SQUARE Digital Transmission Interfaces 565

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Supply Voltage	Hybrid	Power Supplies (V)	ISDN Access Rate	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Battery Supply (V)	Minimum Output High Voltage	Maximum Output Low Voltage	Standard	Minimum Operating Temperature	Terminal Finish	Terminal Position	Data Rate	JESD-30 Code	Reference Point	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Carrier Type-1	Width	Qualification	Maximum Output Low Current	Minimum Power Supply Rejection Ratio (PSRR)	Battery Feed	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
DS21552L+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		5		FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs	.5 mm	70 Cel					0 Cel	MATTE TIN	QUAD		S-PQFP-G100		3	1.6 mm	T-1(DS1)	14 mm	Not Qualified				e3	30	260	14 mm
DS21352LN+	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs	.5 mm	85 Cel					-40 Cel	MATTE TIN	QUAD		S-PQFP-G100		3	1.6 mm	T-1(DS1)	14 mm	Not Qualified				e3	30	260	14 mm
DS21448N	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	BALL	144	BGA	SQUARE	PLASTIC/EPOXY	YES	1		.4 mA	3.3 V		3.3		GRID ARRAY	BGA144,12X12,50	Digital Transmission Interfaces	1.27 mm	85 Cel					-40 Cel	TIN LEAD	BOTTOM		S-PBGA-B144			2.22 mm		17 mm	Not Qualified				e0			17 mm
DS2149Q+T&R	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			5 V		5		CHIP CARRIER	LDCC28,.5SQ	Digital Transmission Interfaces	1.27 mm	70 Cel					0 Cel	MATTE TIN	QUAD		S-PQCC-J28		1	4.57 mm		11.5062 mm	Not Qualified				e3		245	11.5062 mm
DS21354LC1+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	70 Cel					0 Cel	MATTE TIN	QUAD		S-PQFP-G100		3	1.6 mm		14 mm	Not Qualified				e3	30	260	14 mm
DS21554L+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		5		FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs	.5 mm	70 Cel					0 Cel	MATTE TIN	QUAD		S-PQFP-G100		3	1.6 mm	CEPT PCM-30/E-1	14 mm	Not Qualified				e3	30	260	14 mm
MTC-20276PC-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				CHIP CARRIER			1.27 mm	70 Cel					0 Cel		QUAD		S-PQCC-J44			4.57 mm		16.5862 mm	Not Qualified							16.5862 mm
MTC-20277PQ-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				FLATPACK			.8 mm	85 Cel					-40 Cel		QUAD		S-PQFP-G44			2.45 mm		10 mm	Not Qualified							10 mm
MTC-20285	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	144	QFP	SQUARE	PLASTIC/EPOXY	YES	1							FLATPACK			.65 mm	70 Cel					0 Cel		QUAD		S-PQFP-G144			3.91 mm		28 mm	Not Qualified							28 mm
MTC-20232PQ-I	Onsemi	DIGITAL SLIC		GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES								FLATPACK, LOW PROFILE			.8 mm								QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified							10 mm
MTC-20285-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	144	QFP	SQUARE	PLASTIC/EPOXY	YES	1							FLATPACK			.65 mm	85 Cel					-40 Cel		QUAD		S-PQFP-G144			3.91 mm		28 mm	Not Qualified							28 mm
MTC-20277-PCINTT	Onsemi	ISDN CONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V				CHIP CARRIER			1.27 mm	85 Cel					-40 Cel		QUAD		S-PQCC-J44			4.57 mm		16.5862 mm	Not Qualified							16.5862 mm
MTC-20232PQ-C	Onsemi	DIGITAL SLIC		GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES								FLATPACK, LOW PROFILE			.8 mm								QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified							10 mm
MTC-20276PC-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				CHIP CARRIER			1.27 mm	85 Cel					-40 Cel		QUAD		S-PQCC-J44			4.57 mm		16.5862 mm	Not Qualified							16.5862 mm
MTC-20276PQ-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				FLATPACK			.8 mm	70 Cel					0 Cel		QUAD		S-PQFP-G44			2.45 mm		10 mm	Not Qualified							10 mm
MTC-20277PC-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				CHIP CARRIER			1.27 mm	70 Cel					0 Cel		QUAD		S-PQCC-J44			4.57 mm		16.585 mm	Not Qualified							16.585 mm
MTC-20276-PCINTQ	Onsemi	ISDN CONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V				CHIP CARRIER			1.27 mm	85 Cel					-40 Cel		QUAD		S-PQCC-J44			4.57 mm		16.5862 mm	Not Qualified							16.5862 mm
MTC-20172-PC	Onsemi	ISDN CONTROLLER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			5 V				CHIP CARRIER				70 Cel					0 Cel		QUAD		S-PQCC-J28						Not Qualified
MTC-20277PQ-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				FLATPACK			.8 mm	70 Cel					0 Cel		QUAD		S-PQFP-G44			2.45 mm		10 mm	Not Qualified							10 mm
MTC-20276PQ-I	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				FLATPACK			.8 mm	70 Cel					0 Cel		QUAD		S-PQFP-G44			2.45 mm		10 mm	Not Qualified							10 mm
MTC-20276-PQINTQ	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V				FLATPACK			.8 mm	85 Cel					-40 Cel		QUAD		S-PQFP-G44			2.35 mm		10 mm	Not Qualified							10 mm
MTC-20277PC-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				CHIP CARRIER			1.27 mm	85 Cel					-40 Cel		QUAD		S-PQCC-J44			4.57 mm		16.585 mm	Not Qualified							16.585 mm
STLC3075	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.09 mA	6 V	2-4 CONVERSION	4.5/12		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel					-40 Cel	NICKEL PALLADIUM GOLD	QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT	e4			10 mm
STLC5412FN	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		5	BASIC	CHIP CARRIER	LDCC44,.7SQ	Digital Transmission Interfaces	1.27 mm	85 Cel		2.4 V	.4 V	ANSI T1.601	-40 Cel	TIN LEAD	QUAD	.16 Mbps	S-PQCC-J44	U		4.57 mm		16.5862 mm	Not Qualified	7 Amp			e0			16.5862 mm
STLC3055QTR	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.14 mA	6 V	2-4 CONVERSION	5.5/14.5		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel					-40 Cel	NICKEL PALLADIUM GOLD	QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT	e4			10 mm
E-STLC3095	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.09 mA	6 V	2-4 CONVERSION	4.5/12		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel	-64				-40 Cel		QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT				10 mm
ST20184	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		2.5,3.3,5		FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs	.5 mm	85 Cel					-40 Cel	NICKEL PALLADIUM GOLD	QUAD	24 Mbps	S-PQFP-G100			1.6 mm		14 mm	Not Qualified				e4			14 mm
STLC3065QTR	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.14 mA	6 V	2-4 CONVERSION	5.5/14.5		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel					-40 Cel	TIN LEAD	QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT	e0			10 mm
E-STLC3075	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.09 mA	6 V	2-4 CONVERSION	4.5/12		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel	-74				-40 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQFP-G44		3	1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT	e3	30	260	10 mm
STLC3055Q	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.14 mA	6 V	2-4 CONVERSION	5.5/14.5		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel					-40 Cel	NICKEL PALLADIUM GOLD	QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT	e4			10 mm
STU2071FN	STMicroelectronics	DIGITAL SLIC		J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		5	BASIC	CHIP CARRIER	LDCC28,.5SQ	Digital Transmission Interfaces	1.27 mm			4 V	.4 V	CCITT V.29		TIN LEAD	QUAD	.144 Mbps	S-PQCC-J28	U		4.57 mm		11.5062 mm	Not Qualified	.7 Amp			e0			11.5062 mm
STLC5411FN	STMicroelectronics	DIGITAL SLIC	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		5	BASIC	CHIP CARRIER	LDCC44,.7SQ	Digital Transmission Interfaces	1.27 mm	70 Cel		2.4 V	.4 V	ANSI T1.601	0 Cel	TIN LEAD	QUAD	.16 Mbps	S-PQCC-J44	U		4.57 mm		16.5862 mm	Not Qualified	7 Amp			e0			16.5862 mm
ST5421CFN	STMicroelectronics	ISDN LOOP EXTENDER CIRCUIT	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		5	BASIC	CHIP CARRIER	LDCC28,.5SQ	Digital Transmission Interfaces	1.27 mm	70 Cel		2.4 V	.4 V	CCITT I.430	0 Cel	TIN LEAD	QUAD	.192 Mbps	S-PQCC-J28	S/T		4.57 mm		11.5062 mm	Not Qualified	3.2 Amp			e0			11.5062 mm
E-STLC3055N	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.09 mA	6 V	2-4 CONVERSION	5.5/12		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel	-74				-40 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQFP-G44		3	1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT	e3	30	260	10 mm
STLC3055N	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.09 mA	6 V	2-4 CONVERSION	5.5/12		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel					-40 Cel	NICKEL PALLADIUM GOLD	QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT	e4			10 mm
STLC5412FNTR	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V				CHIP CARRIER			1.27 mm	85 Cel					-40 Cel		QUAD		S-PQCC-J44			4.57 mm		16.5862 mm	Not Qualified							16.5862 mm
E-STLC3085	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.09 mA	6 V	2-4 CONVERSION	4.5/12		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel	-64				-40 Cel		QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT				10 mm
STLC3065Q	STMicroelectronics	DIGITAL SLIC	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BCDMOS	.14 mA	6 V	2-4 CONVERSION	5.5/14.5		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Analog Transmission Interfaces	.8 mm	85 Cel					-40 Cel	TIN LEAD	QUAD		S-PQFP-G44			1.6 mm		10 mm	Not Qualified		26 dB	CONSTANT CURRENT	e0			10 mm
MC145572PB	NXP Semiconductors	ISDN ECHO CANCELLER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V			PRIMARY	FLATPACK, LOW PROFILE	QFP44,.47SQ,32		.8 mm	85 Cel		2.4 V	.5 V	ANSI T1.601	-40 Cel		QUAD	4 Mbps	S-PQFP-G44	U		1.6 mm	T-1(DS1)	10 mm		2.5 Amp						10 mm
MC145572FN	NXP Semiconductors	ISDN ECHO CANCELLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V			PRIMARY	CHIP CARRIER	LDCC44,.7SQ		1.27 mm	85 Cel		2.4 V	.5 V	ANSI T1.601	-40 Cel		QUAD	4 Mbps	S-PQCC-J44	U		4.57 mm	T-1(DS1)	16.585 mm		2.5 Amp						16.585 mm
PEB2085N	Infineon Technologies	ISDN CONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		5	BASIC	CHIP CARRIER	LDCC44,.7SQ	Digital Transmission Interfaces	1.27 mm	70 Cel		2.4 V	.45 V	CCITT I.430	0 Cel	TIN LEAD	QUAD	.144 Mbps	S-PQCC-J44	S/T		4.57 mm		16.6 mm	Not Qualified	7 Amp			e0			16.6 mm
PSB2110A1N	Infineon Technologies		COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES		CMOS		5 V		5		CHIP CARRIER	LDCC44,.7SQ	Digital Transmission Interfaces	1.27 mm	70 Cel		4.5 V	.45 V	CCITT I.411	0 Cel	Tin/Lead (Sn/Pb)	QUAD	.064 Mbps	S-PQCC-J44	R					Not Qualified	7 Amp			e0
PSB2186HV1.1	Infineon Technologies	ISDN CONTROLLER		GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES	1							FLATPACK											QUAD		S-PQFP-G64						Not Qualified
PSF3086F	Infineon Technologies	PCM TRANSCEIVER		GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				FLATPACK, LOW PROFILE, FINE PITCH			.5 mm								QUAD		S-PQFP-G64			1.6 mm		10 mm	Not Qualified							10 mm
PEF3086H	Infineon Technologies	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				FLATPACK			.8 mm	85 Cel					-45 Cel		QUAD		S-PQFP-G64			2.45 mm		14 mm	Not Qualified							14 mm
PEF81902FV1.1	Infineon Technologies	ISDN CONTROLLER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel					-40 Cel		QUAD		S-PQFP-G64		3	1.6 mm		10 mm	Not Qualified						220	10 mm
PSB2170	Infineon Technologies	ISDN ECHO CANCELLER	COMMERCIAL	GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V		3.3,5		FLATPACK	QFP80,.7SQ	Other Telecom ICs	.65 mm	70 Cel					0 Cel		QUAD		S-PQFP-G80			2.45 mm		14 mm	Not Qualified							14 mm
PEF3452	Infineon Technologies	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V				FLATPACK			.8 mm	85 Cel					-40 Cel		QUAD		S-PQFP-G44			2.45 mm		10 mm	Not Qualified							10 mm

Digital Transmission Interfaces

Digital Transmission Interfaces are electronic components that enable the efficient transfer of digital signals between devices in communication systems. These interfaces are used in a wide range of applications, including computer networking, telecommunications, and consumer electronics. They provide a means of transmitting digital data over various communication channels, such as Ethernet networks, USB cables, and wireless communication protocols.

Digital Transmission Interfaces use a variety of protocols and standards to ensure the reliable and efficient transmission of data. These protocols include packet framing, which involves adding header and footer information to each data packet to enable proper routing and error detection. Error correction techniques are also used to ensure that the transmitted data is accurately received, even in the presence of noise or other transmission errors. Flow control is another important aspect of digital transmission, which helps to prevent data loss or congestion by regulating the flow of data between the transmitting and receiving devices.

There are several different types of Digital Transmission Interfaces, each designed for a specific communication channel or protocol. Ethernet is a popular interface used for wired networking, while USB is commonly used for connecting peripherals to computers and mobile devices. Bluetooth and Wi-Fi are wireless communication protocols used for short-range and long-range data transmission, respectively. Serial Interfaces, such as RS-232 and RS-485, are used for point-to-point data communication over long distances.

Digital Transmission Interfaces offer several advantages over analog communication systems. They provide higher data rates, increased noise immunity, and more efficient use of transmission bandwidth. They also offer greater flexibility and ease of use, enabling seamless integration with other digital systems. However, Digital Transmission Interfaces also require specialized hardware and software, and may be susceptible to data loss or corruption due to transmission errors.