13 mA	5 V			IN-LINE				70 Cel			0 Cel		DUAL	R-GDIP-T24				Not Qualified
TCM4207AJW-00	Texas Instruments	SLIC	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1	CMOS	-5 V		5 V			IN-LINE			2.54 mm	70 Cel			0 Cel		DUAL	R-GDIP-T24		5.72 mm	15.24 mm	Not Qualified						32.05 mm
L3235	STMicroelectronics	SLIC	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	8 mA	5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC28,.5SQ	Analog Transmission Interfaces	1.27 mm	70 Cel		-48	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified			e0			11.505 mm
L3000SX-VM	STMicroelectronics	SLIC	COMMERCIAL	THROUGH-HOLE	15	SIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	BIPOLAR	-5 V		5 V	2-4 CONVERSION	5	IN-LINE	SIP15,.1	Analog Transmission Interfaces	1.9 mm	70 Cel		-48 AND +72	0 Cel	TIN LEAD	SINGLE	R-PSIP-T15		17.05 mm		Not Qualified	30 dB	RESISTIVE	e0			29 mm
L3036Q	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES		BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	FLATPACK	QFP44,.5SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel		-24 TO -62	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQFP-G44				Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0
L3037TQN	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	10 mA	5 V	2-4 CONVERSION	+-5	FLATPACK	QFP44,.5SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel		-24 TO -62	-40 Cel	TIN LEAD	QUAD	S-PQFP-G44		2.45 mm	10 mm	Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0			10 mm
STLC3080	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			.0055 mA	5 V	2-4 CONVERSION	3.3,5	FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel		-48	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified	27 dB	CONSTANT CURRENT/RESISTIVE	e4			10 mm
TDB7711	STMicroelectronics	SLIC	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		BIPOLAR	-5 V	24 mA	5 V	2-4 CONVERSION	+-5	IN-LINE	DIP28,.6	Analog Transmission Interfaces	2.54 mm	70 Cel		-30 TO -72	0 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28				Not Qualified	20 dB	RESISTIVE	e0
L3037TFN	STMicroelectronics	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1		-5 V	10 mA	5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel		QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified						16.5862 mm
L3036	STMicroelectronics	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES		BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC44,.7SQ	Analog Transmission Interfaces	1.27 mm	85 Cel		-24 TO -62	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44				Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0
L3235T	STMicroelectronics	SLIC	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	8 mA	5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC28,.5SQ	Analog Transmission Interfaces	1.27 mm	70 Cel		-48	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified			e0			11.505 mm
STLC30R80	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1				5 V	2-4 CONVERSION	3.3/5	FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel	84 dBrnC	-48	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified	27 dB	CONSTANT CURRENT/RESISTIVE	e4			10 mm
STLC30R81	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	HLQFP	SQUARE	PLASTIC/EPOXY	YES	1				3.3 V	2-4 CONVERSION	3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel	84 dBrnC	-38 AND -74	-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified	27 dB	CONSTANT CURRENT/RESISTIVE	e4			10 mm
L3235N	STMicroelectronics	SLIC	COMMERCIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	70 Cel		-48	0 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified		RESISTIVE	e4			10 mm
STLC3080TR	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1				5 V			FLATPACK, LOW PROFILE			.8 mm	85 Cel			-40 Cel		QUAD	S-PQFP-G44		1.6 mm	10 mm	Not Qualified						10 mm
L3000SX-77	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR			5 V	2-4 CONVERSION	5	SMALL OUTLINE, HEAT SINK/SLUG	SOP20,.56	Analog Transmission Interfaces	1.27 mm	120 Cel		-48 AND +72	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		3.6 mm	11 mm	Not Qualified	30 dB	RESISTIVE	e0			15.9 mm
L3000SX	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR			5 V	2-4 CONVERSION	5	SMALL OUTLINE, HEAT SINK/SLUG	SOP20,.56	Analog Transmission Interfaces	1.27 mm	120 Cel		-48 AND +72	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		3.7 mm	11 mm	Not Qualified	30 dB	RESISTIVE	e0			15.9 mm
TDB7711P	STMicroelectronics	SLIC	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES		BIPOLAR	-5 V	24 mA	5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC28,.5SQ	Analog Transmission Interfaces	1.27 mm	70 Cel		-30 TO -72	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J28				Not Qualified	20 dB	RESISTIVE	e0
L3030P	STMicroelectronics	SLIC	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES		BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC44,.7SQ	Analog Transmission Interfaces	1.27 mm	70 Cel		-48 TO 72	0 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44				Not Qualified		CONSTANT CURRENT/RESISTIVE	e0
L3037FNTR	STMicroelectronics	SLIC	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	10 mA	5 V			CHIP CARRIER			1.27 mm	70 Cel			0 Cel		QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified						16.5862 mm
L3000SX-VC	STMicroelectronics	SLIC	INDUSTRIAL	THROUGH-HOLE	15	SIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	BIPOLAR			5 V	2-4 CONVERSION	5	IN-LINE	SIP15,.1,75	Analog Transmission Interfaces	1.9 mm	120 Cel		-48 AND +72	-40 Cel	TIN LEAD	SINGLE	R-PSIP-T15			4.5 mm	Not Qualified	30 dB	RESISTIVE	e0			29.23 mm
E-STLC3075TR	STMicroelectronics	SLIC	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES		BCDMOS		90 mA		2-4 CONVERSION	4.5/12	FLATPACK	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel		-74	-40 Cel	MATTE TIN	QUAD	S-PQFP-G44	3			Not Qualified	26 dB	CONSTANT CURRENT	e3	30	260
L3037QN	STMicroelectronics	SLIC	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	10 mA	5 V	2-4 CONVERSION	+-5	FLATPACK	QFP44,.5SQ,32	Analog Transmission Interfaces	.8 mm	70 Cel		-24 TO -62	0 Cel	TIN LEAD	QUAD	S-PQFP-G44		2.45 mm	10 mm	Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0			10 mm
L3037FN	STMicroelectronics	SLIC	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V	10 mA	5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC44,.7SQ	Analog Transmission Interfaces	1.27 mm	70 Cel		-24 TO -62	0 Cel	TIN LEAD	QUAD	S-PQCC-J44		4.57 mm	16.5862 mm	Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0			16.5862 mm
TDB7722	STMicroelectronics	SLIC	COMMERCIAL	THROUGH-HOLE	15	ZIP	RECTANGULAR	PLASTIC/EPOXY	NO		BIPOLAR	-5 V	24 mA	5 V	2-4 CONVERSION	+-5	IN-LINE	ZIP15,.2,.17TB	Analog Transmission Interfaces	1.27 mm	70 Cel		-30 TO -72	0 Cel	Tin/Lead (Sn/Pb)	ZIG-ZAG	R-PZIP-T15				Not Qualified	20 dB	RESISTIVE	e0
L3035	STMicroelectronics	SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES		BIPOLAR	-5 V		5 V	2-4 CONVERSION	+-5	CHIP CARRIER	LDCC44,.7SQ	Analog Transmission Interfaces	1.27 mm	85 Cel		-24 TO -62	-40 Cel	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44				Not Qualified	20 dB	CONSTANT CURRENT/RESISTIVE	e0
MC1430132DW	NXP Semiconductors	SLIC	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES					5 V		5	SMALL OUTLINE	SOP28,.4	Analog Transmission Interfaces	1.27 mm	85 Cel		-18 TO -72	-40 Cel		DUAL	R-PDSO-G28				Not Qualified		CONSTANT CURRENT
MC34016DW	NXP Semiconductors	SLIC	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				5 V			SMALL OUTLINE			1.27 mm	70 Cel			-20 Cel		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified						12.8 mm
DL207DAA	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1							SMALL OUTLINE, THIN PROFILE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL	R-PDSO-G24		1.2 mm	4.4 mm	Not Qualified						7.8 mm
PEF4268T	Infineon Technologies	SLIC		GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1							SMALL OUTLINE			1.27 mm					MATTE TIN	DUAL	R-PDSO-G24		2.65 mm	7.6 mm				e3			15.6 mm
PEB4265-2	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR		.0013 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE	SOP20,.56	Analog Transmission Interfaces	1.27 mm	70 Cel		-24 AND -48	0 Cel		DUAL	R-PDSO-G20		3.7 mm	11 mm	Not Qualified	25 dB	RESISTIVE				15.9 mm
PBL38611/2SHS	Infineon Technologies	SLIC	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V		5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	70 Cel			0 Cel		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified						10.2 mm
PBL38773/1SO	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G28		2.64 mm	7.5 mm	Not Qualified						17.83 mm
PBL38621/2SO	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR			5 V			SMALL OUTLINE			1.27 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G24		2.65 mm	7.6 mm	Not Qualified						15.6 mm
PEF4065	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		-5 V		5 V		+-5	SMALL OUTLINE, HEAT SINK/SLUG	SOP20,.56	Analog Transmission Interfaces	1.27 mm	85 Cel		-24 TO -80	-40 Cel	TIN LEAD	DUAL	R-PDSO-G20		3.7 mm	11 mm	Not Qualified	50 dB	RESISTIVE	e0			15.9 mm
PBL38665/2QNS	Infineon Technologies	SLIC	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR	-5 V		5 V			CHIP CARRIER			1.27 mm	85 Cel			-40 Cel		QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified						11.5062 mm
PEF4265-2V	Infineon Technologies	SLIC	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1				3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD	S-PQCC-N48		.9 mm	7 mm	Not Qualified			e3			7 mm
PBL38640/2SH	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G24		1.99 mm	5.3 mm	Not Qualified						8.2 mm
PEF4365T	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	36	HSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1				3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH			.65 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G36		3.5 mm	11 mm	Not Qualified			e3			15.9 mm
PBL38621/2SOT	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR		.004 mA	5 V	2-4 CONVERSION	5	SMALL OUTLINE	SOP24,.4	Analog Transmission Interfaces	1.27 mm	85 Cel	12 dBrnC	-40 TO -58	-40 Cel		DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	30 dB	CONSTANT CURRENT				15.4 mm
PBL38621/2SH	Infineon Technologies	SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR			5 V			SMALL OUTLINE, SHRINK PITCH			.65 mm	85 Cel			-40 Cel		DUAL	R-PDSO-G24		1.99 mm	5.3 mm	Not Qualified						8.2 mm
PEB4550	Infineon Technologies	SLIC		GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BICMOS						SMALL OUTLINE, HEAT SINK/SLUG			1.27 mm						DUAL	R-PDSO-G20		3.7 mm	11 mm	Not Qualified						15.9 mm

Analog Data Transmission Interfaces

Analog data transmission interfaces are used to transmit analog signals between electronic devices. They are commonly used in a variety of applications, such as audio and video equipment, medical devices, and industrial control systems.

Analog data transmission interfaces typically consist of a transmitter and a receiver. The transmitter converts the analog signal into a form that can be transmitted over a communication channel, such as a wire or radio frequency signal. The receiver then converts the transmitted signal back into its original analog form.

Some common types of analog data transmission interfaces include:

1. Analog audio interfaces: These are used to transmit audio signals between electronic devices, such as microphones, amplifiers, and speakers. Examples include XLR, RCA, and TRS connectors.

2. Composite video interfaces: These are used to transmit analog video signals, such as those used in standard definition television. Examples include RCA and BNC connectors.

3. VGA interfaces: These are used to transmit analog video signals from computers and other devices to displays, such as computer monitors and projectors.

4. Analog sensor interfaces: These are used to transmit analog signals from sensors, such as temperature sensors or pressure sensors, to electronic devices that can process and analyze the data.

Analog data transmission interfaces offer several advantages over digital interfaces. They are often simpler and less expensive to implement, and they can provide high-quality audio and video signals without the need for compression or conversion. However, they can also be susceptible to interference and noise, and their performance may be limited by the quality of the transmission channel.