INDUSTRIAL Digital Transmission Interfaces 488

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Supply Voltage	Power Supplies (V)	ISDN Access Rate	Package Style (Meter)	Package Equivalence Code	Sub-Category	Carrier Type-3	Terminal Pitch	Maximum Operating Temperature	Minimum Output High Voltage	Maximum Output Low Voltage	Minimum Operating Temperature	Terminal Finish	Terminal Position	Data Rate	JESD-30 Code	Reference Point	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Carrier Type-2	Carrier Type-1	Width	Qualification	Maximum Output Low Current	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
DS21348TN	Maxim Integrated	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	TQFP	SQUARE	PLASTIC/EPOXY	YES	1		.1 mA	3.3 V	3.3		FLATPACK, THIN PROFILE	TQFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	Tin/Lead (Sn/Pb)	QUAD		S-PQFP-G44		1	1.2 mm			10 mm	Not Qualified		e0	20	240	10 mm
DS21348TN+	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	TQFP	SQUARE	PLASTIC/EPOXY	YES	1		.1 mA	3.3 V	3.3		FLATPACK, THIN PROFILE	TQFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G44		3	1.2 mm			10 mm	Not Qualified		e3	30	260	10 mm
DS21Q50LN+	Maxim Integrated	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs		.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G100		3	1.6 mm		CEPT PCM-30/E-1	14 mm	Not Qualified		e3	30	260	14 mm
DS21Q50LN	Maxim Integrated	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs		.5 mm	85 Cel			-40 Cel	TIN LEAD	QUAD		S-PQFP-G100		3	1.6 mm		CEPT PCM-30/E-1	14 mm	Not Qualified		e0			14 mm
HMC7044LP10BE	Analog Devices	PCM JITTER ATTENUATOR	INDUSTRIAL	NO LEAD	68	HVQCCN	SQUARE	UNSPECIFIED	YES	1			3.3 V			CHIP CARRIER				.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-XQCC-N68		3	.9 mm			10 mm			e3			10 mm
HMC7044LP10BETR	Analog Devices	PCM JITTER ATTENUATOR	INDUSTRIAL	NO LEAD	68	HVQCCN	SQUARE	UNSPECIFIED	YES	1			3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-XQCC-N68		3	.9 mm			10 mm			e3		260	10 mm
XRT83SL30IV-F	Exar	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	Other Telecom ICs		.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G64		1	1.6 mm	T-1(DS1)	CEPT PCM-30/E-1	10 mm	Not Qualified		e3			10 mm
IDT82V2081PPG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK, LOW PROFILE				.8 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G44			1.6 mm			10 mm	Not Qualified		e3			10 mm
DS21348GN	Maxim Integrated	PCM TRANSCEIVER	INDUSTRIAL	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	1		.1 mA	3.3 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	TIN LEAD	BOTTOM		S-PBGA-B49		3	1.5 mm			7 mm	Not Qualified		e0			7 mm
DS21348GN+	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	1		.1 mA	3.3 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM		S-PBGA-B49		3	1.5 mm			7 mm	Not Qualified		e1	30	260	7 mm
82V2084PFG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1		.38 mA	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP128,.63X.87,20	Digital Transmission Interfaces		.5 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-PQFP-G128		3	1.6 mm			14 mm	Not Qualified		e3	30	260	20 mm
IDT82V2084PFG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK, LOW PROFILE, FINE PITCH				.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		R-PQFP-G128		3	1.6 mm			14 mm	Not Qualified		e3			20 mm
IDT82V2081PPG	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK, LOW PROFILE				.8 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G44		3	1.6 mm			10 mm	Not Qualified		e3	40	260	10 mm
82V2051EPPG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V	3.3		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G44		3	1.6 mm			10 mm	Not Qualified		e3	40	260	10 mm
IDT82P2282PFG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	100	LQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR		3.3 V	3.3		FLATPACK, LOW PROFILE	QFP100,.63X.87	Other Telecom ICs	T-1C(DS1C)	.65 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-PQFP-G100		3	1.6 mm	T-1(DS1)	T-1(DS1)	14 mm	Not Qualified		e3	30	260	20 mm
IDT82V2051EPPG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V	3.3		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G44		3	1.6 mm			10 mm	Not Qualified		e3	40	260	10 mm
82V2081PPG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		.095 mA	3.3 V	3.3		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G44			1.6 mm			10 mm	Not Qualified		e3			10 mm
MT9172AN1	Microchip Technology	DIGITAL SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		5 V			SMALL OUTLINE, SHRINK PITCH				.65 mm	85 Cel			-40 Cel	MATTE TIN	DUAL		R-PDSO-G24			2 mm			5.3 mm	Not Qualified		e3			8.2 mm
82V2084PFG	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1		.38 mA	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP128,.63X.87,20	Digital Transmission Interfaces		.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		R-PQFP-G128		3	1.6 mm			14 mm	Not Qualified		e3	30	260	20 mm
IDT82V2084PFG	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	128	LFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK, LOW PROFILE, FINE PITCH				.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		R-PQFP-G128		3	1.6 mm			14 mm	Not Qualified		e3			20 mm
82P2288BBG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	BALL	256	BGA	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR		1.8 V	1.8,3.3		GRID ARRAY	BGA256,16X16,40	Other Telecom ICs		1 mm	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM		S-PBGA-B256		3	3.5 mm	T-1(DS1)	T-1(DS1)	17 mm	Not Qualified		e1			17 mm
CS61584A-IQ3	Cirrus Logic	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2	CMOS		3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	Digital Transmission Interfaces		.5 mm	85 Cel			-40 Cel	TIN LEAD	QUAD		S-PQFP-G64		3	1.6 mm			10 mm	Not Qualified		e0			10 mm
CS61584A-IQ3Z	Cirrus Logic	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	2			3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	Digital Transmission Interfaces		.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G64		3	1.6 mm			10 mm	Not Qualified		e3		250	10 mm
IDT82P2288BBG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	BALL	256	BGA	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR		1.8 V	1.8,3.3		GRID ARRAY	BGA256,16X16,40	Other Telecom ICs		1 mm	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM		S-PBGA-B256		3	3.5 mm	T-1(DS1)	T-1(DS1)	17 mm	Not Qualified		e1			17 mm
IDT82V2082PFG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	80	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK, LOW PROFILE				.65 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G80		3	1.6 mm			14 mm	Not Qualified		e3			14 mm
MT9173AN1	Microchip Technology	DIGITAL SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		5 V	5	BASIC	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	Digital Transmission Interfaces		.65 mm	85 Cel	2.4 V	.4 V	-40 Cel	MATTE TIN	DUAL	.144 Mbps	R-PDSO-G24	S		2 mm			5.3 mm	Not Qualified	5 Amp	e3			8.2 mm
MT9173ANR1	Microchip Technology	DIGITAL SLIC	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		5 V	5	BASIC	SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	Digital Transmission Interfaces		.65 mm	85 Cel	2.4 V	.4 V	-40 Cel	MATTE TIN	DUAL	.144 Mbps	R-PDSO-G24	S		2 mm			5.3 mm	Not Qualified	5 Amp	e3			8.2 mm
82P2282PFG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	100	LQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR		3.3 V	3.3		FLATPACK, LOW PROFILE	QFP100,.63X.87	Other Telecom ICs	T-1C(DS1C)	.65 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-PQFP-G100		3	1.6 mm	T-1(DS1)	T-1(DS1)	14 mm	Not Qualified		e3	30	260	20 mm
82P2284BBG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	BALL	208	BGA	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR		1.8 V	1.8,3.3		GRID ARRAY	BGA208,16X16,40	Other Telecom ICs	T-1C(DS1C)	1 mm	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM		S-PBGA-B208		3	1.97 mm	T-1(DS1)	T-1(DS1)	17 mm	Not Qualified		e1			17 mm
82V2041EPPG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		.095 mA	3.3 V	3.3		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G44		3	1.6 mm			10 mm	Not Qualified		e3	40	260	10 mm
82V2052EPFG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	80	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V	3.3		FLATPACK, LOW PROFILE	QFP80,.64SQ	Digital Transmission Interfaces		.65 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQFP-G80		3	1.6 mm			14 mm	Not Qualified		e3	30	260	14 mm
82V2082PFG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	80	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		.18 mA	3.3 V	3.3		FLATPACK, LOW PROFILE	QFP80,.64SQ	Digital Transmission Interfaces		.65 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQFP-G80		3	1.6 mm			14 mm	Not Qualified		e3	30	260	14 mm
AFE1230E/1K	Texas Instruments	DIGITAL SLIC	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V	3.3,5		SMALL OUTLINE	SSOP28,.3	Other Telecom ICs		.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2.5 Mbps	R-PDSO-G28		2	2 mm			5.3 mm	Not Qualified		e4	30	260	10.2 mm
AFE1230E/1KG4	Texas Instruments	DIGITAL SLIC	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1			3.3 V	3.3,5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Other Telecom ICs		.65 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	DUAL	2.5 Mbps	R-PDSO-G28		2	2 mm			5.3 mm	Not Qualified		e4	30	260	10.2 mm
IDT82P2281PFG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	80	LQFP	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR		3.3 V	3.3		FLATPACK, LOW PROFILE	QFP80,.64SQ	Other Telecom ICs	T-1C(DS1C)	.65 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQFP-G80		3	1.6 mm	T-1(DS1)	T-1(DS1)	14 mm	Not Qualified		e3	30	260	14 mm
IDT82P2282PFG	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	100	LQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR		1.8 V	3.3		FLATPACK, LOW PROFILE	QFP100,.63X.87	Other Telecom ICs	T-1C(DS1C)	.65 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	QUAD		R-PQFP-G100		3	1.6 mm	T-1(DS1)	T-1(DS1)	14 mm	Not Qualified		e3	30	260	20 mm
IDT82P2284BBG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	BALL	208	BGA	SQUARE	PLASTIC/EPOXY	YES	1	BIPOLAR		1.8 V	1.8,3.3		GRID ARRAY	BGA208,16X16,40	Other Telecom ICs	T-1C(DS1C)	1 mm	85 Cel			-40 Cel	TIN SILVER COPPER	BOTTOM		S-PBGA-B208		3	1.97 mm	T-1(DS1)	T-1(DS1)	17 mm	Not Qualified		e1			17 mm
IDT82V2041EPPG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		.095 mA	3.3 V	3.3		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G44		3	1.6 mm			10 mm	Not Qualified		e3	40	260	10 mm
IDT82V2042EPFG8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK					85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G80		3					Not Qualified		e3
IDT82V2051EPPG	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V	3.3		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G44		3	1.6 mm			10 mm	Not Qualified		e3	40	260	10 mm
XRT5683AIP-F	Exar	PCM TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	BIPOLAR	.055 mA	5 V	5		IN-LINE	DIP18,.3	Digital Transmission Interfaces		2.54 mm	85 Cel			-40 Cel	MATTE TIN	DUAL		R-PDIP-T18			5.33 mm			7.62 mm	Not Qualified		e3			22.48 mm
82V2041EPP8	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		.095 mA	3.3 V	3.3		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	TIN LEAD	QUAD		S-PQFP-G44		3	1.6 mm			10 mm	Not Qualified		e0	30	240	10 mm
82V2081PPG	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	44	LQFP	SQUARE	PLASTIC/EPOXY	YES	1		.095 mA	3.3 V	3.3		FLATPACK, LOW PROFILE	QFP44,.47SQ,32	Digital Transmission Interfaces		.8 mm	85 Cel			-40 Cel	Matte Tin (Sn)	QUAD		S-PQFP-G44		3	1.6 mm			10 mm	Not Qualified		e3	NOT SPECIFIED	260	10 mm
IDT82V2082PFG	Renesas Electronics	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	80	LQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V			FLATPACK, LOW PROFILE				.65 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G80		3	1.6 mm			14 mm	Not Qualified		e3			14 mm
XRT83SL30IV	Exar	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	Other Telecom ICs		.5 mm	85 Cel			-40 Cel	TIN LEAD	QUAD		S-PQFP-G64			1.6 mm	T-1(DS1)	CEPT PCM-30/E-1	10 mm	Not Qualified		e0			10 mm
ZL50232QCG1	Microchip Technology	ISDN ECHO CANCELLER	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1		.25 mA	1.8 V	1.8,3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs		.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G100			1.6 mm			14 mm	Not Qualified		e3			14 mm
DS3150TN	Maxim Integrated	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1		.11 mA	3.3 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Digital Transmission Interfaces		.5 mm	85 Cel			-40 Cel	TIN LEAD	QUAD		S-PQFP-G48		1	1.2 mm			7 mm	Not Qualified		e0			7 mm
DS3150TN+	Maxim Integrated	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1		.11 mA	3.3 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Digital Transmission Interfaces		.5 mm	85 Cel			-40 Cel	MATTE TIN	QUAD		S-PQFP-G48		1	1.2 mm			7 mm	Not Qualified		e3	30	260	7 mm

Digital Transmission Interfaces

Digital Transmission Interfaces are electronic components that enable the efficient transfer of digital signals between devices in communication systems. These interfaces are used in a wide range of applications, including computer networking, telecommunications, and consumer electronics. They provide a means of transmitting digital data over various communication channels, such as Ethernet networks, USB cables, and wireless communication protocols.

Digital Transmission Interfaces use a variety of protocols and standards to ensure the reliable and efficient transmission of data. These protocols include packet framing, which involves adding header and footer information to each data packet to enable proper routing and error detection. Error correction techniques are also used to ensure that the transmitted data is accurately received, even in the presence of noise or other transmission errors. Flow control is another important aspect of digital transmission, which helps to prevent data loss or congestion by regulating the flow of data between the transmitting and receiving devices.

There are several different types of Digital Transmission Interfaces, each designed for a specific communication channel or protocol. Ethernet is a popular interface used for wired networking, while USB is commonly used for connecting peripherals to computers and mobile devices. Bluetooth and Wi-Fi are wireless communication protocols used for short-range and long-range data transmission, respectively. Serial Interfaces, such as RS-232 and RS-485, are used for point-to-point data communication over long distances.

Digital Transmission Interfaces offer several advantages over analog communication systems. They provide higher data rates, increased noise immunity, and more efficient use of transmission bandwidth. They also offer greater flexibility and ease of use, enabling seamless integration with other digital systems. However, Digital Transmission Interfaces also require specialized hardware and software, and may be susceptible to data loss or corruption due to transmission errors.