SERIES CONNECTED, 2 ELEMENTS Silicon Surge Protectors 368

  1. Home
  2. Silicon Surge Protectors
Manufacturers
    • Bourns
    • Cooper Industries
    • Diodes Incorporated
    • Eaton Corporation
    • Littelfuse
    • NXP Semiconductors
    • Nexperia
    • Onsemi
    • ROHM
    • Renesas Electronics
    • STMicroelectronics
    • Texas Instruments
    • Vishay Intertechnology
    • Yageo
Trigger Device Type
    • SILICON SURGE PROTECTOR
    • THYRISTOR SURGE PROTECTOR
Package Style (Meter)
    • CHIP CARRIER
    • CYLINDRICAL
    • DISK BUTTON
    • FLANGE MOUNT
    • IN LINE
    • IN-LINE
    • LONG FORM
    • SMALL OUTLINE
    • SPECIAL SHAPE
Surface Mount
    • NO
    • YES
Terminal Position
    • AXIAL
    • BOTTOM
    • DUAL
    • END
    • QUAD
    • SINGLE
    • UNSPECIFIED
Configuration (1)
    • SERIES CONNECTED, 2 ELEMENTS
    • 2 BANKS, SERIES CONNECTED, CENTER TAP, 2 ELEMENTS
    • 2 BANKS, STAR CONNECTED, 3 ELEMENTS
    • 4 BANKS, SERIES CONNECTED, CENTER TAP, 2 ELEMENTS
    • 4 BANKS, STAR CONNECTED, 3 ELEMENTS
    • COMPLEX
    • DELTA CONNECTED, 3 ELEMENTS
    • SEPARATE, 2 ELEMENTS
    • SEPARATE, 4 ELEMENTS
    • SERIES CONNECTED, CENTER TAP, 2 ELEMENTS
    • SINGLE
    • SINGLE WITH BUILT-IN DIODE
    • SINGLE WITH BUILT-IN DIODE AND RESISTOR
    • SINGLE WITH BUILT-IN RESISTOR
    • SINGLE WITH DIODE BRIDGE RECTIFIER CIRCUIT
    • STAR CONNECTED, 3 ELEMENTS
Case Connection
    • ANODE
    • ISOLATED
    • MAIN TERMINAL 2
Maximum On-state Voltage
    • 1.2 V
    • 1.3 V
    • 1.5 V
    • 10 V
    • 2 V
    • 3 V
    • 4 V
    • 5 V
    • 8 V
Package Body Material
    • CERAMIC, METAL-SEALED COFIRED
    • PLASTIC/EPOXY
    • UNSPECIFIED
Maximum DC Gate Trigger Current
    • 15 mA
    • 200 mA
Non Repetitive Peak On-state Current
    • 1.6 A
    • 10 A
    • 100 A
    • 120 A
    • 13 A
    • 14 A
    • 15 A
    • 15.5 A
    • 150 A
    • 16 A
    • 2.5 A
    • 20 A
    • 200 A
    • 22 A
    • 24 A
    • 25 A
    • 3 A
    • 30 A
    • 300 A
    • 31 A
    • 32 A
    • 35 A
    • 4 A
    • 4.3 A
    • 40 A
    • 400 A
    • 5 A
    • 5.6 A
    • 5.7 A
    • 50 A
    • 55 A
    • 6 A
    • 60 A
    • 65 A
    • 7.1 A
    • 70 A
    • 8 A
    • 8.5 A
    • 9 A
Minimum Breakdown Voltage
    • 110 V
    • 120 V
    • 13 V
    • 130 V
    • 135 V
    • 140 V
    • 160 V
    • 18 V
    • 180 V
    • 190 V
    • 195 V
    • 200 V
    • 205 V
    • 206 V
    • 210 V
    • 215 V
    • 220 V
    • 240 V
    • 250 V
    • 265 V
    • 27 V
    • 270 V
    • 275 V
    • 280 V
    • 300 V
    • 350 V
    • 40 V
    • 400 V
    • 5.5 V
    • 58 V
    • 6 V
    • 6.5 V
    • 60 V
    • 65 V
    • 73.2 V
    • 77 V
    • 8 V
    • 80 V
    • 9 V
    • 90 V
    • 95 V
    • 98 V
Terminal Form
    • C BEND
    • FLAT
    • GULL WING
    • J BEND
    • NO LEAD
    • THROUGH-HOLE
    • UNSPECIFIED
    • WIRE
    • WRAP AROUND
Package Shape
    • RECTANGULAR
    • ROUND
    • SQUARE
    • UNSPECIFIED
Maximum On-state Current
    • 1 A
    • 1.3 A
No. of Elements
    • 1
    • 12
    • 14
    • 2
    • 28
    • 3
    • 4
    • 6
    • 8
Maximum Leakage Current
    • .00001 mA
    • .00002 mA
    • .001 mA
    • .005 mA
    • .01 mA
    • .25 mA
Repetitive Peak Reverse Voltage
    • 100 V
    • 108 V
    • 110 V
    • 116 V
    • 117 V
    • 120 V
    • 123 V
    • 130 V
    • 140 V
    • 15 V
    • 150 V
    • 160 V
    • 170 V
    • 180 V
    • 190 V
    • 193 V
    • 200 V
    • 211 V
    • 216 V
    • 220 V
    • 228 V
    • 230 V
    • 235 V
    • 240 V
    • 245 V
    • 25 V
    • 262 V
    • 265 V
    • 270 V
    • 275 V
    • 28 V
    • 280 V
    • 300 V
    • 32 V
    • 320 V
    • 35 V
    • 360 V
    • 380 V
    • 400 V
    • 420 V
    • 440 V
    • 50 V
    • 51 V
    • 55 V
    • 550 V
    • 56 V
    • 58 V
    • 6 V
    • 61 V
    • 62 V
    • 65 V
    • 68 V
    • 7 V
    • 70 V
    • 75 V
    • 8 V
    • 80 V
    • 90 V
No. of Terminals
    • 1
    • 10
    • 12
    • 16
    • 2
    • 20
    • 3
    • 5
    • 6
    • 8
Sub-Category
    • Breakover Diodes
    • DIACs
    • Gated Switches
    • Non Gated Switches
    • Other Trigger Devices
    • Silicon Controlled Rectifiers
    • Silicon Surge Protectors
Maximum DC Off-state Voltage
    • 10 V
    • 100 V
    • 105 V
    • 108 V
    • 110 V
    • 116 V
    • 117 V
    • 12 V
    • 120 V
    • 130 V
    • 135 V
    • 140 V
    • 144 V
    • 145 V
    • 15 V
    • 150 V
    • 155 V
    • 160 V
    • 162 V
    • 170 V
    • 175 V
    • 18 V
    • 180 V
    • 190 V
    • 198 V
    • 200 V
    • 214 V
    • 216 V
    • 220 V
    • 225 V
    • 230 V
    • 235 V
    • 24 V
    • 240 V
    • 243 V
    • 245 V
    • 25 V
    • 250 V
    • 255 V
    • 265 V
    • 270 V
    • 275 V
    • 28 V
    • 280 V
    • 290 V
    • 30 V
    • 300 V
    • 32 V
    • 320 V
    • 335 V
    • 350 V
    • 360 V
    • 380 V
    • 400 V
    • 420 V
    • 440 V
    • 5 V
    • 50 V
    • 55 V
    • 550 V
    • 56 V
    • 58 V
    • 6 V
    • 61 V
    • 63 V
    • 65 V
    • 66 V
    • 70 V
    • 75 V
    • 8 V
    • 80 V
    • 9 V
    • 90 V
Maximum Operating Temperature
    • 105 Cel
    • 110 Cel
    • 120 Cel
    • 125 Cel
    • 150 Cel
    • 175 Cel
    • 65 Cel
    • 70 Cel
    • 80 Cel
    • 85 Cel
Minimum Operating Temperature
    • -20 Cel
    • -30 Cel
    • -40 Cel
    • -55 Cel
    • -56 Cel
    • -65 Cel
    • 0 Cel
Terminal Finish
    • MATTE TIN
    • MATTE TIN/SILVER
    • Matte Tin (Sn)
    • Matte Tin (Sn) - annealed
    • NICKEL PALLADIUM GOLD
    • NICKEL PALLADIUM GOLD SILVER
    • Nickel/Palladium/Gold (Ni/Pd/Au)
    • TIN
    • TIN LEAD
    • TIN OVER NICKEL
    • TIN/TIN COPPER
    • Tin (Sn)
    • Tin/Lead (Sn/Pb)
JESD-30 Code
    • O-CEDB-N2
    • O-PALF-W2
    • O-PBCY-T2
    • O-PBCY-T3
    • O-PBCY-W3
    • O-XALF-W2
    • O-XXLF-W3
    • O-XXSS-N2
    • R-CDIP-T16
    • R-PBCC-N6
    • R-PBCC-N8
    • R-PBCY-T2
    • R-PDIP-T16
    • R-PDIP-T8
    • R-PDSO-C2
    • R-PDSO-C3
    • R-PDSO-F2
    • R-PDSO-G10
    • R-PDSO-G16
    • R-PDSO-G2
    • R-PDSO-G5
    • R-PDSO-G6
    • R-PDSO-G8
    • R-PDSO-J2
    • R-PDSO-N6
    • R-PDSO-R2
    • R-PSFM-T2
    • R-PSFM-T3
    • R-PSIP-T12
    • R-PSIP-T2
    • R-PSIP-T20
    • R-PSIP-T3
    • R-PSSO-G1
    • R-PSSO-G2
    • R-XDSO-R2
    • R-XSIP-T12
    • S-CQCC-N20
    • S-PBCC-N2
    • X-PXSS-X2
Moisture Sensitivity Level (MSL)
    • 1
    • 2
Maximum DC Gate Trigger Voltage
    • 1.8 V
    • 2.5 V
Qualification
    • Not Qualified
Repetitive Peak Off-state Voltage
    • 100 V
    • 200 V
    • 5 V
    • 85 V
Minimum Critical Rate of Rise of Off-state Voltage
    • 250 V/us
Maximum Holding Current
    • 100 mA
    • 12 mA
    • 120 mA
    • 125 mA
    • 130 mA
    • 150 mA
    • 150000 mA
    • 160 mA
    • 170 mA
    • 180 mA
    • 200 mA
    • 225 mA
    • 260 mA
    • 30 mA
    • 320 mA
    • 350 mA
    • 40 mA
    • 50 mA
    • 600 mA
    • 750 mA
    • 800 mA
Additional Features
    • HIGH RELIABILITY
    • LOW CAPACITANCE
    • SINGLE OR DUAL CHIP
    • UL RECOGNIZED
JEDEC-95 Code
    • DO-15
    • DO-201AD
    • DO-214
    • DO-214AA
    • DO-214AC
    • DO-41
    • MS-001BA
    • MS-001BB
    • MS-012AA
    • MS-012AC
    • MS-013
    • TO-218
    • TO-220
    • TO-220AB
    • TO-220AC
    • TO-262M
    • TO-263AB
    • TO-92
Maximum Clamping Voltage
    • 12 V
    • 15 V
    • 150 V
    • 270 V
    • 325 V
    • 40 V
    • 60 V
    • 7 V
JESD-609 Code
    • e0
    • e3
    • e3/e2
    • e3/e4
    • e4
Maximum Time At Peak Reflow Temperature (s)
    • 10
    • 30
    • 40
    • 60
    • NOT SPECIFIED
Maximum Breakdown Voltage
    • 100 V
    • 109 V
    • 110 V
    • 115 V
    • 120 V
    • 121 V
    • 125 V
    • 130 V
    • 133 V
    • 135 V
    • 14 V
    • 140 V
    • 142 V
    • 145 V
    • 147 V
    • 15 V
    • 150 V
    • 154 V
    • 157 V
    • 16 V
    • 160 V
    • 165 V
    • 168 V
    • 170 V
    • 173 V
    • 178 V
    • 18 V
    • 180 V
    • 181 V
    • 190 V
    • 193 V
    • 20 V
    • 200 V
    • 210 V
    • 213 V
    • 215 V
    • 217 V
    • 219 V
    • 22 V
    • 220 V
    • 230 V
    • 233 V
    • 240 V
    • 241 V
    • 247 V
    • 25 V
    • 250 V
    • 255 V
    • 26 V
    • 260 V
    • 265 V
    • 267 V
    • 269 V
    • 270 V
    • 275 V
    • 280 V
    • 285 V
    • 289 V
    • 290 V
    • 292 V
    • 293 V
    • 30 V
    • 300 V
    • 310 V
    • 32 V
    • 320 V
    • 325 V
    • 33 V
    • 330 V
    • 340 V
    • 345 V
    • 35 V
    • 350 V
    • 36 V
    • 360 V
    • 365 V
    • 370 V
    • 375 V
    • 38 V
    • 380 V
    • 390 V
    • 395 V
    • 40 V
    • 400 V
    • 430 V
    • 440 V
    • 450 V
    • 470 V
    • 5 V
    • 500 V
    • 530 V
    • 55 V
    • 570 V
    • 58 V
    • 600 V
    • 68 V
    • 7.5 V
    • 70 V
    • 700 V
    • 72 V
    • 75 V
    • 77 V
    • 78 V
    • 8 V
    • 80 V
    • 82 V
    • 84 V
    • 85 V
    • 850 V
    • 86 V
    • 88 V
    • 89 V
    • 90 V
    • 91 V
    • 94 V
    • 95 V
    • 960 V
    • 98 V
    • 99 V
Peak Reflow Temperature (C)
    • 235
    • 245
    • 250
    • 255
    • 260
    • NOT SPECIFIED
Reference Standard
    • AEC-Q101
    • AEC-Q101; IEC-61000-4-2; ISO 10605
    • AEC-Q101; UL RECOGNIZED
    • AEC-Q200; IEC-61000-4-2
    • IEC-1000-4-5
    • IEC-61000-4-2
    • IEC-61000-4-2; ISO 10605
    • IEC-61000-4-5; MIL-STD-750
    • IEC-61000-4-5; MIL-STD-750; UL RECOGNIZED
    • IEC-61000-4-5; UL RECOGNIZED
    • MIL-STD-750; UL RECOGNIZED
    • UL APPROVED
    • UL RECOGNIZED
Reset All
Part RoHS Manufacturer Trigger Device Type Package Style (Meter) Surface Mount Terminal Position Configuration Case Connection Maximum On-state Voltage Package Body Material Maximum DC Gate Trigger Current Non Repetitive Peak On-state Current Minimum Breakdown Voltage Terminal Form Package Shape Maximum On-state Current No. of Elements Maximum Leakage Current Repetitive Peak Reverse Voltage No. of Terminals Sub-Category Maximum DC Off-state Voltage Maximum Operating Temperature Minimum Operating Temperature Terminal Finish JESD-30 Code Moisture Sensitivity Level (MSL) Maximum DC Gate Trigger Voltage Qualification Repetitive Peak Off-state Voltage Minimum Critical Rate of Rise of Off-state Voltage Maximum Holding Current Additional Features JEDEC-95 Code Maximum Clamping Voltage JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Maximum Breakdown Voltage Peak Reflow Temperature (C) Reference Standard

P4802ABL64RB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

150 Cel

-40 Cel

TIN

R-PSIP-T2

1

Not Qualified

e3

290 V

P4802ABLRB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

150 Cel

-40 Cel

TIN

R-PSIP-T3

1

Not Qualified

e3

290 V

P4802AB64

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

TIN LEAD

R-PSIP-T2

Not Qualified

e0

290 V

P4802AB60

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

TIN

R-PSIP-T3

1

Not Qualified

e3

290 V

P4802ABL61

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

150 Cel

-40 Cel

TIN

R-PSIP-T2

1

Not Qualified

e3

290 V

P4802AB69RB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

TIN LEAD

R-PSIP-T3

Not Qualified

e0

290 V

P4802ABLTA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

150 Cel

-40 Cel

TIN

R-PSIP-T3

1

Not Qualified

e3

290 V

P4802ABRB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

TIN LEAD

R-PSIP-T3

Not Qualified

e0

290 V

P4802AB69

Littelfuse

THYRISTOR SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

MATTE TIN

R-PSIP-T3

2

Not Qualified

e3

290 V

P4802AB60TA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

TIN LEAD

R-PSIP-T3

Not Qualified

e0

290 V

P4802ABL61RB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

150 Cel

-40 Cel

TIN

R-PSIP-T2

1

Not Qualified

e3

290 V

P4802ABL69RB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

150 Cel

-40 Cel

TIN

R-PSIP-T3

1

Not Qualified

e3

290 V

P4802ABRP

Littelfuse

THYRISTOR SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

30 A

THROUGH-HOLE

RECTANGULAR

2

220 V

2

Silicon Surge Protectors

440 V

150 Cel

-40 Cel

MATTE TIN

R-PSIP-T2

Not Qualified

150 mA

e3

300 V

P4802ACRP

Littelfuse

THYRISTOR SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

THROUGH-HOLE

RECTANGULAR

2

220 V

2

Silicon Surge Protectors

440 V

150 Cel

-40 Cel

MATTE TIN

R-PSIP-T2

Not Qualified

150 mA

e3

300 V

P4802ABTA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

TIN LEAD

R-PSIP-T3

Not Qualified

e0

290 V

P4802AB61RB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

TIN LEAD

R-PSIP-T2

Not Qualified

e0

290 V

P4802ABL64

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

150 Cel

-40 Cel

TIN

R-PSIP-T2

1

Not Qualified

e3

290 V

P4802SBLRP

Littelfuse

THYRISTOR SURGE PROTECTOR

SMALL OUTLINE

YES

DUAL

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

25 A

C BEND

RECTANGULAR

2

2

Silicon Surge Protectors

440 V

150 Cel

-40 Cel

MATTE TIN

R-PDSO-C2

1

Not Qualified

120 mA

DO-214AA

e3

30

600 V

260

UL RECOGNIZED

P4802SCLRP

Littelfuse

THYRISTOR SURGE PROTECTOR

SMALL OUTLINE

YES

DUAL

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

C BEND

RECTANGULAR

2

2

Silicon Surge Protectors

150 Cel

-40 Cel

MATTE TIN

R-PDSO-C2

1

120 mA

DO-214AA

e3

40

600 V

260

UL RECOGNIZED

P4802AB64RB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

TIN LEAD

R-PSIP-T2

Not Qualified

e0

290 V

P4802AB64TA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

TIN LEAD

R-PSIP-T2

Not Qualified

e0

290 V

P4802ABL64TA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

150 Cel

-40 Cel

TIN

R-PSIP-T2

1

Not Qualified

e3

290 V

P4802AB61

Littelfuse

THYRISTOR SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

TIN

R-PSIP-T2

1

Not Qualified

e3

290 V

P4802AB61TA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

TIN LEAD

R-PSIP-T2

Not Qualified

e0

290 V

P4802ABL61TA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

2

150 Cel

-40 Cel

TIN

R-PSIP-T2

1

Not Qualified

e3

290 V

P4802ABL60TA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

150 Cel

-40 Cel

TIN

R-PSIP-T3

1

Not Qualified

e3

290 V

P4802AB60RB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

TIN LEAD

R-PSIP-T3

Not Qualified

e0

290 V

P4802AARP

Littelfuse

THYRISTOR SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

20 A

THROUGH-HOLE

RECTANGULAR

2

220 V

2

Silicon Surge Protectors

440 V

150 Cel

-40 Cel

MATTE TIN

R-PSIP-T2

Not Qualified

150 mA

e3

300 V

P4802AB69TA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

TIN LEAD

R-PSIP-T3

Not Qualified

e0

290 V

P4802ABL60RB

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

150 Cel

-40 Cel

TIN

R-PSIP-T3

1

Not Qualified

e3

290 V

P4802ABL69

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

150 Cel

-40 Cel

TIN

R-PSIP-T3

1

Not Qualified

e3

290 V

P4802ABL69TA

Littelfuse

SILICON SURGE PROTECTOR

IN-LINE

NO

SINGLE

SERIES CONNECTED, 2 ELEMENTS

PLASTIC/EPOXY

60 A

220 V

THROUGH-HOLE

RECTANGULAR

2

3

150 Cel

-40 Cel

TIN

R-PSIP-T3

1

Not Qualified

e3

290 V

Silicon Surge Protectors

Silicon Surge Protectors are electronic devices designed to protect electronic equipment from voltage surges and transients caused by lightning strikes, power outages, and other electrical disturbances.

The surge protector is essentially a voltage limiter that is designed to limit the voltage to a safe level that will not damage the electronic equipment. The surge protector works by diverting the excess voltage to a grounding circuit, preventing it from reaching the equipment.

Silicon surge protectors typically consist of a metal oxide varistor (MOV) or a transient voltage suppression (TVS) diode, which are both types of semiconductor devices that can handle high voltages and transient currents. These devices are connected between the power supply and the electronic equipment to be protected.

When a voltage surge or transient occurs, the MOV or TVS diode conducts current and diverts the excess voltage to ground, protecting the electronic equipment from damage. Once the voltage surge or transient subsides, the MOV or TVS diode returns to its normal non-conducting state.