ISDN CONTROLLER Digital Transmission Interfaces 71

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Supply Voltage	Power Supplies (V)	ISDN Access Rate	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Output High Voltage	Maximum Output Low Voltage	Standard	Minimum Operating Temperature	Terminal Finish	Terminal Position	Data Rate	JESD-30 Code	Reference Point	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	JESD-609 Code	Peak Reflow Temperature (C)	Length
MC145425P	NXP Semiconductors	ISDN CONTROLLER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	15 mA	5 V	5	BASIC	IN-LINE	DIP24,.6	Digital Transmission Interfaces	2.54 mm	85 Cel	2.5 V	.8 V		-40 Cel	Tin/Lead (Sn/Pb)	DUAL	.16 Mbps	R-PDIP-T24	S/T		5.08 mm	15.24 mm	Not Qualified	3.5 Amp	e0		31.75 mm
MTC-20276PC-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			CHIP CARRIER			1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J44			4.57 mm	16.5862 mm	Not Qualified				16.5862 mm
MTC-20277PQ-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK			.8 mm	85 Cel				-40 Cel		QUAD		S-PQFP-G44			2.45 mm	10 mm	Not Qualified				10 mm
MTC-20285	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	144	QFP	SQUARE	PLASTIC/EPOXY	YES	1						FLATPACK			.65 mm	70 Cel				0 Cel		QUAD		S-PQFP-G144			3.91 mm	28 mm	Not Qualified				28 mm
MTC-20280PQ-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	100	QFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK			.65 mm	70 Cel				0 Cel		QUAD		R-PQFP-G100			3.4 mm	14 mm	Not Qualified				20 mm
MTC-20285-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	144	QFP	SQUARE	PLASTIC/EPOXY	YES	1						FLATPACK			.65 mm	85 Cel				-40 Cel		QUAD		S-PQFP-G144			3.91 mm	28 mm	Not Qualified				28 mm
MTC-20277-PCINTT	Onsemi	ISDN CONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V			CHIP CARRIER			1.27 mm	85 Cel				-40 Cel		QUAD		S-PQCC-J44			4.57 mm	16.5862 mm	Not Qualified				16.5862 mm
MTC-20279PQ-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	80	QFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK			.8 mm	85 Cel				-40 Cel		QUAD		R-PQFP-G80			3.4 mm	14 mm	Not Qualified				20 mm
MTC-20279PQ-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	80	QFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK			.8 mm	70 Cel				0 Cel		QUAD		R-PQFP-G80			3.4 mm	14 mm	Not Qualified				20 mm
MTC-20172-PD	Onsemi	ISDN CONTROLLER	COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1			5 V			IN-LINE			2.54 mm	70 Cel				0 Cel		DUAL		R-PDIP-T22			5.59 mm	10.16 mm	Not Qualified				27.685 mm
MTC-20278PQ-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	80	QFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK			.8 mm	70 Cel				0 Cel		QUAD		R-PQFP-G80			3.4 mm	14 mm	Not Qualified				20 mm
MTC-20280PQT-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	100	QFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK			.65 mm	85 Cel				-40 Cel		QUAD		R-PQFP-G100			3.4 mm	14 mm	Not Qualified				20 mm
MTC-20276PC-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			CHIP CARRIER			1.27 mm	85 Cel				-40 Cel		QUAD		S-PQCC-J44			4.57 mm	16.5862 mm	Not Qualified				16.5862 mm
MTC-20276PQ-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK			.8 mm	70 Cel				0 Cel		QUAD		S-PQFP-G44			2.45 mm	10 mm	Not Qualified				10 mm
MTC-20278ILTQ	Onsemi	ISDN CONTROLLER		GULL WING	64	QFP	UNSPECIFIED	PLASTIC/EPOXY	YES	4			3.3 V			FLATPACK										QUAD		X-PQFP-G64					Not Qualified
MTC-20277PC-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			CHIP CARRIER			1.27 mm	70 Cel				0 Cel		QUAD		S-PQCC-J44			4.57 mm	16.585 mm	Not Qualified				16.585 mm
MTC-20276-PCINTQ	Onsemi	ISDN CONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V			CHIP CARRIER			1.27 mm	85 Cel				-40 Cel		QUAD		S-PQCC-J44			4.57 mm	16.5862 mm	Not Qualified				16.5862 mm
MTC-20280PQT-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	100	QFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK			.65 mm	70 Cel				0 Cel		QUAD		R-PQFP-G100			3.4 mm	14 mm	Not Qualified				20 mm
MTC-20280PQ-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	100	QFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK			.65 mm	85 Cel				-40 Cel		QUAD		R-PQFP-G100			3.4 mm	14 mm	Not Qualified				20 mm
MTC-20172-PC	Onsemi	ISDN CONTROLLER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			5 V			CHIP CARRIER				70 Cel				0 Cel		QUAD		S-PQCC-J28					Not Qualified
MTC-20277PQ-C	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK			.8 mm	70 Cel				0 Cel		QUAD		S-PQFP-G44			2.45 mm	10 mm	Not Qualified				10 mm
MTC-20278PQ-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	80	QFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK			.8 mm	85 Cel				-40 Cel		QUAD		R-PQFP-G80			3.4 mm	14 mm	Not Qualified				20 mm
MTC-20276PQ-I	Onsemi	ISDN CONTROLLER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK			.8 mm	70 Cel				0 Cel		QUAD		S-PQFP-G44			2.45 mm	10 mm	Not Qualified				10 mm
MTC-20276-PQINTQ	Onsemi	ISDN CONTROLLER	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK			.8 mm	85 Cel				-40 Cel		QUAD		S-PQFP-G44			2.35 mm	10 mm	Not Qualified				10 mm
MTC-20277PC-I	Onsemi	ISDN CONTROLLER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			CHIP CARRIER			1.27 mm	85 Cel				-40 Cel		QUAD		S-PQCC-J44			4.57 mm	16.585 mm	Not Qualified				16.585 mm
MC145425DW	NXP Semiconductors	ISDN CONTROLLER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	15 mA	5 V	5	BASIC	SMALL OUTLINE	SOP24,.4	Digital Transmission Interfaces	1.27 mm	85 Cel	2.5 V	.8 V		-40 Cel	Tin/Lead (Sn/Pb)	DUAL	.16 Mbps	R-PDSO-G24	S/T		2.65 mm	7.5 mm	Not Qualified	3.5 Amp	e0		15.395 mm
MC145421P	NXP Semiconductors	ISDN CONTROLLER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS	15 mA	5 V	5	BASIC	IN-LINE	DIP24,.6	Digital Transmission Interfaces	2.54 mm	85 Cel	2.5 V	.8 V		-40 Cel	Tin/Lead (Sn/Pb)	DUAL	.16 Mbps	R-PDIP-T24	S/T		5.08 mm	15.24 mm	Not Qualified	3.5 Amp	e0		31.75 mm
MC145421DW	NXP Semiconductors	ISDN CONTROLLER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS	15 mA	5 V	5	BASIC	SMALL OUTLINE	SOP24,.4	Digital Transmission Interfaces	1.27 mm	85 Cel	2.5 V	.8 V		-40 Cel	Tin/Lead (Sn/Pb)	DUAL	.16 Mbps	R-PDSO-G24	S/T		2.65 mm	7.5 mm	Not Qualified	3.5 Amp	e0		15.395 mm
PEB2085N	Infineon Technologies	ISDN CONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V	5	BASIC	CHIP CARRIER	LDCC44,.7SQ	Digital Transmission Interfaces	1.27 mm	70 Cel	2.4 V	.45 V	CCITT I.430	0 Cel	TIN LEAD	QUAD	.144 Mbps	S-PQCC-J44	S/T		4.57 mm	16.6 mm	Not Qualified	7 Amp	e0		16.6 mm
PSB2186HV1.1	Infineon Technologies	ISDN CONTROLLER		GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES	1						FLATPACK										QUAD		S-PQFP-G64					Not Qualified
PEF81902FV1.1	Infineon Technologies	ISDN CONTROLLER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel				-40 Cel		QUAD		S-PQFP-G64		3	1.6 mm	10 mm	Not Qualified			220	10 mm
PSB2186P	Infineon Technologies	ISDN CONTROLLER	COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		5 V	5	BASIC	IN-LINE	DIP40,.6	Digital Transmission Interfaces	2.54 mm	70 Cel	2.4 V	.45 V	CCITT I.430	0 Cel	TIN LEAD	DUAL	.144 Mbps	R-PDIP-T40	S/T		5.1 mm	15.24 mm	Not Qualified	7 Amp	e0		50.9 mm
PEF81912FV1.3	Infineon Technologies	ISDN CONTROLLER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel				-40 Cel		QUAD		S-PQFP-G64			1.6 mm	10 mm	Not Qualified				10 mm
PEF82912FV1.3	Infineon Technologies	ISDN CONTROLLER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel				-40 Cel		QUAD		S-PQFP-G64			1.6 mm	10 mm	Not Qualified				10 mm
PEF82912HV1.3	Infineon Technologies	ISDN CONTROLLER	INDUSTRIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK			.8 mm	85 Cel				-40 Cel		QUAD		S-PQFP-G64			2.45 mm	14 mm	Not Qualified				14 mm
PSB3186F	Infineon Technologies	ISDN CONTROLLER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V	3.3	BASIC	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	Digital Transmission Interfaces	.5 mm	70 Cel	2.4 V	.45 V	CCITT I.430	0 Cel		QUAD	.144 Mbps	S-PQFP-G64	S/T		1.6 mm	10 mm	Not Qualified	4.5 Amp			10 mm
PEB2085P	Infineon Technologies	ISDN CONTROLLER	COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		5 V	5	BASIC	IN-LINE	DIP40,.6	Digital Transmission Interfaces	2.54 mm	70 Cel	2.4 V	.45 V	CCITT I.430	0 Cel	TIN LEAD	DUAL	.144 Mbps	R-PDIP-T40	S/T		5.1 mm	15.24 mm	Not Qualified	7 Amp	e0		50.9 mm
PEF81913FV1.3	Infineon Technologies	ISDN CONTROLLER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel				-40 Cel		QUAD		S-PQFP-G64			1.6 mm	10 mm	Not Qualified				10 mm
PEF80913	Infineon Technologies	ISDN CONTROLLER	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V	3.3	BASIC	FLATPACK	QFP44,.5SQ,32	Digital Transmission Interfaces	.8 mm	85 Cel	2.4 V	.45 V	ANSI T1.601	-40 Cel		QUAD	.144 Mbps	S-PQFP-G44	S/T TO U (NT-1)		2.45 mm	10 mm	Not Qualified	4 Amp			10 mm
PSB3186FV1.4	Infineon Technologies	ISDN CONTROLLER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V	3.3	BASIC	FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	Digital Transmission Interfaces	.5 mm	70 Cel	2.4 V	.45 V	CCITT I.430	0 Cel		QUAD	.144 Mbps	S-PQFP-G64	S/T	3	1.6 mm	10 mm	Not Qualified	4.5 Amp		260	10 mm
PSB2196HV1.4	Infineon Technologies	ISDN CONTROLLER		GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	1						FLATPACK			.8 mm							QUAD		S-PQFP-G44			2.45 mm	10 mm	Not Qualified				10 mm
PEF82902FV1.1	Infineon Technologies	ISDN CONTROLLER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V			FLATPACK, LOW PROFILE, FINE PITCH			.5 mm	85 Cel				-40 Cel	MATTE TIN	QUAD		S-PQFP-G64		3	1.6 mm	10 mm	Not Qualified		e3	260	10 mm
PSB2196N	Infineon Technologies	ISDN CONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V			CHIP CARRIER			1.27 mm	70 Cel				0 Cel	TIN LEAD	QUAD		S-PQCC-J44			4.57 mm	16.6 mm	Not Qualified		e0		16.6 mm
PSB2186PV1.1	Infineon Technologies	ISDN CONTROLLER		THROUGH-HOLE	40		RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE										DUAL		R-PDIP-T40					Not Qualified
PSB2186N	Infineon Technologies	ISDN CONTROLLER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V	5	BASIC	CHIP CARRIER	LDCC44,.7SQ	Digital Transmission Interfaces	1.27 mm	70 Cel	2.4 V	.45 V	CCITT I.430	0 Cel	TIN LEAD	QUAD	.144 Mbps	S-PQCC-J44	S/T		4.57 mm	16.6 mm	Not Qualified	7 Amp	e0		16.6 mm
PSB2186NV1.1	Infineon Technologies	ISDN CONTROLLER		J BEND	44		SQUARE	PLASTIC/EPOXY	YES	1						CHIP CARRIER										QUAD		S-PQCC-J44					Not Qualified
PSB2155	Infineon Technologies	ISDN CONTROLLER	COMMERCIAL	GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V	3.3	BASIC	FLATPACK	QFP80,.7SQ	Digital Transmission Interfaces	.65 mm	70 Cel	2.4 V	.45 V	ANSI T1.605	0 Cel		QUAD	.192 Mbps	S-PQFP-G80	S/T		2.45 mm	14 mm	Not Qualified	6 Amp			14 mm
PEF2070-N	Infineon Technologies	ISDN CONTROLLER	INDUSTRIAL	J BEND	28	QCCJ	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		5 V			CHIP CARRIER	LDCC28,.4X.6	Other Telecom ICs	1.27 mm	85 Cel				-40 Cel	Tin/Lead (Sn/Pb)	QUAD		R-PQCC-J28			3.8 mm	8.95 mm	Not Qualified		e0		14.05 mm

Digital Transmission Interfaces

Digital Transmission Interfaces are electronic components that enable the efficient transfer of digital signals between devices in communication systems. These interfaces are used in a wide range of applications, including computer networking, telecommunications, and consumer electronics. They provide a means of transmitting digital data over various communication channels, such as Ethernet networks, USB cables, and wireless communication protocols.

Digital Transmission Interfaces use a variety of protocols and standards to ensure the reliable and efficient transmission of data. These protocols include packet framing, which involves adding header and footer information to each data packet to enable proper routing and error detection. Error correction techniques are also used to ensure that the transmitted data is accurately received, even in the presence of noise or other transmission errors. Flow control is another important aspect of digital transmission, which helps to prevent data loss or congestion by regulating the flow of data between the transmitting and receiving devices.

There are several different types of Digital Transmission Interfaces, each designed for a specific communication channel or protocol. Ethernet is a popular interface used for wired networking, while USB is commonly used for connecting peripherals to computers and mobile devices. Bluetooth and Wi-Fi are wireless communication protocols used for short-range and long-range data transmission, respectively. Serial Interfaces, such as RS-232 and RS-485, are used for point-to-point data communication over long distances.

Digital Transmission Interfaces offer several advantages over analog communication systems. They provide higher data rates, increased noise immunity, and more efficient use of transmission bandwidth. They also offer greater flexibility and ease of use, enabling seamless integration with other digital systems. However, Digital Transmission Interfaces also require specialized hardware and software, and may be susceptible to data loss or corruption due to transmission errors.