Telephone Line ICs

Reset All

Part	Manufacturer	Telecom IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	No. of Functions	Technology	Nominal Negative Supply Voltage	Maximum Supply Current	Nominal Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Terminal Pitch	Maximum Operating Temperature	Repertory	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Additional Features	Crystal Frequency (MHz)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Make-break Ratio	Length
TA31033AP	Toshiba	TELEPHONE SPEECH CIRCUIT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE			2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16		4.45 mm	7.62 mm	Not Qualified							19.25 mm
TA31025F-TP1	Toshiba	TELEPHONE SPEECH CIRCUIT	OTHER	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE, SHRINK PITCH			1 mm	85 Cel		-30 Cel	TIN LEAD	DUAL	R-PDSO-G24		2.2 mm	6 mm	Not Qualified			e0				13 mm
TA31050N	Toshiba	SPEAKER PHONE CIRCUIT	COMMERCIAL EXTENDED	THROUGH-HOLE	42	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO	1			25 mA	5 V		IN-LINE, SHRINK PITCH			1.778 mm	75 Cel		-30 Cel	TIN LEAD	DUAL	R-PDIP-T42		4.5 mm	15.24 mm	Not Qualified			e0				38 mm
TA31068F-TP1	Toshiba	TELEPHONE SPEECH CIRCUIT	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE, SHRINK PITCH			1 mm	60 Cel		-20 Cel		DUAL	R-PDSO-G24		1.9 mm	6 mm	Not Qualified							13 mm
TA31001F(EL)	Toshiba	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G8		1.9 mm	4.4 mm	Not Qualified				NOT SPECIFIED	240		5 mm
TA31002F(EL)	Toshiba	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G8		1.9 mm	4.4 mm	Not Qualified				NOT SPECIFIED	240		5 mm
TA31002AF-TP1	Toshiba	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G8		1.9 mm	4.4 mm	Not Qualified				NOT SPECIFIED	240		5 mm
TC31040P	Toshiba	TELEPHONE DIALER CIRCUIT		THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE			2.54 mm				TIN LEAD	DUAL	R-PDIP-T24		4.45 mm	7.62 mm	Not Qualified			e0				29.8 mm
TA31075AF-TP1	Toshiba	TELEPHONE RINGER CIRCUIT	OTHER	GULL WING	10	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE, SHRINK PITCH			1 mm	70 Cel		-30 Cel		DUAL	R-PDSO-G10		1.9 mm	4.4 mm	Not Qualified							5.2 mm
TA31002F	Toshiba	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G8		1.9 mm	4.4 mm	Not Qualified			e0				5 mm
TA31065F-TP2	Toshiba	TELEPHONE SPEECH CIRCUIT	OTHER	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE, SHRINK PITCH			1 mm	60 Cel		-30 Cel		DUAL	R-PDSO-G24		2.2 mm	6 mm	Not Qualified							13 mm
TA31070F	Toshiba	TELEPHONE RINGER CIRCUIT	COMMERCIAL EXTENDED	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE			1.27 mm	75 Cel		-30 Cel		DUAL	R-PDSO-G8		1.9 mm	4.4 mm	Not Qualified				NOT SPECIFIED	240		5 mm
TA31002AF(EL)	Toshiba	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel		DUAL	R-PDSO-G8		1.9 mm	4.4 mm	Not Qualified				NOT SPECIFIED	240		5 mm
TA31033F(ER)	Toshiba	TELEPHONE SPEECH CIRCUIT	OTHER	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE			1.27 mm	60 Cel		-30 Cel	TIN LEAD	DUAL	R-PDSO-G16		1.9 mm	4.4 mm	Not Qualified			e0				10 mm
TA31025N	Toshiba	TELEPHONE SPEECH CIRCUIT	OTHER	THROUGH-HOLE	24	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE, SHRINK PITCH			1.778 mm	85 Cel		-30 Cel	TIN LEAD	DUAL	R-PDIP-T24		4.5 mm	7.62 mm	Not Qualified			e0				22 mm
TA31024N	Toshiba	TELEPHONE SPEECH CIRCUIT	OTHER	THROUGH-HOLE	24	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE, SHRINK PITCH			1.778 mm	85 Cel		-30 Cel	TIN LEAD	DUAL	R-PDIP-T24		4.5 mm	7.62 mm	Not Qualified			e0				22 mm
ICS1660NLF	Renesas Electronics	TELEPHONE CALLING NO IDENTIFICATION CIRCUIT	COMMERCIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS			5 V		IN-LINE			2.54 mm	70 Cel		0 Cel	MATTE TIN	DUAL	R-PDIP-T18		5.33 mm	7.62 mm	Not Qualified			e3				22.86 mm
CD22859E98	Renesas Electronics		OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS					IN-LINE	DIP16,.3	Telephone Circuits	2.54 mm	60 Cel		-25 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				Not Qualified		3.58	e0
HA16804PS	Renesas Electronics	TELEPHONE RINGER CIRCUIT	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE			2.54 mm	70 Cel		-20 Cel		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified							9.6 mm
UPD9706CT	Renesas Electronics			THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS				1.5/6	IN-LINE	DIP28,.4	Telephone Circuits	2.54 mm		REPERTORY		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28				Not Qualified			e0
HA16802PS	Renesas Electronics	TELEPHONE RINGER CIRCUIT	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE			2.54 mm	70 Cel		-20 Cel		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified							9.6 mm
HD61825A	Renesas Electronics	TELEPHONE DIALER CIRCUIT	COMMERCIAL EXTENDED	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1				5 V		IN-LINE			2.54 mm	75 Cel		-20 Cel		DUAL	R-PDIP-T18		5.08 mm	7.62 mm	Not Qualified	SELECTABLE MAKE/BREAK RATIO 1:2					1:1.5	22 mm
CD22859D	Renesas Electronics		OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO		CMOS					IN-LINE	DIP16,.3	Telephone Circuits	2.54 mm	60 Cel		-25 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16				Not Qualified		3.58	e0
HD61825B	Renesas Electronics	TELEPHONE DIALER CIRCUIT	COMMERCIAL EXTENDED	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1				5 V		IN-LINE			2.54 mm	75 Cel		-20 Cel		DUAL	R-PDIP-T18		5.08 mm	7.62 mm	Not Qualified	SELECTABLE MAKE/BREAK RATIO 1:2					1:1.5	22 mm
ICS1660N	Renesas Electronics	TELEPHONE CALLING NO IDENTIFICATION CIRCUIT	COMMERCIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1	CMOS			5 V		IN-LINE			2.54 mm	70 Cel		0 Cel	TIN LEAD	DUAL	R-PDIP-T18		5.33 mm	7.62 mm	Not Qualified			e0				22.86 mm
NW6006-XS	Renesas Electronics	TELEPHONE CALLING NO IDENTIFICATION CIRCUIT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		.0038 mA	3 V	3/5	SMALL OUTLINE	SOP20,.4	Telephone Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	IT CAN ALSO OPERATE AT 5V SUPPLY		e0	20	225		12.8 mm
ICS1660M	Renesas Electronics	TELEPHONE CALLING NO IDENTIFICATION CIRCUIT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS			5 V		SMALL OUTLINE				70 Cel		0 Cel	TIN LEAD	DUAL	R-PDSO-G20				Not Qualified			e0
HA16805F	Renesas Electronics	TELEPHONE RINGER CIRCUIT	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1						SMALL OUTLINE			1.27 mm	70 Cel		-20 Cel		DUAL	R-PDSO-G8		2.03 mm	4.4 mm	Not Qualified							4.85 mm
UPD9706GU	Renesas Electronics			GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		CMOS				1.5/6	SMALL OUTLINE	SOP28,.45	Telephone Circuits	1.27 mm		REPERTORY		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G28				Not Qualified			e0
HA16805PS	Renesas Electronics	TELEPHONE RINGER CIRCUIT	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE			2.54 mm	70 Cel		-20 Cel		DUAL	R-PDIP-T8		5.06 mm	7.62 mm	Not Qualified							9.6 mm
NW6005-XS	Renesas Electronics	TELEPHONE CALLING NO IDENTIFICATION CIRCUIT	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS		.0038 mA	3 V	3/5	SMALL OUTLINE	SOP20,.4	Telephone Circuits	1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	IT CAN ALSO OPERATE AT 5V SUPPLY		e0	20	225		12.8 mm
ICS1660MLF	Renesas Electronics	TELEPHONE CALLING NO IDENTIFICATION CIRCUIT	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	CMOS			5 V		SMALL OUTLINE				70 Cel		0 Cel	MATTE TIN	DUAL	R-PDSO-G20				Not Qualified			e3
F1180NBGI8	Renesas Electronics	TELECOM CIRCUIT																					TIN			1						e3		260
ATTL7590AAE-TR	Broadcom	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		-170 V		5 V		SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		2.67 mm		Not Qualified			e0	30	240
L7590C	Broadcom	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		-170 V		5 V		SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		2.67 mm		Not Qualified			e0	NOT SPECIFIED	NOT SPECIFIED
ATTL7590AAE	Broadcom	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		-170 V		5 V		SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		2.67 mm		Not Qualified			e0	30	240
LUCL7590BAE-TR	Broadcom	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		-170 V		5 V		SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		2.67 mm		Not Qualified			e0	30	240
LUCL7590BAE	Broadcom	TELEPHONE RINGER CIRCUIT	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1		-170 V		5 V		SMALL OUTLINE			1.27 mm	85 Cel		-40 Cel	TIN LEAD	DUAL	R-PDSO-G16		2.67 mm		Not Qualified			e0	30	240
KA8603D	Samsung	TELEPHONE SPEECH CIRCUIT	COMMERCIAL EXTENDED	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	1	BIPOLAR					SMALL OUTLINE	SOP16,.25	Other Telecom ICs	1.27 mm	75 Cel		-25 Cel		DUAL	R-PDSO-G16		1.95 mm	3.95 mm	Not Qualified							9.9 mm
KA2414NA+	Samsung		COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		BIPOLAR			5 V	5	IN-LINE	DIP40,.6	Telephone Circuits	2.54 mm	60 Cel		-20 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T40							e0
KA8504	Samsung	TELEPHONE SPEECH CIRCUIT	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1					2/7.6	IN-LINE	DIP16,.3	Other Telecom ICs	2.54 mm	85 Cel		-40 Cel		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified							19.4 mm
KS58500E	Samsung		COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS		.7 mA		2/5.5	IN-LINE	DIP22,.4	Telephone Circuits	2.54 mm	70 Cel	REPERTORY	-20 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T22				Not Qualified		3.58	e0
KA8601	Samsung	TELEPHONE SPEECH CIRCUIT		THROUGH-HOLE	48	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE, SHRINK PITCH			1.778 mm					DUAL	R-PDIP-T48		5.08 mm	15.24 mm	Not Qualified							42.47 mm
KS58C05N	Samsung		COMMERCIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS		.15 mA	3.5 V	3.5	IN-LINE	DIP18,.3	Telephone Circuits	2.54 mm	70 Cel		-20 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T18				Not Qualified			e0
KS58B21N	Samsung		COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS		.001 mA	3.5 V	3.5	IN-LINE	DIP22,.3	Telephone Circuits	2.54 mm	70 Cel		-20 Cel		DUAL	R-PDIP-T22				Not Qualified		3.58
S1T2418G01-D0B0	Samsung	TELEPHONE RINGER CIRCUIT	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	1						IN-LINE			2.54 mm	70 Cel		-20 Cel		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified							9.2 mm
KS58C21P	Samsung		COMMERCIAL	THROUGH-HOLE	22	SDIP	RECTANGULAR	PLASTIC/EPOXY	NO		CMOS		.001 mA	3.5 V	3.5	IN-LINE, SHRINK PITCH	SDIP22,.3	Telephone Circuits	1.78 mm	70 Cel		-20 Cel		DUAL	R-PDIP-T22				Not Qualified		3.58
KA2414J	Samsung		COMMERCIAL	THROUGH-HOLE	40	DIP	RECTANGULAR	CERAMIC	NO		BIPOLAR			5 V	5	IN-LINE	DIP40,.6	Telephone Circuits	2.54 mm	60 Cel		-20 Cel	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T40				Not Qualified			e0

Telephone Line ICs

Telephone Line ICs are electronic components used in telephone systems to interface with the telephone line and provide necessary functionality for telephone communication. These ICs are designed to provide reliable and efficient operation of the telephone line, allowing for clear and uninterrupted communication between two devices.

Telephone Line ICs use various techniques to interface with the telephone line, including pulse dialing, dual-tone multi-frequency (DTMF) signaling, and loop current sensing. Pulse dialing is used to send a series of electrical pulses over the telephone line to dial a phone number. DTMF signaling is used to send a sequence of tones to control various telephone functions, such as call forwarding and call waiting. Loop current sensing is used to detect the presence of a telephone off-hook condition, allowing the telephone system to provide appropriate signaling and call management.

Some common features of Telephone Line ICs include:

1. Telephone line interface: Telephone Line ICs provide the necessary interface with the telephone line to enable telephone communication.

2. Signal processing: Telephone Line ICs are designed to process signals quickly and efficiently, ensuring clear and uninterrupted communication.

3. Tone generation and detection: Telephone Line ICs can generate and detect various tones used for telephone communication, such as dial tones and busy signals.

4. Call management: Telephone Line ICs can provide call management functions, such as call waiting and call forwarding.

Telephone Line ICs are used in a variety of telephone systems, including traditional landline phones, cordless phones, and PBX (Private Branch Exchange) systems. They are also used in other communication systems that require telephone line interface, such as alarm systems and security systems.