INDUSTRIAL Audio Codecs 506

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Output Code	No. of Channels	Technology	Nominal Negative Supply Voltage	Operating Mode	Maximum Supply Current	Nominal Supply Voltage	Input Code	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Resolution (um)	Minimum Operating Temperature	Maximum Gain Tolerance	Terminal Finish	Maximum Output Voltage	Terminal Position	JESD-30 Code	Output (V)	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Linear Coding	Width	Qualification	Companding Law	Input Type	Additional Features	Maximum Analog Input	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Filter
TCM129C17AN	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	13 mA	5 V		+-5	IN-LINE	DIP16,.3	Codecs	2.54 mm	85 Cel		-40 Cel	.08 dB			DUAL	R-PDIP-T16			5.08 mm	NOT AVAILABLE	7.62 mm	Not Qualified	A-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	YES
TCM129C14ADWR	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	13 mA	5 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel				DUAL	R-PDSO-G24			2.65 mm		7.5 mm	Not Qualified	A/MU-LAW		FULL DUPLEX					15.4 mm	YES
TCM129C16DW	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS	13 mA	5 V		+-5	SMALL OUTLINE	SOP16,.4	Codecs	1.27 mm	85 Cel		-40 Cel	.08 dB			DUAL	R-PDSO-G16			2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	MU-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	10.3 mm	YES
TLC32044IFN	Texas Instruments	PCM CODEC	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	40 mA	5 V		+-5	CHIP CARRIER	LDCC28,.5SQ	Codecs	1.27 mm	85 Cel		-40 Cel				QUAD	S-PQCC-J28			4.57 mm	14-BIT	11.5062 mm	Not Qualified						NOT SPECIFIED	NOT SPECIFIED	11.5062 mm	YES
TLC32042IFN	Texas Instruments	PCM CODEC	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	40 mA	5 V		+-5	CHIP CARRIER	LDCC28,.5SQ	Codecs	1.27 mm	85 Cel		-40 Cel				QUAD	S-PQCC-J28			4.57 mm	14-BIT	11.5062 mm	Not Qualified						NOT SPECIFIED	NOT SPECIFIED	11.5062 mm	YES
TWL6040A3ZBHR	Texas Instruments	PCM CODEC	INDUSTRIAL	BALL	120	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1		8			SYNCHRONOUS		2.1 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA120,11X11,20		.5 mm	85 Cel		-40 Cel		TIN SILVER COPPER		BOTTOM	S-PBGA-B120		3	1 mm		6 mm			DIFFERENTIAL			e1	30	260	6 mm	NO
TLC32041IFN	Texas Instruments	PCM CODEC	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	40 mA	5 V		+-5	CHIP CARRIER	LDCC28,.5SQ	Codecs	1.27 mm	85 Cel		-40 Cel				QUAD	S-PQCC-J28			4.57 mm	14-BIT	11.5062 mm	Not Qualified						NOT SPECIFIED	NOT SPECIFIED	11.5062 mm	YES
TP13057BJ	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	10 mA	5 V		+-5	IN-LINE	DIP16,.3	Codecs	2.54 mm	85 Cel		-40 Cel	.15 dB			DUAL	R-GDIP-T16			5.08 mm	NOT AVAILABLE	7.62 mm	Not Qualified	A-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	19.56 mm	YES
TCM129C16N-00	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1				-5 V	SYNCHRONOUS	13 mA	5 V			IN-LINE			2.54 mm	85 Cel		-40 Cel				DUAL	R-PDIP-T16			5.08 mm		7.62 mm	Not Qualified	MU-LAW		FULL DUPLEX					19.305 mm	YES
TCM129C17ADW	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	13 mA	5 V		+-5	SMALL OUTLINE	SOP16,.4	Codecs	1.27 mm	85 Cel		-40 Cel	.08 dB			DUAL	R-PDSO-G16			2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	A-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	10.3 mm	YES
TP13054BN	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	10 mA	5 V		+-5	IN-LINE	DIP16,.3	Codecs	2.54 mm	85 Cel		-40 Cel	.15 dB	NICKEL PALLADIUM GOLD		DUAL	R-PDIP-T16			5.08 mm	NOT AVAILABLE	7.62 mm	Not Qualified	MU-LAW		FULL DUPLEX		e4			19.305 mm	YES
TCM37C15AIDW	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS		5 V		+-5	SMALL OUTLINE	SOP20,.4	Codecs	1.27 mm	85 Cel		-40 Cel	.2 dB			DUAL	R-PDSO-G20			2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	A-LAW					NOT SPECIFIED	NOT SPECIFIED	12.8 mm	YES
TLC32040IFNR	Texas Instruments	PCM CODEC	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				-5 V	SYNCHRONOUS/ASYNCHRONOUS	40 mA	5 V			CHIP CARRIER			1.27 mm	85 Cel		-40 Cel				QUAD	S-PQCC-J28			4.57 mm		11.5062 mm	Not Qualified								11.5062 mm	YES
TLC32042EFN	Texas Instruments	PCM CODEC	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			CMOS	-5 V			5 V		+-5	CHIP CARRIER	LDCC28,.5SQ	Codecs	1.27 mm	85 Cel		-40 Cel				QUAD	S-PQCC-J28				14-BIT		Not Qualified									YES
TCM129C16J	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	13 mA	5 V		+-5	IN-LINE	DIP16,.3	Codecs	2.54 mm	85 Cel		-40 Cel	.08 dB			DUAL	R-GDIP-T16			5.08 mm	NOT AVAILABLE	7.62 mm	Not Qualified	MU-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	19.56 mm	YES
TCM129C17J-00	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1				-5 V	SYNCHRONOUS	13 mA	5 V			IN-LINE			2.54 mm	85 Cel		-40 Cel				DUAL	R-GDIP-T16			5.08 mm		7.62 mm	Not Qualified	A-LAW		FULL DUPLEX					19.56 mm	YES
TCM129C14DWR	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS	13 mA	5 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel				DUAL	R-PDSO-G24			2.65 mm		7.5 mm	Not Qualified	A/MU-LAW		FULL DUPLEX					15.4 mm	YES
TP13057ADW	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	10 mA	5 V		+-5	SMALL OUTLINE	SOP16,.4	Codecs	1.27 mm	85 Cel		-40 Cel	.15 dB	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16		1	2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	A-LAW		FULL DUPLEX		e4	30	260	10.3 mm	YES
TP13054ADWR	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	10 mA	5 V		+-5	SMALL OUTLINE	SOP16,.4	Codecs	1.27 mm	85 Cel		-40 Cel	.15 dB	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16		1	2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	MU-LAW		FULL DUPLEX		e4	30	260	10.3 mm	YES
TCM129C18N	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	14 mA	5 V		+-5	IN-LINE	DIP16,.3	Codecs	2.54 mm	85 Cel		-40 Cel	2.5 dB			DUAL	R-PDIP-T16			5.08 mm	NOT AVAILABLE	7.62 mm	Not Qualified	MU-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	YES
TWL6040A2ZQZ	Texas Instruments	PCM CODEC	INDUSTRIAL	BALL	120	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1		8			SYNCHRONOUS		2.1 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA120,11X11,20		.5 mm					TIN SILVER COPPER		BOTTOM	S-PBGA-B120		3	1 mm		6 mm	Not Qualified		DIFFERENTIAL			e1	30	260	6 mm	NO
TCM129C14JW-00	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1				-5 V	ASYNCHRONOUS	13 mA	5 V			IN-LINE			2.54 mm	85 Cel		-40 Cel				DUAL	R-GDIP-T24			5.715 mm		15.24 mm	Not Qualified	A/MU-LAW		FULL DUPLEX					32.05 mm	YES
TCM38C17DGG	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	4			CMOS				5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Codecs	.5 mm	85 Cel		-40 Cel	.18 dB			DUAL	R-PDSO-G48				NOT AVAILABLE		Not Qualified	A/MU-LAW								YES
TP13054BDW	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	10 mA	5 V		+-5	SMALL OUTLINE	SOP16,.4	Codecs	1.27 mm	85 Cel		-40 Cel	.15 dB	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G16		1	2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	MU-LAW		FULL DUPLEX		e4	30	260	10.3 mm	YES
TP13067BDWR	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	11 mA	5 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel				DUAL	R-PDSO-G20			2.65 mm		7.5 mm	Not Qualified	A-LAW		FULL DUPLEX					12.8 mm	YES
TWL6040A3SRSZQZR	Texas Instruments	PCM CODEC	INDUSTRIAL	BALL	120	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1		8			SYNCHRONOUS		2.1 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA120,11X11,20		.5 mm					TIN SILVER COPPER		BOTTOM	S-PBGA-B120		3	1 mm		6 mm			DIFFERENTIAL			e1	30	260	6 mm	NO
TLVAIC3101IRHBRG4	Texas Instruments	PCM CODEC	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1					SYNCHRONOUS		1.8 V			CHIP CARRIER			.5 mm	85 Cel		-40 Cel		NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32		2	1 mm		5 mm	Not Qualified					e4	30	260	5 mm	YES
TCM129C23DWR	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	13 mA	5 V		+-5	SMALL OUTLINE	SOP20,.4	Codecs	1.27 mm	85 Cel		-40 Cel	.5 dB			DUAL	R-PDSO-G20			2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	A/MU-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	12.8 mm	YES
TLVAIC12KIRHBTG4	Texas Instruments	PROGRAMMABLE CODEC	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1	TWOS COMPLEMENT	2	CMOS		SYNCHRONOUS		1.8 V	TWOS COMPLEMENT	1.8,3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Codecs	.5 mm	85 Cel	16	-40 Cel		NICKEL PALLADIUM GOLD	2.35 V	QUAD	S-PQCC-N32	VOLTAGE	2	1 mm		5 mm	Not Qualified		SINGLE-ENDED/DIFF	IT ALSO REQUIRES 3.3V ANALOG SUPPLY	2 V	e4	30	260	5 mm	YES
HPA01179IRSBR	Texas Instruments	PCM CODEC	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1					SYNCHRONOUS		1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.4 mm	85 Cel		-40 Cel		NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N40		2	.8 mm		5 mm						e4	30	260	5 mm	YES
LM49352RL	Texas Instruments	PCM CODEC	INDUSTRIAL	BALL	36	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1					SYNCHRONOUS		1.8 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH			.5 mm	85 Cel		-40 Cel				BOTTOM	S-PBGA-B36			.725 mm		3.281 mm	Not Qualified	A/MU-LAW		IT ALSO OPERATES AT 3.3V ANALOG SUPPLY					3.281 mm	YES
TCM37C14ADW	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V			5 V		+-5	SMALL OUTLINE	SOP24,.4	Codecs	1.27 mm	85 Cel		-40 Cel	.2 dB			DUAL	R-PDSO-G24				NOT AVAILABLE		Not Qualified	A/MU-LAW								YES
TP13057BFNR	Texas Instruments	PCM CODEC	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				-5 V	SYNCHRONOUS/ASYNCHRONOUS	10 mA	5 V			CHIP CARRIER			1.27 mm	85 Cel		-40 Cel				QUAD	S-PQCC-J20			4.57 mm		8.9662 mm	Not Qualified	A-LAW		FULL DUPLEX					8.9662 mm	YES
TCM129C18DW	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	14 mA	5 V		+-5	SMALL OUTLINE	SOP16,.4	Codecs	1.27 mm	85 Cel		-40 Cel	2.5 dB			DUAL	R-PDSO-G16			2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	MU-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	10.3 mm	YES
TCM38C17IDL	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS		SYNCHRONOUS		5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP48,.4	Codecs	.635 mm	85 Cel		-40 Cel	.18 dB	NICKEL PALLADIUM GOLD		DUAL	R-PDSO-G48		3	2.794 mm	NOT AVAILABLE	7.5 mm	Not Qualified	A/MU-LAW		FULL-DUPLEX		e4	30	260	15.875 mm	YES
TCM129C13ADY	Texas Instruments	PCM CODEC	INDUSTRIAL	J BEND	20	SOJ	RECTANGULAR	PLASTIC/EPOXY	YES	1				-5 V	SYNCHRONOUS/ASYNCHRONOUS	13 mA	5 V			SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel				DUAL	R-PDSO-J20			3.56 mm		7.51 mm	Not Qualified	A/MU-LAW		FULL DUPLEX					12.825 mm	YES
TCM129C14JW	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	13 mA	5 V		+-5	IN-LINE	DIP24,.6	Codecs	2.54 mm	85 Cel		-40 Cel				DUAL	R-GDIP-T24			5.715 mm	NOT AVAILABLE	15.24 mm	Not Qualified	A/MU-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	32.05 mm	YES
TCM129C19DW	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	14 mA	5 V		+-5	SMALL OUTLINE	SOP16,.4	Codecs	1.27 mm	85 Cel		-40 Cel	2.5 dB			DUAL	R-PDSO-G16			2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	MU-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	10.3 mm	YES
TCM37C15AN	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1			CMOS	-5 V			5 V		+-5	IN-LINE	DIP20,.3	Codecs	2.54 mm	85 Cel		-40 Cel	.2 dB			DUAL	R-PDIP-T20				NOT AVAILABLE		Not Qualified	A-LAW								YES
TLVAIC3105IRHBRG4	Texas Instruments	PCM CODEC	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1					SYNCHRONOUS		1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE			.5 mm	85 Cel		-40 Cel		NICKEL PALLADIUM GOLD		QUAD	S-PQCC-N32		2	1 mm		5 mm	Not Qualified			IT ALSO REQUIRES 3.3V ANALOG SUPPLY		e4	30	260	5 mm	YES
TP13054BFN	Texas Instruments	PCM CODEC	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1				-5 V	SYNCHRONOUS/ASYNCHRONOUS	10 mA	5 V			CHIP CARRIER			1.27 mm	85 Cel		-40 Cel				QUAD	S-PQCC-J20			4.57 mm		8.9662 mm	Not Qualified	MU-LAW		FULL DUPLEX					8.9662 mm	YES
TP13067AJ	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO	1			CMOS	-5 V		11 mA	5 V		+-5	IN-LINE	DIP20,.3	Codecs	2.54 mm	85 Cel		-40 Cel	.15 dB			DUAL	R-XDIP-T20				NOT AVAILABLE		Not Qualified	A-LAW								YES
TP13064BN	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	11 mA	5 V		+-5	IN-LINE	DIP20,.3	Codecs	2.54 mm	85 Cel		-40 Cel	.15 dB			DUAL	R-PDIP-T20			5.08 mm	NOT AVAILABLE	7.62 mm	Not Qualified	MU-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	24.325 mm	YES
PCM3052ARTF	Texas Instruments	PCM CODEC	INDUSTRIAL	NO LEAD	32	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	1	TWOS COMPLEMENT	2	CMOS		SYNCHRONOUS	15 mA	3.3 V	TWOS COMPLEMENT		CHIP CARRIER, VERY THIN PROFILE			.5 mm	85 Cel	24	-40 Cel		NICKEL PALLADIUM GOLD		QUAD	R-PQCC-N32	VOLTAGE	1	.95 mm		5.2 mm	Not Qualified		"SINGLE-ENDED,DIFF"		5 V	e4	30	260	6.2 mm	YES
TCM129C17DW	Texas Instruments	PCM CODEC	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			CMOS	-5 V	SYNCHRONOUS	13 mA	5 V		+-5	SMALL OUTLINE	SOP16,.4	Codecs	1.27 mm	85 Cel		-40 Cel	.08 dB			DUAL	R-PDSO-G16			2.65 mm	NOT AVAILABLE	7.5 mm	Not Qualified	A-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	10.3 mm	YES
TCM129C17N-00	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1				-5 V	SYNCHRONOUS	13 mA	5 V			IN-LINE			2.54 mm	85 Cel		-40 Cel				DUAL	R-PDIP-T16			5.08 mm		7.62 mm	Not Qualified	A-LAW		FULL DUPLEX					19.305 mm	YES
TCM129C16AN	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1			CMOS	-5 V	SYNCHRONOUS/ASYNCHRONOUS	13 mA	5 V		+-5	IN-LINE	DIP16,.3	Codecs	2.54 mm	85 Cel		-40 Cel	.08 dB			DUAL	R-PDIP-T16			5.08 mm	NOT AVAILABLE	7.62 mm	Not Qualified	MU-LAW		FULL DUPLEX			NOT SPECIFIED	NOT SPECIFIED	19.305 mm	YES
TP13054BJ	Texas Instruments	PCM CODEC	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	1				-5 V	SYNCHRONOUS/ASYNCHRONOUS	10 mA	5 V			IN-LINE			2.54 mm	85 Cel		-40 Cel				DUAL	R-GDIP-T16			5.08 mm		7.62 mm	Not Qualified	MU-LAW		FULL DUPLEX					19.56 mm	YES

Audio Codecs

Audio codecs are hardware or software components used to encode and decode digital audio signals. They are commonly used in a variety of applications, such as music production, voice communication, and digital audio broadcasting.

Audio codecs typically use a mathematical algorithm to convert analog audio signals into digital form, and vice versa. They can also compress and decompress digital audio signals to reduce their size and increase transmission efficiency.

Some common types of audio codecs include:

1. Pulse Code Modulation (PCM): This is a standard method of digitally representing analog audio signals. It samples the audio signal at regular intervals and records the amplitude of each sample as a binary number.

2. Adaptive Differential Pulse Code Modulation (ADPCM): This is a type of audio compression that reduces the size of digital audio files by removing redundant information. It achieves this by recording only the differences between adjacent samples, rather than recording each sample individually.

3. MPEG Audio Codecs: These are a family of audio compression algorithms developed by the Moving Picture Experts Group. They are commonly used in digital audio broadcasting and music production.

4. Dolby Digital: This is a popular audio codec used for home theater and digital television systems. It provides high-quality surround sound and is commonly used in DVD and Blu-ray discs.