Analog Devices Digital Transmission Interfaces 111

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Maximum Supply Current	Nominal Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Minimum Operating Temperature	Terminal Finish	Terminal Position	Data Rate	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Carrier Type-2	Carrier Type-1	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
ADRF5474BCZ	Analog Devices	PCM JITTER ATTENUATOR																														NOT SPECIFIED	NOT SPECIFIED
ADRF5474BCZ-GP	Analog Devices	PCM JITTER ATTENUATOR
DS26303G-075	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	BALL	160	BGA	SQUARE	PLASTIC/EPOXY	YES	1		.478 mA	3.3 V	3.3	GRID ARRAY	BGA160(UNSPEC)	Digital Transmission Interfaces		70 Cel	0 Cel	TIN LEAD	BOTTOM		S-PBGA-B160						Not Qualified	e0
DS26303L-XXX+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	144	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH			.5 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQFP-G144		1.6 mm			20 mm	Not Qualified	e3			20 mm
DS26303L-075	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	144	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1		.478 mA	3.3 V	3.3	FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	Digital Transmission Interfaces	.5 mm	70 Cel	0 Cel	TIN LEAD	QUAD		S-PQFP-G144		1.6 mm			20 mm	Not Qualified	e0			20 mm
DS26303LN-XXX+	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	144	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQFP-G144		1.6 mm			20 mm	Not Qualified	e3			20 mm
DS26303LN-XXX	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	144	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel	TIN LEAD	QUAD		S-PQFP-G144		1.6 mm			20 mm	Not Qualified	e0			20 mm
DS26303L-XXX	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	144	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH			.5 mm	70 Cel	0 Cel	TIN LEAD	QUAD		S-PQFP-G144		1.6 mm			20 mm	Not Qualified	e0			20 mm
DS26303G-120	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	BALL	160	BGA	SQUARE	PLASTIC/EPOXY	YES	1		.478 mA	3.3 V	3.3	GRID ARRAY	BGA160(UNSPEC)	Digital Transmission Interfaces		70 Cel	0 Cel	TIN LEAD	BOTTOM		S-PBGA-B160						Not Qualified	e0
DS26303GN-120	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	BALL	160	BGA	SQUARE	PLASTIC/EPOXY	YES	1		.478 mA	3.3 V	3.3	GRID ARRAY	BGA160(UNSPEC)	Digital Transmission Interfaces		85 Cel	-40 Cel	TIN LEAD	BOTTOM		S-PBGA-B160						Not Qualified	e0
DS32508+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	BALL	484	BGA	SQUARE	PLASTIC/EPOXY	YES	1			1.8 V	1.8,3.3	GRID ARRAY	BGA484,22X22,40	Digital Transmission Interfaces	1 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	BOTTOM		S-PBGA-B484		2.41 mm			23 mm	Not Qualified	e3			23 mm
DS26303GN-075	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	BALL	160	BGA	SQUARE	PLASTIC/EPOXY	YES	1		.478 mA	3.3 V	3.3	GRID ARRAY	BGA160(UNSPEC)	Digital Transmission Interfaces		85 Cel	-40 Cel	TIN LEAD	BOTTOM		S-PBGA-B160						Not Qualified	e0
DS32508N-W	Analog Devices	PCM TRANSCEIVER
DS32508-W	Analog Devices	PCM TRANSCEIVER
DS3150Q+T&R	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		CHIP CARRIER			1.27 mm	70 Cel	0 Cel		QUAD		S-PQCC-J28		4.57 mm			11.5062 mm	Not Qualified		NOT SPECIFIED	NOT SPECIFIED	11.5062 mm
DS3254DK	Analog Devices	PCM TRANSCEIVER
DS26303L-75+A3	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	144	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH			.5 mm	70 Cel	0 Cel		QUAD		S-PQFP-G144		1.6 mm			20 mm			NOT SPECIFIED	NOT SPECIFIED	20 mm
DS32512DK	Analog Devices	PCM TRANSCEIVER
DS26303LN-120+A3	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	144	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel		QUAD		S-PQFP-G144		1.6 mm			20 mm			NOT SPECIFIED	NOT SPECIFIED	20 mm
DS26303L-120+A3	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	144	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH			.5 mm	70 Cel	0 Cel		QUAD		S-PQFP-G144		1.6 mm			20 mm			NOT SPECIFIED	NOT SPECIFIED	20 mm
DS26303LN-75+A3	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	144	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH			.5 mm	85 Cel	-40 Cel		QUAD		S-PQFP-G144		1.6 mm			20 mm			NOT SPECIFIED	NOT SPECIFIED	20 mm
DS3150TN+GSW	Analog Devices	PCM TRANSCEIVER
DS3150TC1	Analog Devices	PCM TRANSCEIVER
DS2145QN	Analog Devices	PCM TRANSCEIVER		J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		CHIP CARRIER			1.27 mm			TIN LEAD	QUAD		S-PQCC-J28		4.57 mm			11.505 mm	Not Qualified	e0			11.505 mm
DS2145N	Analog Devices	PCM TRANSCEIVER		THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		5 V		IN-LINE			2.54 mm			TIN LEAD	DUAL		R-PDIP-T28		5.08 mm			15.24 mm	Not Qualified	e0			36.83 mm
DS2149QN/T&R+	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			5 V	5	CHIP CARRIER	LDCC28,.5SQ	Digital Transmission Interfaces	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQCC-J28	1	4.57 mm			11.5062 mm	Not Qualified	e3			11.5062 mm
DS2189S	Analog Devices	PCM RECEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		BIPOLAR		5 V	5	SMALL OUTLINE	SO24(UNSPEC)	Digital Transmission Interfaces		70 Cel	0 Cel	TIN LEAD	DUAL	2.048 Mbps	R-PDSO-G24			T-1(DS1)	CEPT PCM-30/E-1		Not Qualified	e0
DS21349Q/T&R+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			3.3 V		CHIP CARRIER			1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQCC-J28	1	4.572 mm			11.5062 mm	Not Qualified	e3			11.5062 mm
DS2146N	Analog Devices	PCM TRANSCEIVER		THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		5 V		IN-LINE			2.54 mm			TIN LEAD	DUAL		R-PDIP-T28		5.08 mm			15.24 mm	Not Qualified	e0			36.83 mm
DS21448+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	BALL	144	BGA	SQUARE	PLASTIC/EPOXY	YES	1		.4 mA	3.3 V	3.3	GRID ARRAY	BGA144,12X12,50	Digital Transmission Interfaces	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	BOTTOM		S-PBGA-B144		2.22 mm			17 mm	Not Qualified	e3			17 mm
DS2146QN	Analog Devices	PCM TRANSCEIVER		J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		CHIP CARRIER			1.27 mm			TIN LEAD	QUAD		S-PQCC-J28		4.57 mm			11.505 mm	Not Qualified	e0			11.505 mm
DS2146Q	Analog Devices	PCM TRANSCEIVER		J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V		CHIP CARRIER			1.27 mm			TIN LEAD	QUAD		S-PQCC-J28		4.57 mm			11.505 mm	Not Qualified	e0			11.505 mm
DS2149Q/T&R+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			5 V	5	CHIP CARRIER	LDCC28,.5SQ	Digital Transmission Interfaces	1.27 mm	70 Cel	0 Cel	Matte Tin (Sn) - annealed	QUAD		S-PQCC-J28	1	4.57 mm			11.5062 mm	Not Qualified	e3			11.5062 mm
DS2189	Analog Devices	PCM RECEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		BIPOLAR		5 V	5	IN-LINE	DIP24,.3	Digital Transmission Interfaces	2.54 mm	70 Cel	0 Cel	TIN LEAD	DUAL	2.048 Mbps	R-PDIP-T24			T-1(DS1)	CEPT PCM-30/E-1		Not Qualified	e0
DS21448N+	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	BALL	144	BGA	SQUARE	PLASTIC/EPOXY	YES	1		.4 mA	3.3 V	3.3	GRID ARRAY	BGA144,12X12,50	Digital Transmission Interfaces	1.27 mm	85 Cel	-40 Cel	Matte Tin (Sn) - annealed	BOTTOM		S-PBGA-B144		2.22 mm			17 mm	Not Qualified	e3			17 mm
DS2146	Analog Devices	PCM TRANSCEIVER		THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS		5 V		IN-LINE			2.54 mm			TIN LEAD	DUAL		R-PDIP-T28		5.08 mm			15.24 mm	Not Qualified	e0			36.83 mm
DS21354LN+	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD		S-PQFP-G100	3	1.6 mm		CEPT PCM-30/E-1	14 mm	Not Qualified	e3	30	260	14 mm
DS21448G+	Analog Devices	PCM TRANSCEIVER																														NOT SPECIFIED	NOT SPECIFIED
DS21552LB	Analog Devices	PCM TRANSCEIVER
DS21448-W	Analog Devices	PCM TRANSCEIVER
DS2148T+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	44	TQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS	.125 mA	5 V	5	FLATPACK, THIN PROFILE	TQFP44,.47SQ,32	Digital Transmission Interfaces	.8 mm	70 Cel	0 Cel	MATTE TIN	QUAD		S-PQFP-G44	3	1.2 mm			10 mm	Not Qualified	e3	30	260	10 mm
DS2149QN+	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			5 V	5	CHIP CARRIER	LDCC28,.5SQ	Digital Transmission Interfaces	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD		S-PQCC-J28	1	4.57 mm			11.5062 mm	Not Qualified	e3		245	11.5062 mm
DS21Q552B	Analog Devices	PCM TRANSCEIVER
DS21348GN-C01	Analog Devices	PCM TRANSCEIVER
DS21Q50L-W+	Analog Devices	PCM TRANSCEIVER
DS2149QN+T&R	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	1			5 V	5	CHIP CARRIER	LDCC28,.5SQ	Digital Transmission Interfaces	1.27 mm	85 Cel	-40 Cel	MATTE TIN	QUAD		S-PQCC-J28	1	4.57 mm			11.5062 mm	Not Qualified	e3		245	11.5062 mm
DS21552LN+	Analog Devices	PCM TRANSCEIVER	INDUSTRIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		5 V	5	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs	.5 mm	85 Cel	-40 Cel	MATTE TIN	QUAD		S-PQFP-G100	3	1.6 mm		T-1(DS1)	14 mm	Not Qualified	e3	30	260	14 mm
DS21354L+	Analog Devices	PCM TRANSCEIVER	COMMERCIAL	GULL WING	100	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1	CMOS		3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP100,.63SQ,20	Other Telecom ICs	.5 mm	70 Cel	0 Cel	MATTE TIN	QUAD		S-PQFP-G100	3	1.6 mm		CEPT PCM-30/E-1	14 mm	Not Qualified	e3	30	260	14 mm

Digital Transmission Interfaces

Digital Transmission Interfaces are electronic components that enable the efficient transfer of digital signals between devices in communication systems. These interfaces are used in a wide range of applications, including computer networking, telecommunications, and consumer electronics. They provide a means of transmitting digital data over various communication channels, such as Ethernet networks, USB cables, and wireless communication protocols.

Digital Transmission Interfaces use a variety of protocols and standards to ensure the reliable and efficient transmission of data. These protocols include packet framing, which involves adding header and footer information to each data packet to enable proper routing and error detection. Error correction techniques are also used to ensure that the transmitted data is accurately received, even in the presence of noise or other transmission errors. Flow control is another important aspect of digital transmission, which helps to prevent data loss or congestion by regulating the flow of data between the transmitting and receiving devices.

There are several different types of Digital Transmission Interfaces, each designed for a specific communication channel or protocol. Ethernet is a popular interface used for wired networking, while USB is commonly used for connecting peripherals to computers and mobile devices. Bluetooth and Wi-Fi are wireless communication protocols used for short-range and long-range data transmission, respectively. Serial Interfaces, such as RS-232 and RS-485, are used for point-to-point data communication over long distances.

Digital Transmission Interfaces offer several advantages over analog communication systems. They provide higher data rates, increased noise immunity, and more efficient use of transmission bandwidth. They also offer greater flexibility and ease of use, enabling seamless integration with other digital systems. However, Digital Transmission Interfaces also require specialized hardware and software, and may be susceptible to data loss or corruption due to transmission errors.